wind turbine blade manufacturing Articles

  • Deep research on China wind turbine blade industry

    It was a professional and depth research report on China Wind Turbine Blade industry. Since 2009, the price of China's wind turbine blade has decreased substantially, which is a big challenge for these new entrants and existing wind turbine blade manufacturers. On the development trends of current domestic wind power equipment market, supply and demand tension has been greatly eased with the ...


  • Tillsonburg: From tobacco farming to building wind turbine blades

    The story of Tillsonburg is probably close to the ideal example of what the Ontario government was looking for when it enacted the Green Energy Act in 2009. A small town of 16,000 people in southwestern Ontario, Tillsonburg’s history is famously celebrated in Stomping Tom Connor’s distinctive drawl when he sung about making seven ...


    By Green Energy Futures

  • Drones for Wind Turbine Inspection

    Unmanned Aerial Vehicles and Inspection Services for Wind Turbines: Global Market Assessment and Forecasts By the beginning of 2015, there were nearly 270,000 individual wind turbines operating globally. The more than 800,000 blades spinning on these turbines are battered by the elements over time and gradually wear out. Deterioration can cause reduced energy ...

  • Wind turbine controlling of the future

    Higher, more robust, more reliable: Parallel to the growing requirements for wind turbines, the requirements for monitoring sensors grow as well. But how can wind sensor manufacturers fulfil these wishes? And how should a future wind sensors look like? After analysing the current conditions and trends on the wind energy market, our CEO Klaus Hirzel compiled a wish list for future wind sensors. ...

  • Case study - Wind turbine manufacturer implements clean air initiative

    Overview When you think about generating electricity from wind, clean energy comes to mind. However, the wind turbine production process can be a major source of air pollution without the proper controls in place. Manufacturing and painting the blades, towers and nacelles requires composite construction material and solvent based coatings. The potential to emit Volatile Organic Compounds ...

  • Evolution of collaborative innovation network in China's wind turbine manufacturing industry

    This paper studies the 'catching–up' process of China's emerging wind turbine manufacturing ecosystem, and analyses the dynamics of the shifting collaborative innovation network for the period 1980–2011. We have focused on the leading wind turbine manufacturers [i.e., manufacturers of entire wind turbine system integrators (EWSIs)], as well as manufacturers of the turbines' sub–ecosystems (i.e., ...


    By Inderscience Publishers

  • 2011-2015 Deep Research Report on China Wind Turbine Blade Epoxy Resin Industry

    “2011-2015 Deep Research Report on China Wind Turbine Blade Epoxy Resin Industry” was professional and depth research report on China Wind Turbine Blade Epoxy Resin industry. This report has firstly introduced Wind Turbine Blade Epoxy Resin definition classification industry chain etc related information. Then introduced Wind Turbine Blade Epoxy Resin manufacturing technology ...


  • Community Wind Power for Renewable Income

    CONSIDERING its incredible history and environmental benefits, wind power is one of the most underutilized sources of renewable energy. Stretching back as early as 200 BC, communities have been harvesting the wind for power. However, the scale and popularity of wind power is only now starting to reach critical mass as concerns of climate change rise and energy usage continues to soar. While ...


    By BioCycle Magazine

  • What’s the Future of R&D in the Wind Industry?

    When the wind industry finally reacted to the world’s financial crisis—it didn’t fully hit us until 2010—at once, we lost both an incredibly vibrant global wind market and sufficiently robust profit margins. The market recovery is rebounding nicely now, thanks largely to government incentives, but profit margins will probably never fully recover—at least, not to the ...


    By Renewable NRG Systems

  • Finland Wind Power Market Capacity & Generation to 2025

    ReportsnReports.com adds report “Wind Power in Finland, Market Outlook to 2025, Update 2014 - Capacity, Generation, Levelized Cost of Energy (LCOE), Investment Trends, Regulations and Company Profiles” to its store.   "Wind Power in Finland, Market Outlook to 2025, Update 2014 Capacity, Generation, Levelized Cost of Energy (LCOE), Investment Trends, ...

  • Integrated solar and wind energy powers oil recovery system

    Recovery of free-product petroleum at the former St. Croix Alumina (SCA) site in Kingshill on St. Croix, VI, is addressing ground-water contamination caused by past releases of fuel and refined petroleum at SCA. The oil recovery system employs wind-driven turbine compressors (WTCs), wind-driven electric generators (WEGs), and photovoltaic (PV) panels to power pneumatic and electric submersible ...

  • Romania Wind Power Market Research Report to 2025, Update 2014

    RnRMarketResearch.com adds report “Wind Power in Romania, Market Outlook to 2025, Update 2014 – Capacity, Generation, Levelized Cost of Energy (LCOE), Investment Trends, Regulations and Company Profiles” to its store.   “Wind Power in Romania, Market Outlook to 2025, Update 2014 Capacity, Generation, Levelized Cost of Energy (LCOE), ...

  • Belgium Wind Power Market 2025: Levelized Cost of Energy (LCOE)

    RnRMarketResearch.com adds report “Wind Power in Belgium, Market Outlook to 2025, Update 2014 – Capacity, Generation, Levelized Cost of Energy (LCOE), Investment Trends, Regulations and Company Profiles” to its store.   “Wind Power in Belgium, Market Outlook to 2025, Update 2014 Capacity, Generation, Levelized Cost of Energy (LCOE), ...


  • The economic benefits of HEPA-grade filtration for gas turbine operation in the power generation industry

    Everywhere we look these days, one message stands above all the rest: energy must be used with greater efficiency Global energy demand is estimated to rise between 25 and 30 percent between now and 2040, fueled by growth in economic output and by a growing population in which billions of people —despite working hard to advance their standards of living — subsequently and inevitably ...


    By AAF International Ltd.

  • Look what’s cooking in the world of renewable energy

    The solar and wind innovations that got us where we are today — and those waiting in the wings — point to a hopeful future. Inside a sprawling single-story office building in Bedford, Mass., in a secret room known as the Growth Hall, the future of solar power is cooking at more than 2,500 °F. Behind closed ...


    By Ensia

  • Rewair saves an hour a day on waste handling - Case Study

    RewAir A/S specialises in developing and producing glass fibre solutions that are used in the production of wind turbines. Yearly 60 tons of waste The glass fibre that is used in the production facility arrives at the factory in Haderslev, Denmark, in large rolls, on which the glass fibre is rolled together with a layer of protective paper. The roll is placed on a cutter, and when ...


    By Bramidan Balers

  • Want low-cost clean energy? Bank on innovation

    In the United States, there is a heated debate about how much government should support renewable energy innovation. While you won’t find anyone who says they don’t value ‘innovation’, the U.S. federal investment in energy innovation across both fossil and renewable technology is still anemic, ...

  • Create new jobs & cut emissions by investing in renewable energy efficiency

    At a time when major US companies are announcing job layoffs almost daily, the renewable energy industry is hiring new workers every day to build wind farms, install rooftop solar arrays, and build solar thermal and geothermal power plants. The output of industrial firms that manufacture the equipment for these energy facilities is expanding by well over 30 percent a year. These investments both ...


    By Earth Policy Institute

  • Negative Power Generation Aspects of Adopting Renewable Sources

    Renewable energy resources are all the rage nowadays on a global scale with the biggest benefit of providing unlimited access without any fear of depletion or running out in the near future. It also provides the edge of saving the continuously decreasing fossil fuel reserves and to protect the planet against the harmful pollution caused by the burning of all non-renewable resources. Some common ...


    By Greenshine New Energy LLC

  • Renewable energy progress report

    What is the Renewable energy progress report and what is its purpose? The Renewable Energy Directive states that a progress report should be issued every two years. The purpose of this progress report is to assess Member States' progress in the promotion and use of renewable energy in line with the 2020 targets. In addition, it contains sections on ...


    By Europa Press Room

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you