wood gasification Articles

  • Co-gasification of wood and polyethylene with the aim of CO and H2 production

    This article describes the gasification of polyethylene–wood mixtures to form syngas (H2 and CO) with the aim of feedstock recycling via direct fermentation of syngas to ethanol. The aim was to determine the effects of four process parameters on process properties that give insight into the efficiency of gasification in general, and particularly into the optimum gasification conditions for the ...


    By Springer

  • Co-gasification of wood and polyethylene with the aim of CO and H2 production

    Abstract  This article describes the gasification of polyethylene–wood mixtures to form syngas (H2 and CO) with the aim of feedstock recycling via direct fermentation of syngas to ethanol. The aim was to determine the effects of four process parameters on process properties that give insight into the efficiency of gasification in general, and particularly into the optimum gasification conditions ...


  • Cleaning Up Gasification Syngas

    Documento sin título ...


    By Merichem Company

  • Exergetic performance assessment of gasification and pyrolysis processes of pre-treated wood board wastes

    This paper investigates exergetic performance of gasification and pyrolysis processes and compares their exergy efficiencies, using the experimental data on a two-step process of thermo-chemical conversion of Wood Board (WB) wastes. The exergy values of biomass samples change from 17.49 MJ/kg to 24.57 MJ/kg, respectively. Hydrogen produced from pyrolysis step of gasification varies between 17 ...


    By Inderscience Publishers

  • Hydrogen-rich synthesis gas production from waste wood via gasification and reforming technology for fuel cell application

    The purpose of this study was to establish a fuel process for an advanced power generation system in which hydrogen-rich synthesis gas, as the fuel for the molten carbonate fuel cell (MCFC), can be extracted from biomass via gasification and reforming technologies. Experiments on waste wood gasification were performed using a bench-scale gasification system. The main factors influencing hydrogen ...


    By Springer

  • Waste Wood Case History

    The Customer The Company is a leader in the development and implementation of state of the art timber gasification. The Process The Company uses a gasification process that breaks down different types of waste wood such as wood chips, pallets, sawdust and other non-virgin wood and converts it into a clean producer gas. The producer gas fuels the turbine ...

  • Preliminary studies of lignocellulosics and waste fuels for fixed bed gasification

    This study was carried out to understand the decomposition behaviour of a range of biofuel and waste feedstock during gasification in a downdraft gasifier. A laboratory scale large sample thermogravimetric analyser (LSTA) is used which allows the data on burn-out characteristics of different fuel particles to be measured under agitated conditions. The conditions chosen simulate the combustion ...


    By Inderscience Publishers

  • The development of biomass gasification technology towards market penetration in China

    Biomass is the second most frequently used fuel, after coal, in China, which accounts for 20% of primary energy consumption. Though the main usage of biomass is for household cooking, the newly developed biomass gasification technology, especially the circulating fluidized bed gasification (CFBG) technology, has laid the foundations for allowing biomass gasification industry penetration into the ...


    By Inderscience Publishers

  • Possibility of biomass gasification in tea manufacturing industries in Assam, India

    Tea manufacturing industries in India use natural gas, tea drying oil, wood, and coal for process heat. India is the second largest producer of tea [(1,137.07, China 1,761.00) million kilogram] in 2012. About 0.6–1.2 kg of coal is required to produce one kilogram of dried tea with average moisture of 2.5–3 percentage (w.b.). Biomass gasification is an established renewable energy technology for ...


    By Inderscience Publishers

  • Research on gasification process of loose biomass material with oxygen-enriched air in fluidised bed gasifier

    Fluidised bed gasification technology with oxygen-enriched air suitable for gasifying loose biomass materials was developed. Gasification experiments with different biomass materials such as rice straw, rice hull, wheat straw, sawdust and municipal wastes, were carried out. The tests showed that biomass materials can be gasified continuously at a temperature between 600 and 750°C. The heating ...


    By Inderscience Publishers

  • Case study - ElectraTherm green machines generate electricity from wood waste at mill in Oregon

    ElectraTherm commissioned its second Green Machine at an integrated wood products mill in Wallowa, Oregon. Together, the two machines operate off the waste heat of a biomass boiler to generate emission-free electricity. Integrated Biomass Resources (IBR) processes small-diameter timber into various wood products, such as firewood and fence posts. Wallowa Resources Community Solutions, Inc. ...


    By ElectraTherm

  • Feasibility analysis for biomass in cities, counties and facilities

    The commercial waste industry includes all those who collect waste from the simplest “collect waste and transport to a landfill” to the more complex “collect waste and process into re-usable components and energy.” This article will cover how we can collect material and fuel a clean energy system for our immediate future, while saving clean water and air. ...


    By Waste Advantage Magazine

  • Energy from biomass and waste – case studies in China

    With its vast territory and abundant biomass resources, China appears to have suitable conditions to develop biomass energy. It has long been recognised that it is important to develop advanced technologies for conversion of biomass into clean and convenient fuels in order to raise the efficiency of biomass energy utilisation and alleviate air pollution. Through past efforts some progress in ...


    By Inderscience Publishers

  • Using Venturi Scrubber Technology for Syngas Cleaning

    As part of our nation's program to reduce dependence on fossil fuels, various gasification technologies are being applied. These processes take renewable organic material and, through the application of heat and pressure, convert the materials into syngas for further use. Arguably, in nearly all of these processes, the most critical design aspect is the reliable and efficient removal of ...


    By Bionomic Industries Inc.

  • Renewable energy in chemical industry – the case of formic acid production

    This paper analyses the economical viability of replacing fossil energy by renewable sources by taking CO2 emission legislation into account. A single chemical industry case, formic acid production, is studied in a tangible manner to provide a concrete example for industrial managers and legislators. The practical case was supported by examining scientific and other databases. This study ...


    By Inderscience Publishers

  • Case Study: MSW Disposal System Adds Gasifier

    Unit Will Help Community with Odor Control And Provide High-Carbon Biochar For Revenue A third municipal deployment of PHG Energy’s gasification technology has been approved by Sevier Solid Waste, Inc. The East Tennessee regional authority operates an industry-recognized and innovative garbage composting plant processing more than 100,000 tons annually from the Sevierville, ...


    By PHG Energy, LLC

  • Bioenergy opportunities in the pulp and paper and sawmill industries

    Fernando Preto said the Canada Centre for Mineral and Energy Technology (CANMET) Energy Technology Centre in Ottawa is “not a fundamental research lab…. We help industry develop technologies.” The Biomass and Renewables Group “took a different approach, asking, ‘What’s the converted value of one dry tonne of wood?’” Preto’s team made a number of assumptions about pellet-generated heat, power, and ...

  • Case Study: Replacing Natural Gas For Industry

    Renewable Energy Systems Offset Fossil Fuels with Sustainable Fuel Supply PHG Energy’s patented downdraft gasification systems were first deployed for for Boral Brick Manufacturing at facilities in Alabama, Georgia and Tennessee. The technology was used to offset natural gas costs, which were then consistently topping $10 per decatherm. Twelve of the 8-ton/day gasifiers were ...


    By PHG Energy, LLC

  • Case Study: New Tennessee Waste-To-Energy Plant

    Clean Conversion Infrastructure Addition To Give Lebanon Renewable Energy PHG Energy will provide the vibrant and growing Middle Tennessee city of Lebanon with a new method of sustainable waste disposal and renewable energy production when this system is completed in 2016. Commercial wood waste that was previously dumped into in area landfills, hundreds of tons of scrap tires, and ...


    By PHG Energy, LLC

  • The feasibility of producing alcohol fuels from biomass in Australia

    Apart from cost, the net production of energy is the most important factor in evaluating the feasibility of producing renewable fuels from woody biomass. Unlike sugar, the effort required to make woody materials fermentable is considerable, and has been a major barrier to the use of such materials to produce renewable fuels. The Energy Profit Ratio (EPR) of fossil fuels is declining rapidly as ...


    By Inderscience Publishers

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you