wood heating Articles

  • An Integral Model for Wood Auto-ignition under Variable Heat Flux

    A one-dimensional integral model that predicts the auto-ignition time of wood under linearly increasing radiant heat flux is developed. The solution to the integral model for the ignition time is compared with measured data. Reasonable comparative results are shown for the ignition time of wood exposed to different heat flux increase rates (HFIR). Both the solutions and the measured data also ...


    By SAGE Publications

  • Waste Wood Case History

    The Customer The Company is a leader in the development and implementation of state of the art timber gasification. The Process The Company uses a gasification process that breaks down different types of waste wood such as wood chips, pallets, sawdust and other non-virgin wood and converts it into a clean producer gas. The producer gas fuels the turbine ...

  • Wood briquettes packed full of energy

    Konolt manages its energy output using RUF briquetting machinery Timber processors Konold are improving their energy balance with the help of their RUF briquetting machine. Wood waste is being pressed into briquettes to create a uniform combustible material. The heat they produce is then used for process heating and to heat their premises, with the residual heat being used to generate ...

  • Wood shavings become coveted heating material / RUF Briquetting Press - Case Study

    RUF briquetting press saves carpenters from having a large shavings bunker and brings additional revenues. Master Carpenter Hermann Schreder knows problems with troublesome wood shavings first-hand. He has ended it three years ago and introduced an ideal solution within the scope of a business extension: With the RUF briquetting system, he compresses wood shavings to compact wood briquettes, ...

  • Exergy analysis of a wood-stack during dehumidifier drying

    We present a first order model of airflow within the wood stack of a timber dryer during the constant-rate drying period, allowing the exergy destruction and entropy generation rates to be determined for heat, mass and momentum transfer. The effects of varying timber stack and airflow variables on the entropy generation rate are determined. We find that heat transfer is the dominant contribution ...


    By Inderscience Publishers

  • Case study - JJO wood waste – biomass

    A UK leading producer of kitchens and bathroom furniture invest in the future of no costs for the disposal of wood waste and no oil or gas bills for heating of the total company site premises. J J O PLC – manufacturer of Colonial Kitchens, Colonial Bedrooms, eco Kitchens and eco Bathrooms. Founded over 100 years ago and now the leading supplier to many of the best outlets within the ...


    By Mawera (UK) Ltd

  • Wood waste case study - Pronto Joinery

    A joinery company in Norwich has replaced three wood waste heaters with brand new ones from Wood Waste Technology. Pronto Joinery provides both the general public and trade with wooden replacement windows and doors from its purpose built factory in Horsford. The company has used wood waste burners for many years, but wanted to replace its existing heaters with newer ones to benefit from enhanced ...


    By Wood Waste Technology Ltd

  • Heavy metals in wet scrubber residue from a medium–sized (32 MW) municipal district heating plant incinerating wood and peat in a fluidised bed boiler

    Due to the low total concentrations of heavy metals and extractable compounds, it is recommended that the wet scrubber residue be used as a construction agent instead of being disposed of in landfills. According to five–stage sequential extraction, the highest concentrations of most of the heavy metals occurred in the residual fraction (i.e., HF + HNO3 + HCl), which means that ...


    By Inderscience Publishers

  • Removal mechanism of endosulfan sorption onto wood charcoal

    Endosulfan is among the most widely used pesticides in developing countries and other parts of the world and has been found to contaminate various parts of the environment, including drinking water sources. In an earlier study to find a suitable adsorbent to remove endosulfan, wood charcoal was found to give promising results. In the present study, the process controlling the rate of endosulfan ...


    By Inderscience Publishers

  • Eliminating VOC From Wood Industry Processes

    ELIMINATING VOC FROM WOOD INDUSTRY PROCESSES As regulations controlling VOC and the environment become increasingly strict at local, national and international level, manufacturers in an increasing range of industries are having to consider appropriate action. The wood industry is no exception. In the manufacture of moulded wooden doors, for example, wood shavings and sawdust are bonded together ...


  • What is the Difference between Wood Pellets and Corn Pellets?

    Electric, gas and oil are the traditional methods to heat the house, while they are very expensive. Now the alternative sources such as wood and corn pellets are emerging. These alternative sources of fuel are both environmental friendly and renewable. In the battle of fuel sources, each choice has its own advantages and disadvantages.       The word corn ...


  • Wood waste case study - Zero 1 Exhibitions

    A joinery company in Norwich has replaced three wood waste heaters with brand new ones from Wood Waste Technology. Pronto Joinery provides both the general public and trade with wooden replacement windows and doors from its purpose built factory in Horsford. The company has used wood waste burners for many years, but wanted to replace its existing heaters with newer ones to benefit from enhanced ...


    By Wood Waste Technology Ltd

  • Wood Waste SPB Moulds - Case Study

    A mould-making factory in Stoke on Trent is making and saving money since purchasing a briquetting machine from Gross UK and a wood waste heater from Wood Waste Technology. Since 2008, Stoke on Trent company SPB Moulds has made patterns for metal casting, and supplies foundries across the UK. Whilst looking at ways to reduce business costs, the team spotted an opportunity in the market to supply ...


    By Wood Waste Technology Ltd

  • Wood, Yard Trimmings Recycler Grows by Heaps and Bounds

    GRIND-ALL has been in existence - in one form or another - since 1992. Originally owned by Paul Robins, and operated under the name East Coast Wood Recycling, the company, based in Mosely, Virginia near Richmond, was solely focused on selling wood products at the wholesale level. Three years later Robins joined forces with Robbie Urbine, whose expertise in retail sales allowed the company to open ...


    By BioCycle Magazine

  • Wood sawdust dryer machine from Fote Machinery

    The advantages of rotary drum sand dryer are as follows: 1. High technical content, self insulation cylinder body, 80% thermal efficiency (single- cylinder dryer is only 35%), coal saving is 68% than single-cylinder dryer and output increases 100%. 2. The length is good for technical layout, 60% shorter than single-cylinder dryer. Also it’s ...


    By Fote Machinery

  • Wood waste case study - Jukes Holdings

    The MD of a group of independent coffin manufacturers has seen the light in recycling wood waste, and is saving thousands of pounds in waste disposal charges and heating costs by rolling out wood waste heaters across his companies. Stewart Jukes, MD of Jukes Holdings Ltd was so impressed with a wood waste heater purchased for one of his companies, Brian Reid & Son in Scotland, that he has ...


    By Wood Waste Technology Ltd

  • Wood Preserving Industry - Pollution Prevention Guidelines

    Introduction Pollution Prevention Guidelines to provide technical advice and guidance to staff and consultants involved in pollution-related projects. The guidelines represent state-of-the-art thinking on how to reduce pollution emissions from the production process. In many cases, the guidelines provide numerical targets for reducing pollution, as well as maximum ...


    By The World Bank

  • Pumps for synthetic heat-transfer liquids

    As soon as the temperature in a heat-transfer system becomes too high for water, a plant operator must choose between petroleum-based or synthetic oils as the heat-transfer liquid. When modern petroleum oils are used, systems with feed temperatures up to about 300 °C can stay in service for their entire service life with one filling and with virtually no maintenance. Once feed temperatures ...


    By ALLWEILER GmbH

  • WEISS provides for the heat - and disposes of the waste case study

    The very first time PLIMOB learnt about Weiss was in 1995 at which time contacts at IKEA told about combustion plants from WEISS. IKEA is the most important customer for PLIMOB so the management listened to the recommendations. PLIMOB is producing wood furniture; large quantities of wood chips and sawdust are a spin-off effect from their production. Traditionally wood-working industries – ...


    By Weiss A/S

  • Automatic waste wood processing in the production of kitchen worktops case study

    Nolte Küchen GmbH & Co.KG, an established kitchen manufacturer with its registered office in Löhne has commissioned a new production plant for the manufacture of kitchen worktops at their location in Melle early in 2008.The company uses shredders from WEIMA Maschinenbau GmbH in Ilsfeld for processing waste wood accumulating from the manufacturing process in the highly-automated ...


    By WEIMA

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you