wood pyrolysis Articles

  • Pyrolysis

    Introduction: Pyrolysis is formally defined as chemical decomposition induced in organic materials by heat in the absence of oxygen. In practice, it is not possible to achieve a completely oxygen-free atmosphere; actual pyrolytic systems are operated with less than stoichiometric quantities of oxygen. Because some oxygen will be present in any pyrolytic system, nominal oxidation will occur. If ...

  • Exergetic performance assessment of gasification and pyrolysis processes of pre-treated wood board wastes

    This paper investigates exergetic performance of gasification and pyrolysis processes and compares their exergy efficiencies, using the experimental data on a two-step process of thermo-chemical conversion of Wood Board (WB) wastes. The exergy values of biomass samples change from 17.49 MJ/kg to 24.57 MJ/kg, respectively. Hydrogen produced from pyrolysis step of gasification varies between 17 ...


    By Inderscience Publishers

  • Waste tire pyrolysis plant with detail introduction

    Pyrolysis plant: With the global warming and usage of tire and rubber products, it has become unstoppable trend to recycle these solid wastes and convert them into fuel oil in pyrolysis way which adopts green environment friendly technology. Huayin company began to research waste tire pyrolysis plant since 1993. Now we did it, we invented the waste tyre recycling machinery to ...


  • How to build waste plastic pyrolysis plant

    Preparation of raw material: The raw material can be waste tire, tyre, plastic or scrap rubber. All if the above wastes can be processed by our machine. The following are details: Separate the ingredient which can not be refined from waste plastic, such as: soil, wood, stone, brick etc. If the raw materials are paper mill’s waste, separate the pulp. If there is water in raw material, should ...


  • Turnkey Manufacturer & Supplier of Large scale Waste Plastic & Tire Pyrolysis Plant Machinery

    We establish large scale pyrolysis plants on turnkey basis. The total turnkey supply includes of machinery designing & simulation, equipment manufacturing, supply, installation, commissioning, technology transfer and operational training. We are one of the prominent leaders in establishing pyrolysis plants on turnkey basis.   Advantages of pyrolysis plants manufactured & ...

  • Behavior of Flame Spread Downward over Thick Wood Sheets and Heat Transfer Analysis

    To investigate the flame spreading mechanism over charring materials under natural convection, wood sheets from 0.9 to 3 mm thickness have been chosen. The variation of mean flame spread velocity V with thickness  is measured. Typical flame shapes over the wood surfaces are recorded using CCD. The temperature fields in the gas phase are examined by a set of fine thermocouples. On the basis ...


    By SAGE Publications

  • Paper fibers as a carbon source for the de novo formation of polychlorinated dioxins and furans

    The formation of polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDDs/Fs) from carbon that was produced by the pyrolysis of paper fibers and from wood charcoal was investigated experimentally. Fibers obtained from filter paper were pyrolyzed at 300° and 800°C to produce low- and high-temperature carbon samples. The two types of carbon and wood charcoal were mixed with silica ...


    By Springer

  • Paper fibers as a carbon source for the de novo formation of polychlorinated dioxins and furans

    Abstract  The formation of polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDDs/Fs) from carbon that was produced by the pyrolysis of paper fibers and from wood charcoal was investigated experimentally. Fibers obtained from filter paper were pyrolyzed at 300° and 800°C to produce low- and high-temperature carbon samples. The two types of carbon and wood charcoal were ...


  • Shredding Puzzle in the Process of Waste Material Recycling

    There are two main types of waste fabric waste: (1) the factory in the leather fabric processing and production of leather fabric can not be 100% of the use, so in the production of some by-products or waste, such as tailoring and sewing clothes when the extra cloth, cloth and other waste , As well as in the synthesis of chemical fiber in the process of excess waste and so ...


    By Harden Industries Ltd.

  • Ivey International Inc. successfully emulsifies BioOil with hydrocarbon diesel

    DynaMotive Energy Systems Corporation (OTCBB: DYMTF) announced today that Ivey International Inc, a British Columbia environmental solutions company working with DynaMotive, has successfully emulsified BioOil with hydrocarbon diesel. The goal of the emulsification testing is to allow for co-burning of a BioOil/ diesel mix in stationary engines without requiring significant modifications to them. ...


    By Ivey International Inc.

  • The Process Of Making Charcoal From Straw

    Even though it can be done to utilize organic material in order to create charcoal manually, there are actually machines that could try this for you personally. Straw charcoal is a thing which is easily accessible, that lots of people can purchase from local stores, an alternative choice to using wood. These straw charcoal briquettes are generally long fit, ...


  • Refuse Derived Fuel, Current Practice and Perspectives

    Untitled Document Summary I OBJECTIVES The objectives of the project were to undertake a survey on the current ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you