wood waste Articles

  • Wood waste recycling

    A customer has built a very successful business grinding wood waste banned from the local landfill and selling the wood fiber. They operate a system that was fully engineered and manufactured by WSM, including conveyors, magnetics, WSM 48-10 Disc Screen, WSM 4064BH Horizontal Hogging system, and support structures. A heavy duty vibrating conveyor feeds the wood waste into the hog. Ground material ...

  • Wood waste market in the UK

    The purpose of this project was to undertake both market and economic assessments for wood waste in the UK. The two sections of this report are described separately below. This section first identified gaps in wood waste estimates and then presented an approach for closing identified gaps. A review of current publicly available literature confirmed that there are a range of estimates available ...

  • Waste Wood Case History

    The Customer The Company is a leader in the development and implementation of state of the art timber gasification. The Process The Company uses a gasification process that breaks down different types of waste wood such as wood chips, pallets, sawdust and other non-virgin wood and converts it into a clean producer gas. The producer gas fuels the turbine ...

  • Wood waste product

    A landfill needed a way to reduce their waste stream volume, increase the life of their landfill, and recover a recyclable, marketable product. Wood and yard waste material comprise up to 20% of their entire waste stream volume. Processing and recycling this material will extend the life of the landfill by 20 years. They chose WSM's Model 4864BH Horizontal Hogging System with a customized feed ...

  • Concentrations of organic wood preservatives in wood chips produced from wood wastes

    We investigated the concentrations of wood preservatives in the wood chips produced in wood-waste processing facilities in 1988, 1998–1999, and 2001–2002. Among the wood preservatives used in the past in Japan, halophenols, including PCP, chlordane, and chlorpyrifos, had comparatively high detection rates and high average concentrations in the wood chips produced in 2001–2002. Aldrin and endrin ...


    By Springer

  • Wood Waste Processing — Under Duress

    In mid-January 2012, a winter storm moving inland from the Pacific Ocean blanketed an 11-county area of Northwest Washington with several inches of heavy wet snow, followed by a thick layer of ice that coated everything from sidewalks to skyscrapers. Nicknamed “Snowmageddon,” by locals, the storm first walloped the Seattle and Tacoma metro areas, shattering a 60-plus-year record ...


    By BioCycle Magazine

  • Wood waste case study - Zero 1 Exhibitions

    A joinery company in Norwich has replaced three wood waste heaters with brand new ones from Wood Waste Technology. Pronto Joinery provides both the general public and trade with wooden replacement windows and doors from its purpose built factory in Horsford. The company has used wood waste burners for many years, but wanted to replace its existing heaters with newer ones to benefit from enhanced ...


    By Wood Waste Technology Ltd

  • Wood Waste SPB Moulds - Case Study

    A mould-making factory in Stoke on Trent is making and saving money since purchasing a briquetting machine from Gross UK and a wood waste heater from Wood Waste Technology. Since 2008, Stoke on Trent company SPB Moulds has made patterns for metal casting, and supplies foundries across the UK. Whilst looking at ways to reduce business costs, the team spotted an opportunity in the market to supply ...


    By Wood Waste Technology Ltd

  • Wood waste case study - Pronto Joinery

    A joinery company in Norwich has replaced three wood waste heaters with brand new ones from Wood Waste Technology. Pronto Joinery provides both the general public and trade with wooden replacement windows and doors from its purpose built factory in Horsford. The company has used wood waste burners for many years, but wanted to replace its existing heaters with newer ones to benefit from enhanced ...


    By Wood Waste Technology Ltd

  • Case study - JJO wood waste – biomass

    A UK leading producer of kitchens and bathroom furniture invest in the future of no costs for the disposal of wood waste and no oil or gas bills for heating of the total company site premises. J J O PLC – manufacturer of Colonial Kitchens, Colonial Bedrooms, eco Kitchens and eco Bathrooms. Founded over 100 years ago and now the leading supplier to many of the best outlets within the ...


    By Mawera (UK) Ltd

  • Wood waste case study - Jukes Holdings

    The MD of a group of independent coffin manufacturers has seen the light in recycling wood waste, and is saving thousands of pounds in waste disposal charges and heating costs by rolling out wood waste heaters across his companies. Stewart Jukes, MD of Jukes Holdings Ltd was so impressed with a wood waste heater purchased for one of his companies, Brian Reid & Son in Scotland, that he has ...


    By Wood Waste Technology Ltd

  • Treatment of Acid Mine Effluents Using a Wood- Waste Cover

    At the East Sullivan site, wood wastes covering the abandoned mine tailings impoundment prevent sulfide oxidation by creating an anoxic environment. The addition of coarse ligneous wastes and their high permeability favour infiltration, resulting in a water table rise that maintains most tailings under water saturation and thus provides an additional protection against sulfide oxidation. ...


    By Hydrogeochem Env. Inc.

  • Tub grinders help city of bakersfield grow wood waste program

    In its early stages, the wood waste recycling program employed by the Solid Waste Division of Bakersfield’s Dept. of Public Works (DPW) was bare bones at best. Implemented as a means to both lower the volume of material going to landfill and, at the same time, generate a product that could be used by area residents, initial volumes collected and processed were relatively low. Processing was ...


  • Automatic waste wood processing in the production of kitchen worktops case study

    Nolte Küchen GmbH & Co.KG, an established kitchen manufacturer with its registered office in Löhne has commissioned a new production plant for the manufacture of kitchen worktops at their location in Melle early in 2008.The company uses shredders from WEIMA Maschinenbau GmbH in Ilsfeld for processing waste wood accumulating from the manufacturing process in the highly-automated ...


    By WEIMA

  • Las Vegas DirtWorkz, Inc.: Using the City’s wood waste to farm the desert

    Ray Becerra knows a thing or two about recycling, reusing and repurposing waste materials. You might even say it’s in his blood. Becerra has spent his entire life around landfills and farming operations, and he wears his passion for recycling waste materials on his sleeve. His enthusiasm for dust, dirt and debris, says Becerra, comes from his father, an avid recycler who was involved in the ...

  • Less fines improves productivity in waste wood shredding - Case Study

    A customer in France was shredding waste wood with two Doppstadts. After processing the wood twice, up to 20% of the total outcome was worthless fine wood dust. With TANA Shark the problem with the dust was eliminated and productivity of the process was improved respectively. Steady burning process in a heating unit requires pure wood particles ...


    By Tana Oy

  • Wood waste becomes bigger part of picture for Colorado materials recycler

    Since it entered the materials recycling arena in 1979, Oxford Recycling has successfully focused its efforts on bringing new life to concrete, asphalt and scrap tires. In 1999, the Englewood, Colorado-based company began taking in wood waste as part of its overall operation, and chose to subcontract the grinding part of that business. A recent significant upturn in volumes prompted Oxford’s ...


  • Wood Recycling Firms Shift Markets

    In 1995, Apollo Wood & Metal was one of the many wood processors in southern California struggling to survive the downturn in the cogeneration business. Today, Apollo, located in Fontana (about 40 miles east of Los Angeles), is an entirely different company. It has a new name, Apollo Wood Recovery, and a different market: medium density fiberboard (MDF). In fact, the only thing that hasn’t ...


    By BioCycle Magazine

  • Wood briquettes packed full of energy

    Konolt manages its energy output using RUF briquetting machinery Timber processors Konold are improving their energy balance with the help of their RUF briquetting machine. Wood waste is being pressed into briquettes to create a uniform combustible material. The heat they produce is then used for process heating and to heat their premises, with the residual heat being used to generate ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you