Workplace Exposure Limit Articles on Environmental XPRT

Particle and Fibre Toxicology Publishes Article Concerning Workplace Exposure to CNTs

On October 21, 2013, Particle and Fibre Toxicology posted an article entitled “Carbon nanotube dosimetry: from workplace exposure assessment to inhalation toxicology.” The authors, who are affiliated with the National Institute for Occupational Safety and Health (NIOSH), note that there are currently no ...

Oct. 24, 2013

By Bergeson & Campbell, P.C.

How to Deal with Asbestos Exposure in Your Workplace: Advice for Managers

Industrial mangers are faced with hundreds of responsibilities each day. Ensuring worker safety should be at the top of their priority list – especially when it comes to asbestos. Do you work in management at a construction site or industrial occupation? Here’s what you can do to promote asbestos safety: Conduct ...

Jun. 13, 2012

By Intelex Technologies Inc.

UK Report Assesses Workplace Exposure and Control Measures During the Manufacture and Handling of Engineered Nanomaterials

The United Kingdom’s Health and Safety Laboratory (HSL) of the Health and Safety Executive (HSE) prepared a report entitled Summary of work undertaken to assess workplace exposure and control measures during the manufacture and handling of engineered nanomaterials. The report notes that HSE and HSL attempted to identify and ...

Aug. 18, 2015

By Bergeson & Campbell, P.C.

Putting infection control into practice in the workplace

Healthcare workers are, like patients, subject to illness from a variety of airborne pathogens common to hospital settings. This risk increases during construction and renovation, as these endeavors release dust as well as disease-inducing microbes into the surrounding environment. Since more than one in five workplace illnesses in private industry occur in a hospital setting , hospitals ...

Jan. 1, 2009

By Environmental and Engineering Solutions, Inc.

Noise at Work, Workplace Noise and Issues with Noise

Noise at Work Regulations to Control Workplace Noise The Control of Noise at Work Regulations (2005) became effective in 2006. The Regulations are relevant to all employers who operate a noisy workplace and should be an integral part of any health and safety strategy. ...

Jun. 12, 2014

By Pulsar Instruments plc

Overview of Airborne metals regulations, exposure limits, health effects, and contemporary research case study

One of the consequences of the current state of industrialization and an increasing demand for modern conveniences and improved quality of life has been an increased exposure to air pollutants from industrial activities, traffic, and energy production. Regulatory bodies, such as federal, state, and local environmental protection agencies, are responsible for assuring the public that the air is ...

May 9, 2010

By Cooper Environmental Services

Embalmers risk dangerous exposure to Formaldehyde

Embalmers can be at risk of dangerous exposure to Formaldehyde. ...

Jul. 28, 2011

By PPM Technology

Workplace Monitoring: Who, What, When, Why, How?

In my previous articles in this series for SHP readers, I have focussed on the need for current attitudes to general health and safety processes to change and emphasised the importance of regular monitoring. The best way to combat those ‘hidden killers’ and protect our workforces is to increase awareness of the benefits of regular monitoring and detection. Employees then need to ...

Oct. 1, 2016

By Casella

Monitoring Airborne Contaminants in Workplace Atmospheres, Using Sampling Devices and GC or HPLC

Workers' exposure to hazardous substances must be held within acceptable limits. Therefore, airborne contaminant vapor and particles (including aerosols) in industrial atmospheres must be monitored. In the United States, the National Institute for Occupational Safety and Health (NIOSH) and the Occupational Safety and Health Administration (OSHA) offer, for many such substances, specific ...

Dec. 31, 1997

By MilliporeSigma

How to capture noise exposure levels of staff with unpredictable work patterns?

Pulsar Instruments has made assessing and capturing the true noise exposure of workers in a range of settings simple with its innovative noise doseBadge: Model 22. This revolutionary personal noise dosimeter is a self-contained device ...

Jul. 22, 2013

By Pulsar Instruments plc

Keeping Healthcare/SPD Workers Safe from Exposure: 2 Very Different Options

Continuous Monitoring vs. Badges Badges are designed to provide the Time Weighted Average (TWA) data for the total exposure period. They contain an absorption medium that reacts with or absorbs and holds the target chemical from the air to be analyzed later, which indicates the exposure after the fact. Badges, sample tubes, and wet chemical methods were the predominant technologies for monitoring ...

Dec. 7, 2016

By ChemDAQ, Inc.

NIOSH Publishes Draft CIB on Health Effects of Occupational Exposure to Silver Nanomaterials, Will Hold Public Meeting

On January 21, 2016, the National Institute for Occupational Safety and Health (NIOSH) announced the availability of a draft NIOSH Current Intelligence Bulletin: Health Effects of Occupational Exposure to Silver Nanomaterials. The draft Current Intelligence Bulletin (CIB) includes a review and assessment of the ...

Jan. 22, 2016

By Bergeson & Campbell, P.C.

NIOSH Announces Sampling Strategy to Help Identify Potential Nanomaterial Exposure in an Occupational Setting

On November 1, 2016, the National Institute for Occupational Safety and Health (NIOSH) published a blog item entitled “Never fear! NEAT 2.0 is here! — How to perform nanomaterial exposure assessment in the workplace.” NIOSH notes that in 2009, it developed and was the first to recommend using the nanoparticle ...

Nov. 2, 2016

By Bergeson & Campbell, P.C.

Industrial hygiene assessment of a large chemical manufacturing facility – Case Study

Challenge: Antea®Group was contracted by a large international chemical manufacturing organization to provide a plant-wide industrial hygiene assessment of chemical and noise exposures within their facility. The overall objective of the project was to evaluate worker exposures, compare results as to compliance with applicable regulations and guidelines, and to provide ...

Nov. 18, 2015

By Antea Group - USA

What is the difference between a REL and a PEL?

There is often confusion between exposure limits put out by different agencies even within the same administration. For example, here the National Institute for Occupational Safety and Health (NIOSH) establishes Recommended Exposure Limits (RELs) whereas the Occupational Safety and Health Administration (OSHA) issues Permissible Exposure Limits (PELs). Realizing the difference between the two is ...

Feb. 21, 2017

By ChemDAQ, Inc.

Toxic formaldehyde very common in homes

EMSL Analytical provides formaldehyde testing solutions for industry and the public. Formaldehyde can be found in most homes across the country. The chemical is commonly used to manufacture numerous building materials and household items. The most significant source of formaldehyde in most homes is from pressed wood products made with formaldehyde containing adhesives. According to the EPA, “High ...

Aug. 13, 2009

NIOSH Publishes PPOP on Nanotechnology Research Center

On June 15, 2016, the National Institute for Occupational Safety and Health (NIOSH) posted a number of Program Performance One-Pagers (PPOP), including a May 2016 PPOP on the NIOSH Nanotechnology Research Center (NTRC). The PPOP states that the NTRC focuses on increasing understanding of hazards and related health risks to ...

Jun. 24, 2016

By Bergeson & Campbell, P.C.

California’s Prop 65 and Cadmium Public Health Dangers

In 1986, California voters approved an initiative to address increasing concerns about exposure to toxic chemicals. That initiative, the Safe Drinking Water and Toxic Enforcement Act of 1986, is better known by its original name of Proposition 65. Proposition 65 requires businesses to notify Californians about significant amounts of chemicals in the products they purchase, in their homes or ...

Jul. 6, 2011

By EMSL Analytical, Inc.

Wireless monitoring for a safe indoor environment

This article discusses the benefits of wireless technology for continously monitoring the indoor environment. In striving for the construction of energy efficient and cost-effective buildings, the imperative issue of the buildings Indoor Air Quality (IAQ) is often overlooked. This can often lead to a unhealthy indoor environment and even to conditions such as Sick Building Syndrome (SBS) or other ...

Aug. 18, 2010

By PPM Technology

Aligning chemicals labeling with global rules involves major efforts

The Occupational Safety and Health Administration (OSHA) began the Herculean task of aligning the U.S."s Hazardous Communication Standard (HCS) with the United Nations Globally Harmonized System of Classification and Labeling of Chemicals (GHS) in September 2009. GHS provides harmonized criteria for classifying chemicals according to their health and physical hazards, and specifies hazard ...

May 18, 2010

By Bergeson & Campbell, P.C.

Subscribe to our eBulletins

Add Supplier Profile