workplace monitoring Articles

  • Ergonomics in the Workplace

    Work-related musculosketal disorders (MSDs) are one of the most frequently reported cases of lost or restricted work time and can be significantly reduced by properly fitting a job to a person, also known as the study of ergonomics. Ergonomics involves evaluating the physical aspects of an environment (e.g. workstations) as well as the way in which people work to help prevent MSDs. MSDs, ...


    By EHS Insight

  • Workplace Monitoring: Who, What, When, Why, How?

    In my previous articles in this series for SHP readers, I have focussed on the need for current attitudes to general health and safety processes to change and emphasised the importance of regular monitoring. The best way to combat those ‘hidden killers’ and protect our workforces is to increase awareness of the benefits of regular monitoring and detection.  Employees then need to ...


    By Casella

  • Multi-Stage Air Quality Monitoring in the Workplace

    CAS DataLoggers recently supplied the environmental datalogging solution for a factory with a small series of office rooms experiencing serious air quality issues. Employees reported headaches during the work day, indicating a possible lack of adequate ventilation. These workspaces were located next to the busy factory floor which caused an incidental ...


    By CAS DATALOGGERS

  • Simultaneous determination of PM fractions, particle number and particle size distribution in high time resolution applying one and the same optical measurement technique

    Abstract The Fidas fine dust monitoring systems comprise an optical aerosol spectrometer, which is characterized by very good instrument characteristics, and utilize a sophisticated approach to convert the measured information on particle number and particle size into mass concentrations. As monitoring of PM requires reliable and quality-controlled performance of the measuring systems, ...


    By Palas GmbH

  • Heat Stress In The Workplace

    Heta stress monitoring, why you should monitor, effects of heat stress and how to combat it in the workplace. Why should you measure heat stress? If you or your employees work in hot environments you may be susceptible to heat stress. Heat stress us caused when the temperature of a surround area or the core body temperature is raised resulting in dangerous high levels. ...


    By Shawcity Limited

  • Nitrogen Demand Increases for Semiconductor: How Safe Are You?

    As users demand ever-smaller smartphones and better televisions, semiconductor manufacturing plants are tasked with developing new products faster and using new materials. Key to the continued success of the semiconductor industry are inert gases, which include nitrogen and argon. When used safely, both nitrogen and argon play a number of important roles within the semiconductor ...

  • Monitoring Airborne Contaminants in Workplace Atmospheres, Using Sampling Devices and GC or HPLC

    Workers' exposure to hazardous substances must be held within acceptable limits. Therefore, airborne contaminant vapor and particles (including aerosols) in industrial atmospheres must be monitored. In the United States, the National Institute for Occupational Safety and Health (NIOSH) and the Occupational Safety and Health Administration (OSHA) offer, for many such substances, specific ...


    By Sigma-Aldrich Co., LLC

  • Putting infection control into practice in the workplace

    Healthcare workers are, like patients, subject to illness from a variety of airborne pathogens common to hospital settings. This risk increases during construction and renovation, as these endeavors release dust as well as disease-inducing microbes into the surrounding environment. Since more than one in five workplace illnesses in private industry occur in a hospital setting , hospitals ...

  • In-depth workplace noise risk assessments

    Don’t miss a thing with a custom-made noise measurement kit Pulsar Safety Professional System: the-all-in one solution to noise measurement Pulsar Instruments’ Safety Professional noise measurement system offer Safety, Health, Environmental and Quality (SHEQ) experts a custom-made solution for resolving their complex workplace noise risk ...


    By Pulsar Instruments plc

  • A Two Channel Gas Detector for Monitoring Hazardous Gases in the Workplace

    The potential for exposure to hazardous gases is a concern in many workplace environments. To ensure the safety of the workers, equipment, and the facility, areas presenting a gas hazard should be monitored by gas detectors. Commercial buildings that share a warehouse with manufacturing and/or service work in the back and offices in the front are a prime place for harmful gases and vapours ...

  • Noise at Work, Workplace Noise and Issues with Noise

    Noise at Work Regulations to Control Workplace Noise The Control of Noise at Work Regulations (2005) became effective in 2006.  The Regulations are relevant to all employers who operate a noisy workplace and should be an integral part of any health and safety strategy.  ...


    By Pulsar Instruments plc

  • How to Deal with Asbestos Exposure in Your Workplace: Advice for Managers

    Industrial mangers are faced with hundreds of responsibilities each day. Ensuring worker safety should be at the top of their priority list – especially when it comes to asbestos. Do you work in management at a construction site or industrial occupation? Here’s what you can do to promote asbestos safety: Conduct ...


    By Intelex Technologies Inc.

  • An ambient indoor air environment is vital to ensure a safe and healthy workplace

    Indoor air quality (IAQ) relates to a number of environmental factors inside a building that can impinge on the health, comfort, or work performance of the building’s occupants. Monitoring IAQ is vital because it is estimated that the average person spends 90% of their time breathing “indoor air”. Poor IAQ is a contributing factor to both short and long-term health issues, these ...


    By PPM Technology

  • Mitigation of workplace radon gas concentration using high–performance epoxy resin coating

    The indoor radon gas released from concrete was measured using a 0.65 × 0.65 × 0.65 m fabricated concrete slab room, simulating a workplace. The indoor radon gas concentration was monitored, and the remediation method was examined. Radon concentrations were monitored using Radon Monitor Model 1023 from Sun Nuclear. Results show that average radon concentrations reached 111 ...


    By Inderscience Publishers

  • UK Report Assesses Workplace Exposure and Control Measures During the Manufacture and Handling of Engineered Nanomaterials

     The United Kingdom’s Health and Safety Laboratory (HSL) of the Health and Safety Executive (HSE) prepared a report entitled Summary of work undertaken to assess workplace exposure and control measures during the manufacture and handling of engineered nanomaterials.  The report notes that HSE and HSL attempted to identify and ...


    By Bergeson & Campbell, P.C.

  • Accurate detection and monitoring of formaldehyde

    The article discusses the importance of monitoring Formaldehyde in many workplaces and public buildings. And how recent technological developments by PPM Technology provides a simple soultion to this ...


    By PPM Technology

  • Radiation Monitors and Meters

    Light Description and Applications The light meter is a portable unit designed to measure visible, UV, and near-UV light in the workplace. (The CTC has a UV light meter available through its loan program, ALEP.) The light meter is capable of reading any optical unit of energy or power level if the appropriate detector has been calibrated with the meter. The spectral range of the instrument is ...

  • Wireless monitoring for a safe indoor environment

    This article discusses the benefits of wireless technology for continously monitoring the indoor environment. In striving for the construction of energy efficient and cost-effective buildings, the imperative issue of the buildings Indoor Air Quality (IAQ) is often overlooked. This can often lead to a unhealthy indoor environment and even to conditions such as Sick Building Syndrome (SBS) or other ...


    By PPM Technology

  • FTIR gas monitor for diverse applications

    QUANTITECH, a leading supplier of environmental monitoring instrumentation, has recently supplied EURO Environmental Services in Ireland with a transportable Gasmet FTIR multiparameter gas analyser which EURO Environmental's Managing Director Geoff Fitzpatrick says, “is proving invaluable in many varied applications across a broad selection of industries.” With headquarters in Drogheda in Ireland ...


    By Quantitech Ltd

  • Smart Monitoring Solutions for a Hassle Free Project

    Geotechnical monitoring is very much responsible for the successful completion of any project. This monitoring is done with the help of the geotechnical systems. There are different companies that provide the customized solutions for the geotechnical monitoring. Such solutions include comprehensive programming like designing the systems, installation and delivering on the site, access of the data ...


    By Soldata Limited

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you