workplace monitoring instrument Articles

  • Simultaneous determination of PM fractions, particle number and particle size distribution in high time resolution applying one and the same optical measurement technique

    Abstract The Fidas fine dust monitoring systems comprise an optical aerosol spectrometer, which is characterized by very good instrument characteristics, and utilize a sophisticated approach to convert the measured information on particle number and particle size into mass concentrations. As monitoring of PM requires reliable and quality-controlled performance of the measuring systems, ...


    By Palas GmbH

  • Heat Stress In The Workplace

    Heta stress monitoring, why you should monitor, effects of heat stress and how to combat it in the workplace. Why should you measure heat stress? If you or your employees work in hot environments you may be susceptible to heat stress. Heat stress us caused when the temperature of a surround area or the core body temperature is raised resulting in dangerous high levels. ...


    By Shawcity Limited

  • In-depth workplace noise risk assessments

    Don’t miss a thing with a custom-made noise measurement kit Pulsar Safety Professional System: the-all-in one solution to noise measurement Pulsar Instruments’ Safety Professional noise measurement system offer Safety, Health, Environmental and Quality (SHEQ) experts a custom-made solution for resolving their complex workplace noise risk ...


    By Pulsar Instruments plc

  • Noise at Work, Workplace Noise and Issues with Noise

    Noise at Work Regulations to Control Workplace Noise The Control of Noise at Work Regulations (2005) became effective in 2006.  The Regulations are relevant to all employers who operate a noisy workplace and should be an integral part of any health and safety strategy.  ...


    By Pulsar Instruments plc

  • Manage the rise in deafness claims with Pulsar Instruments

    The recent reports in the press about insurance groups complaining of a sharp rise in claims from employees seeking compensation for hearing problems have highlighted the real risks of noise induced hearing loss and the importance of protecting employees in the workplace. Although employees are protected by Law, noise induced hearing loss is often ignored. And once hearing loss has occurred, it ...


    By Pulsar Instruments plc

  • Why instrument hire makes occupational safety sense

    Background Decisions concerning the acquisition of occupational safety monitoring instrumentation are often made by operational staff that may not have visibility of the full financial implications of their choices. The following article will examine the factors affecting these decisions and explain why a strategic decision to hire instrumentation can deliver substantial and wide-ranging ...


    By Ashtead Technology Ltd

  • Radiation Monitors and Meters

    Light Description and Applications The light meter is a portable unit designed to measure visible, UV, and near-UV light in the workplace. (The CTC has a UV light meter available through its loan program, ALEP.) The light meter is capable of reading any optical unit of energy or power level if the appropriate detector has been calibrated with the meter. The spectral range of the instrument is ...

  • FTIR gas monitor for diverse applications

    QUANTITECH, a leading supplier of environmental monitoring instrumentation, has recently supplied EURO Environmental Services in Ireland with a transportable Gasmet FTIR multiparameter gas analyser which EURO Environmental's Managing Director Geoff Fitzpatrick says, “is proving invaluable in many varied applications across a broad selection of industries.” With headquarters in Drogheda in Ireland ...


    By Quantitech Ltd

  • WHO report on diesel fumes puts sharp focus on need for effective monitoring

    The World Health Organisation this month reclassified the dangers of diesel exhaust fumes, upgrading the risk from probably carcinogenic to a definite cause of cancer. The WHO report is based on the findings of research on workers in high risk areas, and puts a sharp focus on the need for effective monitoring in industries such as mining, rail, transportation, construction, power generation and ...


    By Shawcity Limited

  • Increased Demand for PureAire’s Oxygen Monitor for Nitrogen and Helium Storage

    When storing or using Liquid Nitrogen, Helium, CO2, or Argon cylinders in a confined space, what are the potential risks? Gas leaks are the most common, requiring the need for an oxygen deficiency monitor for protecting employees in the workplace.  With inert cryogenic gases, loose or broken fittings can leak gas into a room displacing oxygen, causing impaired judgment or loss of life to ...

  • Noise Pole Power Station Noise case study

    Equipment Summary Invictus Environmental Noise Pole Noise-Hub Noise Management Software Before the Cirrus System was installed we could never investigate noise complaints properly ...


    By Cirrus Environmental

  • CR:243/4 noise pole – industrial power station case study

    “Before the Cirrus System was installed we could never investigate noise complaints properly because the data from the time of the complaint was not available in retrospect. We needed noise monitoring instruments that would store data continuously, with software to interrogate the monitors and download data, to give us a complete history of the noise levels at our boundaries. We have ...


    By Cirrus Environmental

  • Keeping Healthcare/SPD Workers Safe from Exposure: 2 Very Different Options

    Continuous Monitoring vs. Badges Badges are designed to provide the Time Weighted Average (TWA) data for the total exposure period. They contain an absorption medium that reacts with or absorbs and holds the target chemical from the air to be analyzed later, which indicates the exposure after the fact. Badges, sample tubes, and wet chemical methods were the predominant technologies for monitoring ...


    By ChemDAQ, Inc.

  • Case study - Geotech`s G100 verifies CO2 in NHS incubators

    About the customer Stockton Quality Control Laboratory, University Hospital of North Tees, England The lab provides microbiological, chemical, environmental and medical gas testing services Challenges the customer faced Before they had Geotech’s G100 CO2 incubator analyser, Stockton QC used a CO2 analyser with a collection of separate instruments for ...


    By Geotech

  • Pulsar Top Tips to Safeguard Employees’ Hearing from Noise - Are you following the guidelines?

    Your employees' hearing is worth protecting According to the HSE, over a million of workers in the UK are exposed to levels of noise at work which put their hearing at risk. If asked, would you be able to prove that you are following the guidelines? Here is a useful reminder produced by Pulsar covering the main employers' responsibilities towards the ...


    By Pulsar Instruments plc

  • What is Intrinsic safety and ATEX?

    What is intrinsic safety? Intrinsic safety (IS) is a low energy signalling technique that ensures the safe operation of electrical equipment in hazardous areas by limiting the energy – both electrical and thermal – available for ignition. ...


    By Hansford Sensors

  • Fixed multi-parameter gas detection system can ensure industrial facilities are safe from hazardous or toxic gases

    Industrial workplaces are likely to come across one or more hazardous or toxic gases. Combustible gases such as methane are highly dangerous because they can cause large and fatal explosions when ignited. Other problem areas when working in industry are carbon monoxide (which poisons the cardiovascular system), oxygen deficiency, and elevated levels of other gases and pollutants, depending and ...


    By PPM Technology

  • NIOSH Announces Sampling Strategy to Help Identify Potential Nanomaterial Exposure in an Occupational Setting

    On November 1, 2016, the National Institute for Occupational Safety and Health (NIOSH) published a blog item entitled “Never fear!  NEAT 2.0 is here! — How to perform nanomaterial exposure assessment in the workplace.”  NIOSH notes that in 2009, it developed and was the first to recommend using the nanoparticle ...


    By Bergeson & Campbell, P.C.

  • TVOC measurement for LEED/green building evaluation

    Total Volatile Organic Compounds (TVOC) may be evaluated when building designers/managers are pursuing the Leadership in Energy and Environmental Design Green Building Rating System for New Construction (LEED-NC) EQ Credit 3.2. The latest LEED-NC guidance document specifies that the maximum allowed concentration of TVOC measured in a building (post construction, pre-occupancy) is 500 µg/m3; the ...


  • Don’t Turn a Deaf Ear to a Noisy Working Environment

    Whether you work in manufacturing, engineering, construction, or in an office environment, the incessant noises of machinery or even noisy work colleagues can have an effect on your wellbeing after a while. But the problems associated with noise run much, much deeper than this. It can lead to severe and permanent loss of hearing, as well as a significant rise in blood pressure and stress. And the ...


    By Pulsar Instruments plc

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you