zero-liquid discharge system Articles

  • What Is Zero Liquid Discharge and How Does It Work?

    Not every industrial facility that produces wastewater will require zero liquid discharge (ZLD). It is usually looked to as a last resort because it can be a complex process that requires a high initial investment. If a facility is located on a site that has severe water scarcity issues and/or astronomical discharge fees, it might be ...


    By SAMCO Technologies, Inc.

  • Case Study - Zero Liquid Discharge (ZLD) Application

    Applied Water Solutions was contacted by a client who planned to move their manufacturing facility to an area where there is strict limitations on water discharge. Working close with the client we created a process flow diagram (PFD) using multiple water purification technologies that provided pure water generation, water recycling capabilities and offsite disposal of solids. From the PFD we then ...

  • How much will a zero liquid discharge system cost your facility?

    With increasing stewardship of environmental protection, both nationally and internationally, many industrial facilities and effluent regulators are strengthening strategies to reduce industrial process waste by implementing zero liquid discharge (ZLD), a process that limits liquid waste at the end of your industrial process to—as the term suggests—zero. A ...


    By SAMCO Technologies, Inc.

  • Distillation Process Can Yield Zero Liquid Discharge System

    Many industrial applications produce liquid waste as a by-product of their process. As environmental regulations governing the disposal of industrial wastewater become more stringent, it's imperative that innovative wastewater treatment solutions are used to treat this waste and minimize the environmental impact of disposal. While numerous technologies exist to treat industrial wastewater, Zero ...


    By Samsco Corporation

  • What are the best companies for Zero Liquid Discharge Equipment and Technology?

    With an increasing push for environmental protection, many industrial facilities and effluent regulators are making decisions that lessen their impact on the environment and human health. Changes and implementations are constantly being discussed and met both nationally and internationally to change the way industrial facilities discharge waste, and it is important to know which companies are the ...


    By SAMCO Technologies, Inc.

  • Ten top tips to achieve zero liquid discharge production

    Sustainability is the hot topic of our time. In a world of dwindling natural resources, taking environmental responsibility is absolutely essential. That’s why it is up to companies to take responsibility for operating in a sustainable manner. Modern wastewater processing systems allow industrial companies to re-use their treated wastewater in production. Read the top ten tips for the ...


    By H2O GmbH

  • Five common problems with zero liquid discharge and how to solve them

    As more and more facilities are turning to zero liquid discharge (ZLD) for wastewater treatment and effluent reduction—whether it’s to comply with local discharge regulations or recycle and reuse as much water as possible in your process—more information is becoming available about the possible issues your facility might face while using ZLD technology. Because of the scope of ...


    By SAMCO Technologies, Inc.

  • Antibiotic Production Wastewater Zero Liquid Discharge Of Disc Tube SUPER RO

    Project address: Inner Mongolia in China Inflow:6300 ton per day(the largest antibiotic wastewater zero discharge project in Asia) Acceptance time:1,2015 Process: UF+RO+SUPER RO+ ...


  • Does your facility need Zero Liquid Discharge Technology?

    If your industrial facility discharges its waste into deep wells, streams, sewers to publicly owned treatment works (POTWs), and/or other waterways, it is likely there are some types of regulations on discharging the waste. With an increasing push toward environmental protection, many industrial facilities and effluent regulators are strengthening strategies to reduce industrial process waste. ...


    By SAMCO Technologies, Inc.

  • Corrugated Printing Facility Zero Discharge

    This company imports corrugated board and prints the labels using a flexographic machine. The facility had a wastewater treatment system using the traditional liquid chemistry of aluminum chloride, caustic for pH adjustment, and an anionic flocculant. The effluent was often out of compliance due copper from the color pigments in the inks. The system required continual adjustment of the 3 ...


    By Integrated Engineers Inc.

  • Canadian mill achieves zero effluent discharge

    The zero effluent goal required the highest quality aerators Problem When designing its new mill and wastewater treatment system in 1992, this Canadian Company had planned to discharge into a nearby creek. But, sensitive to the region’s pristine environment, they decided to design the most advanced effluent treatment system conceivable: a chlorine-free, closed loop, zero effluent ...

  • Zero-Discharge Treatment System for the Wastewater from Scenic Environmental Sensive Communities

    The “Zero-Discharge” Wastewater Treatment System has been advocated for the scenic and/or historically preserving tourism spots.  The Decentralized Wastewater Treatment (DWT) coupled with the Land Treatment Method has been found to be the most effective treatment system to achieve such historically unachievable “Zero-Discharge” dream. The DWT, normally also referred ...


    By IWA Publishing

  • Zero discharge system handles german power station’s fgd wastewater

    Evaporator/Crystallizer Combined with Salt Exchange Pretreatment is the Answer for this Demonstration Plant. The Facility A major European utility has several power block units fitted with wet limestone FGD scrubbers at their 600 MW power station in southern Germany. The blowdown from the scrubbers is treated to remove the heavy metals and suspended solids. The ...

  • Ground Zero for Industrial Parts Cleaning Discharge - Case Study

    PROCECO helps the R.H. Sheppard Co. attain zero waste after parts cleaning. RH Sheppard purchased a PROCECO Eco-Smart MVR (Mechanical Vapor Recompression) evaporator with a goal of doubling their wastewater processing capabilities. Their new system replaces an obsolete and energy-consuming evaporator. The PROCECO Eco-Smart uses a low-energy distillation method that generates a ...


    By Proceco Ltd.

  • MPT CASE STUDY: Accomplishing Zero Discharge at a Major Gravure Printing Facility

    The Opportunity The gravure printing industry comprises primarily of three business sectors; publications, packaging and product printing. The ...


  • Zero Waste System in Paradise

    Most visitors to Fiji come for rest and relaxation on the white sand beaches or for diving and snorkeling among the unspoiled coral reefs. Few visitors realize that this tropical island in the South Pacific, north of New Zealand, is on the cutting edge of industrial ecology with a fully functional, zero waste program located near the Fijian capital of Suva. As part of an EPA funded review of ...


    By BioCycle Magazine

  • Impact of carwash discharge on stormwater quality (Toulouse, France)

    The contribution of discharge from carwashes to pollutant levels in stormwater was evaluated. Five carwashes and two outlets in the city of Toulouse (France) were selected. Water samples were collected from December 2006 to December 2007. Concentrations and loadings of classical water quality parameters (conductivity, pH, turbidity, chemical oxygen demand, nitrogen, phosphorus, ammonium, nitrate, ...


    By IWA Publishing

  • Reuse of California brine olive oil processing wastewater to meet zero discharge goal

    Abstract Reuse of low strength municipal wastewater is becoming quite common and many technologies are available for that purpose. However, treatment and reuse/recycling of high strength industrial wastewater is still a challenge. In this paper we present some case studies with implemented integrated systems to achieve zero discharge goal. We will concentrate on the description ...

  • Control of dangerous substances in discharges and microbiological abatement: European framework and a case study of an ozone disinfection system

    Directive 2000/60/EC requires the achievement of a ‘good chemical status’ for surface water within pre-established dates. Disinfection is needed to achieve compulsory final microbial limit values (in Italy for wastewater discharges the parameter Escherichia coli – EC – is imposed by law with a maximum limit value of 5,000 cfu/100 mL). Liquid waste and disinfection ...


    By IWA Publishing

  • Industrial wastewater - who discharges what and who pays for the cleanup?

    Canada's renewable water supplies are being threatened by vast amounts of municipal and industrial waste being disposed of in rivers, lakes and other marine areas. Those industries largely responsible are not paying their share for the clean up according to Statistics Canada. The Industrial wastewater business is huge involving water costs of $1.7 billion and water treatment costs of $656 million ...


    By GLOBE SERIES

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you