zero vibration Articles

  • Vibrating feeders for stockpiling and reclaim

    The expanding applications of vibratory feeders for controlling the flow of bulk materials, and their adaptation for processing requirements, have developed considerable interest in stockpiling and reclaim systems. The general design of these units consists of a material transporting trough, or platform, driven by a vibratory force system. The flexibility and variety of designs is limited only by ...


    By General Kinematics

  • Predicting noise, vibration and harshness performance degradation through fatigue analysis

    Vehicle performance from a noise, vibration and harshness (NVH) perspective is typically evaluated at zero mileage. As the vehicle accumulates miles, systems that are considered as NVH sources and systems that are part of a noise and vibration path tend to see some degradation due to loosened joints, burnished gears, burnished bearings, etc. Up to date, efforts made to understand and predict NVH ...


    By Inderscience Publishers

  • Performance of damage detection algorithms for health monitoring of joints in steel frame structures using vibration–based techniques

    Steel frame structures are widely used for industrial buildings, bridges, off–shore structures, etc., due to their high reliability and less construction time. In these types of structures, beams and columns are often connected by welding or fasteners forming rigid joints. In this study, viability of several damage detection algorithms for health monitoring of joints in planar frame structures ...


    By Inderscience Publishers

  • Application of surface complexation models to anion adsorption by natural materials

    Various chemical models of ion adsorption will be presented and discussed. Chemical models, such as surface complexation models, provide a molecular description of anion adsorption reactions using an equilibrium approach. Two such models, the constant capacitance model and the triple layer model will be described. Characteristics common to all the surface complexation models are equilibrium ...


    By John Wiley & Sons, Ltd.

  • VSEP takes reverse osmosis where it has never been before, further concentrating RO reject (brine) streams to increase overally recovery to 99%.

    Conventional spiral wound membrane systems using reverse osmosis or nano-filtration membranes are increasingly being used to treat well water from underground sources to supplement local drinking water supplies. Many of the remaining underground water sources are 'Brackish' water sources where the dissolved solids can be 5,000 mg/L or even higher. One of the difficult engineering aspects of ...


    By New Logic Research, Inc.

  • The advantage of CNC Centerless Internal Grinding Machine

    The CNC series centerless grinding machines can be used for infeed grinding and thrufeed grinding to ensure accuracy, high productivity in workpieces Automatic loading and unloading attachment is convenient to operate and reduce cost. The main advantage are as follows: 1.The grinding and regulating wheel spindles are made of high quality alloy steel ...


  • New developments of vibratory feeders for large bulk material reclaim systems

    Summary The efficient economical storage, movement, control and blending of large tonnages at coal handling installations such as mines, power plants and port facilities require new and improved designs of vibratory equipment. Environmental and investment impact as well as operational advantages must be considered in the development of any new reclaim system. ...


    By General Kinematics

  • Predicting Bearing Failures and Measuring Lubrication Film Thickness in Your Plants Rotating Equipment

    ABSTRACTTypically there are two options of maintenance concerning bearings, one is to lubricate them the other is to change them. Monitoring bearing condition is critical to insure reliability. The equipment in water and wastewater plants is an asset that must be managed and prolonging its life will insure a positive contribution to your plants operating efficiency. By incorporating a ...

  • Nanostructured superconductors: from granular through wire towards high-Tc nanotubular 2D composites

    Superconductivity in nanostructured materials, nanowires, nanotubes and their 2D crystals is briefly reviewed. Experimental data show both the decrease of a critical superconducting temperature Tc under transition from polycrystalline to nanogranular ceramics, and the increase of Tc under transition to one-dimensional (1D) nanowires, nanotubes and their 2D ...


    By Inderscience Publishers

  • Noise, sound, decibels, hearing

    A decibel–a measure of sound. Like all short answers, this one leaves out a lot. When we hear a sound, its because our brain has received a nerve impulse from the nerve cells in the Inner Ear, which consist of a bone, called the Cochlea because it resembles a snail shell. These cells have long “hairs” that project into fluid inside the cochlea. There is a hole in the cochlea ...

  • Controlling Stack Emissions in the Wood Products Industry

    Electrostatic precipitation has been a reliable technology since the early 1900's. Originally developed to abate serious smoke nuisances, the manufacturers of zinc, copper, and lead quickly found electric gas cleaning a cost efficient way to recover valuable product carried out of the stacks from furnace operations. Today electrostatic precipitators are found mainly on large power plants, cement ...


  • GKN aerospace success with portable impedance meter

    The GKN site in Cowes, Isle of Wight, UK, has long experience in the design and manufacture of passive sound insulation systems for air-intakes and by-pass ducts of aircraft engine nacelles. Dr. Armando Vavalle, Technology Development Engineer from GKN reports here on impedance tests conducted with Brüel &Kjær’s Portable Impedance Meter Type 9737 for the development of such ...

  • Heat Pumps – FAQs

    1. What is a Heat Pump? To put it simply; ground source heat pumps and geothermal heat pumps produce high grade heat from low grade heat which is found in the earth and our atmosphere.2. How does a Heat Pump Work?Heat pumps work in exactly the same way as air conditioners or refrigerators, but in reverse! Heat pumps capture latent energy which is stored in sources such as air, water and earth. ...


    By ICS Cool Energy Ltd.

  • Coal fired power plant achieves ZLD for FGD wastewater

    The Facility Illinois’ City of Springfield’s Dallman Power Station’s three coal-fired units and soon to be installed fourth unit, are equipped with flue gas desulfurization (FGD) systems (scrubbers) to control sulfur dioxide (SO2) emissions. The Problem A sharp increase in boron concentration in the FGD wastewater required that The City ...

  • Abha water utility comes out on top with automated control valves

    Abha is a small modern city in the fertile mountains of southwestern SAUDI ARABIA. Its cool summers make it a popular destination for tourists, but in general the population hovers around 250,000. The city has a new reservoir on top of a hill that releases water through 6 km of piping down to its main Noaman reservoir. The top tank is 100 meters higher than the lower tank. This makes for a great ...


    By Singer Valve Inc.

  • South Australia’s $403 million NSISP Uses a “Super” Valve to Perform in a Variety of Extreme Conditions

    NSISP is one of South Australian Water Corporation’s (SA Water) biggest infrastructure projects undertaken in Adelaide metropolitan to connect the north and south drinking water distribution systems and to increase access to their desalination plant. The project included the construction of 32 km of pipeline through metropolitan main roads and suburban inner streets. This is no small feat ...


    By Singer Valve Inc.

  • Bed Level Measurement

    Numerous studies and papers have been devoted to the subject of thickener design and operation to achieve specified throughput and discharge densities. Mathematical models have been developed that present methods for sizing thickeners and predicting performance under varying process conditions. The compression effect of deeper beds on dewatering performance is a recognized phenomenon. This is one ...


    By WesTech Engineering, Inc.

  • Typical process weighing applications

    Process weighing relates to the weighing of a powder material as part of a production process. The technology includes continually monitoring a material in a silo, discharging material by weight or rate, or even weighing products on the move. This article gives an overview of most of the typical process weighing applications that are used in all sorts of industries: level or inventory measuring ...


    By Hardy Process Solutions

  • Paste thickener bed level measurement

    Numerous studies and papers have been devoted to the subject of thickener design and operation to achieve specified throughput and discharge densities. Mathematical models have been developed that present methods for sizing thickeners and predicting performance under varying process conditions. The compression effect of deeper beds on dewatering performance is a recognized phenomenon. This is one ...


    By WesTech Engineering, Inc.

  • Introduction to the BioCar Nature Based Transportation Systems

    The people of the world are rapidly growing aware of the full impact of current transport systems upon their safety, economy, health and environment. This has not been lost on the major auto companies who have spent millions of man-hours and billions of dollars over the last decade in pursuit of the Next Generation Vehicle. But they have little to show for their efforts having been increasingly ...


Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you