Meat processing factory - Case Study


Courtesy of Courtesy of AMCON Inc.

Installation in a narrow space


This factory had used multi disc type dewatering equipment for long time; however, they had been facing problems such as aging and lack of throughput of the equipment.

Due to a limited space for the dewatering equipment, they were looking for compact dewatering equipment with larger capacity.

AMCON's offer for a solution

AMCON offered Sludge Dewatering Press Volute ES-303 model which can handle 12.8 m3/hr. as maximum for this sludge concentration at 7,000 mg/L. In case the existing building is too small to install this large scale equipment, large-scale construction work could be necessary such as re-construction of a new building or breakings down of the entrance. AMCON’s Sludge Dewatering Press Volute can be divided into the Flocculation Tank part and the Screw part, which enabled transportation and installation through the existing narrow entrance. Water content resulted in better than the previous value at 85%. Customer’s comment: “It is helpful to be able to confirm flocculation and filtrate condition at sight.”

Customer comments

No comments were found for Meat processing factory - Case Study. Be the first to comment!