Integrated Engineers Inc.

Mexican Textile Dyeing Wastewater Case Study #1


Courtesy of Courtesy of Integrated Engineers Inc.

Increase Capacity, Increase Compliance, Increase Profits *

This facility dyes material and this is a sample of their dye wastewater.

The pH was 9.73 and Floccin 909 was used at a dosage of 1 grams/1,000 ml (8.34 lbs or 1 kg/ton of water).

The treated pH was 9.3.

The water was then filtered to simulate a settling or liquid/solids separation step.

The untreated suspended solids was measured at 1,130 ppm and the treated suspended solids were 9 ppm.

Customer comments

No comments were found for Mexican Textile Dyeing Wastewater Case Study #1. Be the first to comment!