Mexican Textile Dyeing Wastewater Case Study #2

0

Courtesy of Integrated Engineers Inc.

Increase Capacity, Increase Compliance, Increase Profits *

This facility dyes material and this is a sample of their dye wastewater.

The pH was 7.27 and Floccin JP+ was used at a dosage of 0.5 grams/1,000 ml (4.17 lbs or 0.5 kg/ton of water).

The treated pH was 9.15.

The water was then filtered to simulate a settling or liquid/solids separation step.

The untreated suspended solids was measured at 285 ppm and the treated suspended solids were 25 ppm.

Customer comments

No comments were found for Mexican Textile Dyeing Wastewater Case Study #2. Be the first to comment!