chipping Articles
-
Application of Lab-on-a-chip Technology in Water Analysis
The Important of Water Analysis Water analysis is essential to ensure its quality or to detect pollutants that should be removed by water treatment. However, water quality does not mean making the water suitable for human consumption; it depends on its end use. For example, completely different quality standards are applied in case of industrial water compared to those applied to drinking ...
By Chemyx Inc
-
Concentrations of organic wood preservatives in wood chips produced from wood wastes
We investigated the concentrations of wood preservatives in the wood chips produced in wood-waste processing facilities in 1988, 1998–1999, and 2001–2002. Among the wood preservatives used in the past in Japan, halophenols, including PCP, chlordane, and chlorpyrifos, had comparatively high detection rates and high average concentrations in the wood chips produced in 2001–2002. Aldrin and endrin ...
-
Imaging and analysis of chip formation during orthogonal cutting of titanium alloy
Orthogonal cutting of titanium alloy Ti-6Al-4V was investigated in a series of continuous and interrupted turning tests. Direct observation of the chip formation zone was achieved using a high speed imaging system with a long-distance microscope lens. Frame rates from 20,000 to 50,000 frames per second were used to record the chip formation cycle over a range cutting speeds from 4 to 150 m/min ...
-
Raw material cycle: from chip to briquette to product - Case Study
Thanks to their briquetting system from RUF Frischhut can redeploy production scrap and melt it again Ludwig Frischhut GmbH and Co. KG have closed the circle on their raw material cycle by utilising a briquetting press from RUF: cast chips produced during the machining of parts for water supply and sewage disposal are pressed to solid briquettes and then melted in the in-house foundry and cast ...
-
Analyzing the Economic Benefits of Charcoal Production from Waste Wood Chips
In today's quest for sustainable solutions, the conversion of waste wood chips into charcoal has emerged as a promising avenue for economic growth and environmental stewardship. This article delves into a comprehensive analysis of the economic benefits associated with charcoal production from waste wood chips, highlighting the pivotal role of wood to charcoal machines in unlocking value from ...
-
Moisture measurement of wood chips with M-Sens - Case Study
Customer: Biogas plant Product: Wood chips Moisture range: 20 – 60 % Installation: After the shredding machine Function: Measuring the moisture of wood chips APPLICATION In a biomass power plant, the combustion of biomass generates electricity and heat. The operator of a biofuel plant was looking for a solution that would provide him with information on the moisture content of the biomass ...
By ENVEA
-
C&A tool increases profitability, maintains clean facility with chip processing system
Challenge A machining supplier needs an automated chip and fluid processing system to process metal turning and chips, while simultaneously capturing expensive cutting fluids for reuse. Customer C&A Tool Engineering, Inc. Industry Machining Products Vertical Axis Crusher Diagonal-Shaft Wringer Steel Belt Conveyor Screw Conveyor Tramp Metal Separator Business Benefits Realized Recovery ...
By PRAB, Inc
-
Briquetting – for more efficiency
Normal 0 21 false false false DE X-NONE X-NONE ...
-
Laboratory study on factors influencing nitrogen removal in marble chip biofilters incorporating nitritation and anammox
It remains challenging to integrate nitritation and anammox in ecologically engineered treatment systems such as passive biofilters that are packed with natural materials and have low energy inputs. This study explored the factors influencing nitritation-anammox through parallel operation of two laboratory-scale biofilters packed with large and small marble chips respectively. Clean marble chips ...
-
Validation of a fully autonomous phosphate analyser based on a microfluidic lab-on-a-chip
This work describes the design of a phosphate analyser that utilises a microfluidic lab-on-a-chip. The analyser contains all the required chemical storage, pumping and electronic components to carry out a complete phosphate assay. The system is self-calibrating and self-cleaning, thus capable of long-term operation. This was proven by a bench top calibration of the analyser using standard ...
-
A new bisphenol a derivative for estrogen receptor binding studies with surface plasmon resonance
A new bisphenol A (BPA) derivative was synthesized and was immobilized onto the surface of a CM5 sensor chip for the binding study with orphan estrogen‐related receptor (ERRγ) using the surface plasmon resonance (SPR) technique. The kinetic parameters including dissociation and association constants, and, dissociation and association rate constants were investigated. Moreover, a competitive ...
-
Oil skimmers, inc. helps a Growing snack food manufacturer reduce wastewater treatment costs and Go Green in the process - Case study
A privately held snack-food manufacturer in the Midwest expected to increase production of potato chips by 20%, to about 72 million pounds a year. While more potato chips would mean more profits, it also would mean more oil-laden wastewater from washing the potatoes and the fryers used to cook ...
-
Aluminium chips double their value in briquette form
Normal 0 21 false false false DE X-NONE X-NONE ...
-
Moisture measurement with M-Sens 2 - Case Study
Application A manufacturer of wood pellets processes raw material such as planing chips or wood chips (wood waste) to make wood pellets. After delivery of the wood waste, it is cleaned from extraneous material like metal and stones by a separator. Afterwards the material is crushed by a hammer mill and then dried. The crushed material is then transported by a conveyor belt through a 90 °C ...
By ENVEA
-
Differences in wood crushers
A grinder is a piece of equipment that is often used at work to crush wood and other materials. There are many types of grinders, and therefore their functions vary. When using a shredder, some people may not be clear about the difference between a wood shredder and a sawdust shredder. Now, let’s take a look at the differences between these devices.Wood crusher is the general term for the field ...
-
Flexibility with biomass size reduction
With increased global demand for biomass as a renewable energy source, engaging in profi table and effi cient biomass handling has become priority No. 1 for processing plants worldwide. The equipment used to carry out the strict production requirements of chipping, grinding, shredding and conveying the wood chips is vital to the design and tonnage estimations of engineers. Choosing the right ...
-
Evaluation of passive reduction of nitrate from greenhouse effluent by planted bioreactors
A number of pilot-scale gravel and wood-chip hybrid bioreactors planted with select species, together with unplanted units, were evaluated for their nutrient removal capabilities from the typical greenhouse effluent with high levels of nitrate and salts. Two levels of nutrient solution (high and low loading: HL/LL) were prepared to simulate the typical characteristics of the greenhouse ...
-
The Difference between 3014 Patches and 3528/5050/3020 Patches
Boundary dimension3014: The component is 3.0mm long and 1.4mm wide. Power: 0.1w 9-13lm one or two LM one. Working voltage: 3.0-3.4 3528: Component length 3.5mm, width 2.8mm. Power: 0.06W 6-9lm a LM a gear. Working voltage: 3.0-3.4 5050: Component length and width are 5mm. Power: 0.2w 17-27lm two or three LM one gear. Working voltage: 3.0-3.4 The sizes are different, so the power is not the same, ...
-
Selected examples in nano–sciences and nano–technologies at FEMTO–ST
This paper contributes selected examples based on the research and development of sub–micrometric and nanoscale structures at FEMTO–ST. In particular, exploitation of bandgap materials such as lithium niobate is a specialty of the institute and is applied in active photonic and phononic devices. Another area of active research concerns instrumentation at the microscale and nanoscale. More ...
-
Michigan logger builds new chip fleet with Titan Trailers
With successful operations already running in excavation and logging, Jim Carey was in no hurry to add new chip trailers to the fleet for his growing biomass business. He took his time to decide where he could expect to get the best return on his latest investments. “When we got into the chipping business four years ago, we bought reconditioned multi-axle trailers to get started. We had ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you