Browse all Channels
  4. Protecting Remote Monitoring Sites from Lightning Damage

Protecting Remote Monitoring Sites from Lightning Damage

0
- By:

Courtesy of Stevens Water Monitoring Systems, Inc.

Protecting monitoring sites from lightning damage is an important consideration for equipment and stations that are deployed in areas that are prone to lightning strikes.

Lightning that does not directly strike a site may still cause damage by traveling through the ground and into buried sensors or cable. Proper planning for such events can help reduce the risk of lost data or expensive equipment replacement and site downtime.

Continue reading to find out several ways to help protect your systems from potentially damaging and costly lightning strikes.

Related articles

  • 3D Offshore Imaging for Seawater Intake for Desalination Plants - Case Study

    AGI’s Multi-Electrode Switch Box is an accessory to the SuperSting Wi-Fi. It allows the SuperSting Wi-Fi to automatically control and switch passive electrodes connected by a passive multi-electrode cable for automatic data acquisition in 2D, 3D, and 4D surveys. The rugged and sealed design makes it ideal for harsh environments like sub-surface, marine and borehole measurements, and long-term monitoring systems. The Multi-Electrode switch box is also available with banana socket connector for each electrode...

  • Determining the Right Cable Length and Output for a Sensor

    If you’re monitoring a bridge or automating a machine, a high precision sensor is a great solution, but it’s no good if the output signal can’t reach the data logger. Depending on what you need to measure and what environment you’re in, determining how long your cable must run can be crucial. High precision sensors offer three common output types: analog, digital and current and each one can serve a certain purpose based on your application Capabilities of Voltage Output Analog output...

  • Case study - Water quality monitoring and weather data at Pampulha Lake-Brasil

    In 2010, OTT Hydromet`s partner in Brasil, Hexis began working with CETEC. This resulted in the installation of a buoy, equipped with an automatic profiling system, in early 2013. The project’s objective is the continuous monitoring of the lake’s water quality, with focus on improving this by the 2014 World Cup Games. Adcon, Lufft and OTT technologies (Hydrolab DS5X multi-parameter probe and OTT DuoSens datalogger) are used in conjunction with one another to record the water quality data. Background...

  • Case study - Monitoring underground water resources in Brazil

    Monitoring underground water resources in BrazilThe Coca-Cola FENSA plant in Mogi das Cruzes is responsible for bottling mineral water supplied from two ground water sources. The plant is a benchmark for environmental sustainability projects. With this pioneer project the Mogi das Cruzes plant was the first of the Coca-Cola FENSA Group to install an online analysis monitoring, using the OTT PLS and OTT DuoSens datalogger, along with other Hach technologies. Monitoring Solution The monitoring system consists of...

  • Case study - Dam monitoring in South Africa

    The purpose of the Komati River Basin Development Project is to ensure the availability of water in order to promote economic development in the region. OTT’s part of the project was to supply dataloggers for the monitoring of the river flows into and out of the Maguga and the Driekoppies dams.The technical needs were high-level: Technology designed specifically for environmental monitoring applications Robust in construction for long-term deployment Long-life internal power source Small installation...

Customer comments

No comments were found for Protecting Remote Monitoring Sites from Lightning Damage. Be the first to comment!