STOP IT® Case Histories - Building Maintenace

0

Courtesy of InduMar Products, Inc.

Remember - Call Before Digging:
A county school district in Florida used STOP IT® to repair copper and PVC water lines with diameters of 2' and 2½' respectivelly and operating pressures of 80psi. They also used STOP IT® to repair a 3' diameter PVC line that carried fiber optic computer wires. They used two rolls of 2'×12' STOP IT® on each repair.

Quote:
'Pipe was broken by a backhoe and we repaired it to keep moisture from getting in the wires. It worked very well.'

We All Need a Little Faith:
STOP IT® was used at a major university in Maryland to repair a leaking joint in a 2' diameter copper line carrying domestic water. The operating pressure was 40psi with a temperature of 120°F. They used three rolls of 2'×4' STOP IT® to fix the leak.
Quote:
'I've never had much faith in 'patch it' type repairs, but to avoid long downtimes at our dorms we tried your product with success. We have used this product five or six times and saved hours in downtimes. Thanks.'

Bury It:
A plumbing company in Saint Louis, Missouri used STOP IT® to repair a 4' crack in a 6' cast iron pipe that was four feet underground. The operating pressure was 60psi. Two rolls of 4'×12' STOP IT® were used to fix the leak.
Quote:
'The STOP IT® tape worked far beyond my expectations.'

 

Customer comments

No comments were found for STOP IT® Case Histories - Building Maintenace. Be the first to comment!