Struvite Removal

Struvite screw presses removal trial case study


Courtesy of Struvite Removal

Based on the lab supervisor’s recommendation, the plant ordered two 55 gallon drums of JS 9325 for a plant trial on the screw press. They set up a spray system to meter JS 9325 on the outer surface of the screw press. During the first five (5) days of the struvite removal trial, plant operations noticed that the openings on the screens were getting cleaner. They reduced the cleaning cycle from continuous spraying to 30 minutes of spraying at the end of operations each day. Plant operations observed that the screw press’ cake solids were higher and they had a lower dosage of polymer per dry ton. Plant operations deemed the trial a success.

Email or call +1-310-715-3070, and for more info visit


Customer comments

No comments were found for Struvite screw presses removal trial case study. Be the first to comment!