How do you eliminate problems associated with the collection of rainwater in outdoor containment systems and maintain compliance with EPA and Clean Water Act regulations? Since most outdoor oil storage tank sumps and oil drum spill pallets will inevitably be exposed to local precipitation and storm water runoff from nearby catchment surfaces, it is necessary to make sure you have measures in place to filter out any oil, fuels or other contaminants that could overflow or leak out of these secondary containment systems. In fact, the Spill Prevention, Control and Countermeasure Act (SPCC), a set of regulations ‘designed to prevent discharges of oil and oil-related materials from reaching navigable waters and adjoining shorelines’ mandates that industrial and agricultural operators take steps to filter these hydrocarbons before they can leach into the surrounding environment.
According to EPA regulation 40 CFR 264.175, Containment of Containers Containing Free Liquid, a containment system must be designed to operate as follows:
- The containment unit must underlie the containers and must be free of cracks or gaps and be sufficiently impervious to contain leaks, spills and accumulated precipitation.
- The base of the containment unit must be sloped or designed to drain and remove liquids resulting from leaks, spills or precipitation, unless the containers are elevated or otherwise protected from contact with accumulated liquids.
- The containment system must have sufficient capacity to contain 10% of the volume of containers or the volume of the largest container, whichever is greater.
To help eliminate problems associated with the collection of rainwater in outdoor containment sumps, tanks and berms, Interstate Products now offers UltraTech Self Bailers which allow for the passive filtration of hydrocarbons from storm water in outdoor containment products. This self-bailing filter system is simple to install, can be connected to almost any outdoor containment product, and offers the best protection for non-monitored containment sites. UltraTech Self Bailers are ideal for use in a variety of applications including: remote oil storage tanks used by farms and agricultural operations, as part of portable truck berm systems and any other outdoor containment areas. Self Bailers come in a variety of sizes. The standard size accommodates flow rate of up to 7.5 gallons per hour and larger sizes can handle up to 55 gallons per hour.
By using Self Bailers, modest spills and hydrocarbon 'sheens' are captured to provide a clean Stormwater runoff solution. In the event of larger or more concentrated spills, the filter will activate an auto-shut off mechanism stopping the flow of hazardous liquids or materials. There is also a manual shutoff valve which can be used to secure all draining operations. For periodic maintenance the filter cartridge is easy to replace, and the storm water drain should be cleaned through the outflow port. The UltraTech Self Bailer helps ensure your non-monitored containment sites keep a clean outflow and is an important tool to help you meet or exceed EPA state and federal Stormwater regulations for secondary spill containment.
Interstate Products’ full line of oil drum storage sumps and fuel tank storage products offer the best in hydrocarbon storage, fuel spill containment and oil spill control. As the authority on industrial and environmental spill control and remediation, IPI experts are here to help our customers source the right secondary containment products for their individual needs. Contact us toll free at 1-800-474-7294. To view our full selection of oil containment products please visit: http://store.interstateproducts.com/ultra_self_bailer.htm