ASTM International

ASTM International Metalworking Industry Standards: Environmental Quality and Safety, Fluid Performance and Condition Monitoring Tests (CD-ROM)

0

Optimal selection and use of metalworking fluids depends on multiple factors, including raw material selection, fluid formulation, water quality, in-process fluid management and good industrial hygiene practices. This new ASTM publication provides 39 standard test methods, practices, and guides, which are used to determine whether fluid properties are changing in a direction or at a rate that is likely to result in performance decline, increased worker health risk or both.

Audience: An excellent technical resource for operational and supervisory personnel employed by metalworking fluid compounders, fluid management service personnel, industrial hygienists, labor representatives and regulatory agency personnel responsible for fluid development and performance, industrial health and safety and system management.

ASTM International Metalworking Industry Standards: Environmental Quality, Health and Safety, Fluid Performance and Condition Monitoring Tests
TABLE OF CONTENTS

D 888-92 (1996) Test Methods for Dissolved Oxygen in Water
D 1067-02 Test Methods for Acidity or Alkalinity of Water
D 1068-03 Test Methods for Iron in Water
D 1126-02 Test Method for Hardness in Water
D 1401-02 Test Method for Water Separability of Petroleum Oils and Synthetic Fluids
D 1426-98 Test Methods for Ammonia Nitrogen In Water
D 1662-92 (2002) Test Method for Active Sulfur in Cutting Oils
D 2711-01a Test Method for Demulsibility Characteristics of Lubricating Oils
D 3519-88 (2002) Test Method for Foam in Aqueous Media (Blender Test)
D 3601-88(2002) E1 Test Method for Foam In Aqueous Media (Bottle Test)
D 3686-95(2001) E1 Practice for Sampling Atmospheres to Collect Organic Compound Vapors (Activated Charcoal Tube Adsorption Method)
D 3687-01 Practice for Analysis of Organic Compound Vapors Collected by the Activated Charcoal Tube Adsorption Method
D 4185-96(2001) E1 Practice for Measurement of Metals in Workplace Atmosphere by Flame Atomic Absorption Spectrophotometry
D 4490-96(2001) E1 Practice for Measuring the Concentration of Toxic Gases or Vapors Using Detector Tubes
D 4532-97 Test Method for Respirable Dust in Workplace Atmospheres
D 4597-97 Practice for Sampling Workplace Atmospheres to Collect Gases or Vapors with Solid Sorbent Diffusive Samplers
D 4599-97 Practice for Measuring the Concentration of Toxic Gases or Vapors Using Length-of-Stain Dosimeters
97
D 4600-95(2000) E1 Test Method for Determination of Benzene-Soluble Particulate Matter in Workplace Atmospheres
D 4627-92 (2002) Test Method for Iron Chip Corrosion for Water-Dilutable Metalworking Fluids
D 4727/D4727M-98 Specification for Corrugated and Solid Fiberboard Sheet Stock (Container Grade) and Cut Shapes
D 4856-99 E1 Test Method for Determination of Sulfuric Acid Mist in the Workplace Atmosphere (Ion Chromatographic)
D 4913-00 Practice for Determining Concentration of Hydrogen Sulfide by Direct Reading, Length of Stain, Visual Chemical Detectors
D 5337-97 Practice for Flow Rate for Calibration of Personal Sampling Pumps
D 5463-98 Guide for Use of Test Kits to Measure Inorganic Constituents in Water
D 5619-00 Test Method for Comparing Metal Removal Fluids Using the Tapping Torque Test Machine
D 6061-01 Practice for Evaluating the Performance of Respirable Aerosol Samplers
D 6246-02 Practice for Evaluating the Performance of Diffusive Samplers
D 6552-00 Practice for Controlling and Characterizing Errors in Weighing Collected Aerosols
E 686-91 (1998) Method for Evaluation of Antimicrobial Agents in Aqueous Metal Working Fluids
E 1269-01 Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry
E 1302-00 Guide for Acute Animal Toxicity Testing of Water-Miscible Metalworking Fluids
E 1497-00 Practice for Safe Use of Water-Miscible Metal Removal Fluids
E 1687-98 Test Method for Determining Carcinogenic Potential of Virgin Base Oils in Metalworking Fluids
E 1972-98 Practice for Minimizing Effects of Aerosols in the Wet Metal Removal Environment
E 2144-01 Practice for Personal Sampling and Analysis of Endotoxin in Metalworking Fluid Aerosols in Workplace Atmospheres
E 2148-01 Guide for Using Documents Related to Metalworking or Metal Removal Fluid Health and Safety
E 2169-01 Practice for Selecting Antimicrobial Pesticides for Use in Water-Miscible Metalworking Fluids
E 2250-02 Method for Determination of Endotoxin Concentration in Water Miscible Metal Working Fluids
E 2275-03 Practice for Evaluating Water-Miscible Metalworking Fluid Bioresistance and Antimicrobial Pesticide Performance Available in Print or CD-ROM!

Price:
Price (North America): $95
Price (Elsewhere): $105
Launch:
2003

Customer comments

No comments were found for ASTM International Metalworking Industry Standards: Environmental Quality and Safety, Fluid Performance and Condition Monitoring Tests (CD-ROM). Be the first to comment!