containment product Books

  • Premium

    Standard Methods for the Examination of Water and Wastewater, 23rd Edition

    Analysts, researchers, and regulators have relied on this peer-reviewed publication since 1905. The trusted source of accurate, proven methodology for analyzing natural waters, water supplies, and wastewaters. The 23rd edition of Standard Methods for the Examination of Water and Wastewater® contains over 400 laboratory methods for the analysis ...

  • Contained Gas Rule Changes

    New EPA regulation classifies 'oxidizers' as 'incinerators' meaning if this is not changed, the emissions standards and regulatory requirements associated with operating oxidizers become much more ...

  • Natural Production of Organohalogen Compounds

    This book summarizes the state-of-the-art knowledge on naturally occurring organohalogens, of which more than 3700 are documented. The chapters cover all aspects of this field, including the structural diversity and sources of organohalogens, the mechanisms for their formation and biodegradation, the clinical use of dichloroacetate, and the ...

  • Product Innovation and Eco-Efficiency

    Prefaced by Björn Stigson, President of the World Business Council for Sustainable Development, this book is one of the few that treats this topic by putting representatives of industry at centre stage. The book systematically addresses the drivers, the tools, and sector-specific elements that play a role in this process. The five chapters in ...

  • API RP 14E Standard for Exploration & Production

    This document recommends minimum requirements and guidelines for the design and installation of new piping systems on production platforms located offshore. The maximum design pressure within the scope of this document is 10,000 psig and the temperature range is −20°F to 650°F. For applications outside these pressures ...

  • API RP 2X Standard for Exploration & Production

    This recommended practice (RP) for nondestructive examination (NDE) of offshore structural fabrication and guidelines for qualification of personnel contains guidance on NDE methods which have evolved from fabrication experience with offshore structures. These methods are commonly used and have found acceptance due to their reliable detection of ...

  • Rubber and Related Products: New Methods for Testing and Analyzing

    One of the most comprehensive texts of its time, it contain 12 papers dealing with such topics as viscosity, vulcanizers, plasticity, theometrics, dynamic testing, physical testing, tensile testing and ...

  • API RP 13C Standard for Exploration & Production

    This International Standard provides a standard procedure for assessing and modifying performance of solids control equipment systems commonly used in the field in petroleum and natural gas drilling fluids processing.This procedure is not intended for the comparison of similar types of individual pieces of equipment.Clause 11 in this document ...

  • API SPEC 2C Standard for Exploration & Production

    GeneralThis specification details the requirements for design, construction, and testing of offshore pedestal mounted cranes. Offshore cranes are defined herein as pedestal mounted elevating and rotating lift devices of the types illustrated in Figure 1 for transfer of materials or personnel to or from marine vessels and structures. Offshore ...

  • API RP 14J Standard for Exploration & Production

    This document recommends minimum requirements and guidelines for the design and layout of production facilities on open-type offshore platforms, and it is intended to bring together in one place a brief description of basic hazards analysis procedures for offshore production facilities. This recommended practice discusses several procedures that ...

  • API RP 14FZ Standard for Exploration & Production

    This document recommends minimum requirements and guidelines for the design and installation of electrical systems on fixed and floating petroleum facilities located offshore when hazardous locations are classified as Zone 0, Zone 1, or Zone 2. For facilities classified as Division 1 or Division 2, reference API RP14F, Recommended Practice for ...

  • API RP 13D Standard for Exploration & Production

    The objective of this Recommended Practice (RP) is to provide a basic understanding of and guidance about drilling fluid rheology and hydraulics, and their application to drilling operations.The target audience for this RP covers both the office and wellsite engineer. The complexity of the equations used is such that a competent engineer can use a ...

  • API RP 14C Standard for Exploration & Production

    This document presents recommendations for designing, installing, and testing a basic surface safety system on an offshore production platform. The basic concepts of a platform safety system are discussed and protection methods and requirements of the system are outlined.This recommended practice illustrates how system analysis methods can be used ...

  • API RP 14F Standard for Exploration & Production

    This document recommends minimum requirements and guidelines for the design, installation, and maintenance of electrical systems on fixed and floating petroleum facilities located offshore. For facilities classified as Zone 0, Zone 1 or Zone 2, reference API 14FZ, Recommended Practice for Design and Installation of Electrical Systems for Fixed and ...

  • API RP 65 Standard for Exploration & Production

    FlowsThis document is the compilation of technology and practices used by many operators drilling wells in deep water. In a number of cases, there is not a single way of performing a specific operation. In some cases, several options may be listed, but in others there may be practices which are successful, but which are not listed in this ...

  • API RP 500 Standard for Exploration & Production

    This document applies to the classification of locations for both temporarily and permanently installed electrical equipment. It is intended to be applied where there may be a risk of ignition due to the presence of flammable gas or vapor, mixed with air, under normal atmospheric conditions. Normal atmospheric conditions are defined as conditions ...

  • ASTM Shipping Container Standards and Related Technical Materials: 5th Edition (Print)

    This new edition gives you all of the applicable standards, documents, and references for ASTM D 4169 Standard Practice for Performance Testing of Shipping Containers and Systems, including: • 18 ASTM standards• 7 ISTA test methods• Rule 180• Report FPL 22ASTM D 4169 provides a uniform basis for evaluating in a laboratory the ...

  • API RP 505 Standard for Exploration & Production

    This document applies to the classification of locations for both temporarily and permanently installed electrical equipment. It is intended to be applied where there may be a risk of ignition due to the presence of flammable gas or vapor, mixed with air, under normal atmospheric conditions. Normal atmospheric conditions are defined as conditions ...

  • ASTM Shipping Container Standards and Related Technical Materials: 5th Edition (CD-ROM)

    This new edition gives you all of the applicable standards, documents, and references for ASTM D 4169 Standard Practice for Performance Testing of Shipping Containers and Systems, including: • 18 ASTM standards• 7 ISTA test methods• Rule 180• Report FPL 22ASTM D 4169 provides a uniform basis for evaluating in a laboratory the ...

  • API RP 2A-WSD Standard for Exploration & Production

    This Recommended Practice for Planning, Designing, and Constructing Fixed Offshore Platforms contains engineering design principles and good practices that have evolved during the development of offshore oil resources. Good practice is based on good engineering; therefore, this recommended practice consists essentially of good engineering ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you