Industrialgas detectors form an important part of safety systems designed to protect users from the harmful effects of flammable, toxic or asphyxiant gases. These gases can cause explosions, damage health or deplete the oxygen content of the air. Consequently, accurate gas detection is vital for protecting human ...
This recommended practice (RP) is intended to provide recommended procedures, practices, and checklists for the installation and precommissioning of new, existing, and reapplied machinery and to assist with the installation design of such machinery for petroleum, chemical, and gasindustry services ...
This book is the latest in a series of respected volumes that provides an up-to-date review of some of the major chemistry topics related to the oil and gasindustry. Divided into four sections, it looks in turn at the latest developments in environmental issues, new technology, applications and flow ...
This International Standard provides requirements and guidelines for packers and bridge plugs as defined herein for use in the petroleum and natural gasindustry. This International Standard provides requirements for the functional specification and technical specification, including design, design ...
This standard covers the minimum requirements for special-purpose, enclosed, precision single- and double-helical one- and two-stage speed increasers and reducers of parallelshaft design for petroleum, chemical and gasindustry services. This standard is primarily intended for gear units that are in continuous ...
This International Standard provides the requirements for lock mandrels and landing nipples within the production/injection conduit for the installation of flow control or other equipment used in the petroleum and natural gasindustries. It includes the interface connections to the flow control or other ...
This standard covers the minimum requirements for axial compressors, single-shaft and integrally geared process centrifugal compressors and expander-compressor for use in the petroleum, chemical, and gasindustries services that handle air or gas. This standard does not apply to fans (covered by API Std ...
This standard covers the minimum requirements for sealless centrifugal pumps for use in petroleum, heavy duty chemical and gasindustry services. Refer to Appendix U for application information. Note: A bullet (•) at the beginning of a paragraph indicates that either a decision or ...
This standard covers the minimum requirements for liquid ring vacuum pump and compressor systems for service in the petroleum, chemical, and gasindustries. This includes both vacuum pump and compressor design and system design. The design of the system is critical to the successful operation of the liquid ...
1.1 Scope This standard covers the minimum requirements for controlled volume positive displacement pumps for use in service in the petroleum, chemical, and gasindustries. Both packed-plunger and diaphragm types are included. Diaphragm pumps that use direct mechanical actuation are excluded. See API Standard ...
This International Standard specifies requirements for the manufacture of two product specification levels (PSL 1 and PSL 2) of seamless and welded steel pipes for use in pipeline transportation systems in the petroleum and natural gasindustries. This International Standard is not applicable to cast ...
This standard covers the minimum requirements for dry and oil-flooded helical lobe rotary compressors (see Figure 1) used for vacuum or pressure or both in petroleum, petrochemical, and natural gasindustries. It is intended for compressors that are in special-purpose applications. It does not cover general ...
This recommended practice covers the minimum requirements for the inspection and repair of special purpose rotating equipment rotors, bearings and couplings used in petroleum, chemical, and gasindustry services. This recommended practice is separated into 7 specific chapters. Chapters 2 through 7 are to be ...
This international standard specifies the requirements for a series of compact steel gate, globe and check valves for petroleum and natural gasindustry applications. It is applicable to valves of: — nominal pipe sizes NPS 1/4, NPS 3/8, NPS 1/2, NPS 3/4, NPS 1, NPS 1 1/4, NPS 1 1/2, NPS 2, NPS 2 ...
This standard covers the minimum requirements for reciprocating compressors and their drivers for use in petroleum, chemical, and gasindustry services for handling process air or gas with either lubricated or non-lubricated cylinders. Compressors covered by this standard are low to moderate speed machines. ...
This International Standard specifies the requirements for couplings for the transmission of power between the rotating shafts of two machines in special-purpose applications in the petroleum, petrochemical and natural gasindustries. Such applications are typically in large and/or high speed machines, in ...
1.1 Scope This standard covers the minimum requirements for reciprocating positive displacement pumps for use in service in the petroleum, chemical, and gasindustries. Both direct-acting and power-frame types are included. See API Standard 675 for controlled-volume pumps and Standard 676 for rotary pumps. ...
This part of ISO 15547 gives requirements and recommendations for the mechanical design, materials selection, fabrication, inspection, testing, and preparation for shipment of brazed aluminium plate-fin heat exchangers for use in petroleum, petrochemical and natural gas ...
Scope, Purpose and Objective This publication is intended to assist the offshore oil and natural gas drilling and producing operators and contractors in assessing security needs during the performance of oil and natural gas operations. The offshore oil and natural gasindustry uses a wide variety of ...