Aanderaa Data Instruments - part of Xylem Analytics

51 products found

Aanderaa Data Instruments - part of Xylem Analytics Products

  • Other

  • AADI SmartGuard - Data Logger

    AADI SmartGuard - Data Logger

    The next generation sensor and instrument HUB for Ocean, Lake, Reservoir, Estuary and River Hydrometric stations. Monitoring water and weather  conditions is essential in many operations and the SmartGuard node is well suited for stand-alone stations powered by battery and solar power utilizing wireless real-time data communication. Designed for ease of integration of new and existing sensor technologies into a single Aanderaa observatory node...

  • AADI - Model RCM Blue - Self-recording Dedicated Current Meter

    AADI - Model RCM Blue - Self-recording Dedicated Current Meter

    A new self-recording dedicated current meter with Bluetooth for communications and data retrieval. The RCM Blue is a self-recording Current Meter which also measures water temperature in salt or fresh water, and a battery container with battery capacity up to 70Ah. The Doppler Current Sensor is an upgraded version of the proven SeaGuard ZPulse sensor. The instrument configuration and data retrieval is done via Bluetooth which eliminates the need to...

  • Aquaculture - Environmental Monitoring

  • AADI - Model DB 4700 - Data Buoy

    AADI - Model DB 4700 - Data Buoy

    Data Buoy DB 4700 is a unique Data Collecting System for Met/Ocean Parameters. The Buoy can accommodate a selection of sensors depending on customer’s request. Each Data Buoy is delivered as an Aanderaa Engineering solution to benefit the customer requirements.

  • Construction - Scales for Wheel Loaders and Excavators

  • AADI - Model Loadtronic 3  - Dynamic Weighing System for Wheel Loaders

    AADI - Model Loadtronic 3 - Dynamic Weighing System for Wheel Loaders

    Modern wheel loaders are designed for increased productivity under all conditions. It is important not to lose these properties after installing a weighing system. The Loadtronic 3 weighing system will never tell you to slow down, even on rough surfaces. It helps your company save time and money and increases your profit. This is possible because the Loadtronic 3 has the built-in dynamics system. Drive as you normally do, move fast and flexible....

  • LOADTRONIC 3E - Excavator Scale

    LOADTRONIC 3E - Excavator Scale

    The dynamic weighing system for mono boom excavators. The weighing system is based on the LOADTRONIC wheel loader scale which has been on the market for more than 20 years.

  • Conductivity Sensors

  • Aanderaa - Model 4319 - Conductivity Sensor

    Aanderaa - Model 4319 - Conductivity Sensor

    Conductivity Sensor 4319 is a compact fully integrated sensor for measuring the electrical conductivity of seawater. It is designed to be used with SeaGuard or SmartGuard datalogger using AiCaP CANbus or as stand-alone sensor using RS-232.

  • Model 4019  - Conductivity Sensor

    Model 4019 - Conductivity Sensor

    A compact fully integrated sensor for measuring the electrical conductivity of seawater. Designed to be mounted on the Recording Doppler Current Profiler RDCP 600. Two versions of this sensor are available, 4019B has enhanced accuracy compared to 4019A, see specifications overleaf.

  • Model 3919/4119/4120 D344 - Conductivity Sensor

    Model 3919/4119/4120 D344 - Conductivity Sensor

    Conductivity Sensor 3919 Conductivity/Temperature Sensor 4119 Conductivity Sensor with analog output 4120 are compact fully integrated sensors for measuring the electrical conductivity of seawater. The 3919 model is designed to be mounted directly on the top-end plate of RCM9/11 and RDCP as well as for stand alone operation via the SR10 or RS-232 interface. The 4119 model can be connected via cable to a AADI SR10/VR22 Data logger, and the 4120 model...

  • Aanderaa - Model 4419R - Conductivity Sensor

    Aanderaa - Model 4419R - Conductivity Sensor

    Conductivity Sensor 4419R is a compact fully integrated sensor for measuring the electrical conductivity of sea-water. 4419 is designed to be used as standalone sensor using RS-422. For applications with either AiCaP or RS-232 use please refer to Conductivity sensor 4319.

  • Doppler Current Sensor (DCS)

  • Model 4100/4100R - Doppler Current Sensor

    Model 4100/4100R - Doppler Current Sensor

    A rugged, true vector averaging sensor for measuring current speed and direction in the sea. 4100 model: SR10 output for AADI dataloggers 4100R model: RS232 output for third party dataloggers.

  • Oxygen Optodes

  • Model 3835/4130/4175 - Oxygen Optodes

    Model 3835/4130/4175 - Oxygen Optodes

    Oxygen Sensor 3835 Oxygen/Temperature Sensor 4130 Oxygen Sensor w/analog output 4175 are compact fully integrated sensors for measuring the O2-concentration. The 3835 model is designed to be mounted directly on the top-end plate of RCM-9 or RDCP as well as for stand alone operation using SR10 or RS-232 interface. The 4130 model can be connected via cable to AADI SR10/VR22 Data logger, and the 4175 model provides analog output to third party data...

  • Model 3830/3930/3975 - Oxygen Optodes

    Model 3830/3930/3975 - Oxygen Optodes

    Oxygen Sensor 3830 Oxygen/Temperature Sensor 3930 Oxygen Sensor w/analog output 3975 are compact fully integrated sensors for measuring the O2-concentration. The 3830 model is designed to be mounted directly on the top-end plate of RCM-9/11 or RDCP as well as for stand alone operation using SR10 or RS-232 interface. The 3930 model can be connected via cable to AADI SR10/VR22 Data logger, and the 3975 model provides analog output to third party data...

  • Pressure Sensors

  • Model 4017 - Water Pressure and Temperature Sensor

    Model 4017 - Water Pressure and Temperature Sensor

    Pressure Sensor 4017 is a compact fully integrated sensor for measuring the pressure level and the water temperature. The sensor is designed to be mounted directly on the top-end plate of RCM 9/11,RDCP or via cable to AADI Data logger using SR10. The sensor can also be used as stand alone sensor using RS-232. The sensor is easily integrated in other measurement systems with third party data loggers.

  • Model 4117 - Water Pressure Sensor

    Model 4117 - Water Pressure Sensor

    Pressure Sensor 4117 is a compact fully integrated sensor for measuring the pressure level and the water temperature. The sensor is designed to be mounted on the AADI SEAGUARD® using AiCaP CANbus or as stand alone sensor using RS-232. The sensor is easily integrated in other measurement systems with third party data loggers.

  • Model 4646/4646R - Pressure Sensor

    Model 4646/4646R - Pressure Sensor

    Pressure Sensor 4646/4646R is a compact fully integrated sensor for measuring the pressure level and the water temperature. The 4646 sensor is designed to be mounted on the AADI SEAGUARD® using AiCap CANbus, or in other measurement systems using the RS-232 interface. The 4646R sensor is designed for use with long cables by means of an RS-422 full duplex interface. The R-version can not be used in SEAGUARD® applications.

  • Aanderaa - Model 4117/4117R - Pressure Sensor

    Aanderaa - Model 4117/4117R - Pressure Sensor

    Pressure Sensor 4117/4117R is a compact fully integrated sensor for measuring the pressure level and the water temperature. Tne 4117 sensor is designed to be mounted on the Aanderaa SeaGuard platform or connected to SmartGuard using AiCaP CANbus or as stand alone sensor using RS-232. The sensor is easily integrated in other measurement systems with dataloggers. The 4117R sensor is designed for use with long cables by means of RS-422 full duplex...

  • Temperature Sensors

  • Model 4050 - Temperature Sensor

    Model 4050 - Temperature Sensor

    Temperature Sensor 4050 is a compact fully integrated sensor for measuring the water temperature. The sensor is designed to be mounted on AADI RCM 9, RCM 11.The sensor can also be used as stand alone, and is easily integrated in other measurement systems with third party dataloggers.

  • Aanderaa - Model 4060 - Temperature Sensor

    Aanderaa - Model 4060 - Temperature Sensor

    Aanderaa temperature sensors are compact, intelligent temperature sensors designed for use on Aanderaa Data Instruments Dataloggers and as stand-alone units. A compact fully integrated sensor for measuring the water temperature. The sensor is designed to be mounted on Aanderaa Recording Instruments and Dataloggers. The sensor can also be used as stand alone, and is easily integrated in other measurement systems with third party dataloggers.

  • Temperatur Sensor 4880/4880R

    Temperatur Sensor 4880/4880R

    Temperature Sensor 4880/4880R is a compact fully integrated sensor for measuring the water temperature. The sensor is designed to be mounted on the AADI SEAGUARD® Platform and in other measurement systems.

  • Wave and Tide Sensor

  • Wave and tide sensor 4648/R

    Wave and tide sensor 4648/R

    Wave and tide sensor 4648/4648R is a compact fully integrated sensor for measuring the wave and tide conditions. The 4648 sensor is designed to be mounted on the AADI SEAGUARD® using AiCaP CANbus or in other measurement systems using RS-232 interface. The 4648R sensor is designed for use with long cables by means of an RS-422 full duplex inetrface. The R-version can not be used in SEAGUARD® applications.

  • Turbidity Sensors

  • Aanderaa - Model 4112 - Turbidity Sensor

    Aanderaa - Model 4112 - Turbidity Sensor

    The Aanderaa Turbidity sensors detects infra-red light scattered by particles suspended in water. This measurement is known to have a good correlation to the amount of suspended matter in water and can be used to monitor e.g. sediment, algae or particle pollution. The sensor generates an output voltage proportional to the turbidity or suspended solids. The low power consumption makes it ideal for applications where battery drain is a concern.

  • Model 4705 - Turbidity Sensor

    Model 4705 - Turbidity Sensor

    Turbidity Sensor 4705 fits directly onto the top end plate of the RDCP. Turbidity sensor 4705 consists of Turbidity sensor 4640 and Analog converter 4649.

  • Water Level Sensors

  • Wave and Tide

  • Wave and Tide Sensor 4648/4648R

    Wave and Tide Sensor 4648/4648R

    Wave and Tide Sensor 4648/4648R is a compact fully integrated sensor for measuring the wave and tide conditions. The 4648 sensor is designed to be mounted on the AADI SEAGUARD  using AiCaP CANbus or in other measurement systems using RS-232 interface. The 4648R sensor is designed for use with long cables by means of an RS-422 full duplex inetrface. The R-version can not be used in SEAGUARD  applications.

  • Air Sensors

  • Mira Visibility Sensor 3544/3544 EX

    Mira Visibility Sensor 3544/3544 EX

    A compact and rugged visibility sensor designed for use with Aanderaa Weather Stations, Road Weather Stations and Environmental Monitoring Systems.

  • Net Radiation Sensor 2811

    Net Radiation Sensor 2811

    Net Radiation Sensor 2811 measures the difference between incoming and outgoing radiation at the Earth´s surface. It is designed for use with Aanderaa Automatic Weather Station 2700.

  • Rainfall Sensor 3864

    Rainfall Sensor 3864

    A Rain-o-matic® water precipitation sensor adapted for use with Aanderaa Field Monitoring Equipment.

  • Model 3445 - Relative Humidity Sensor

    Model 3445 - Relative Humidity Sensor

    Relative Humidity Sensor 3445 is designed for use with the Aanderaa Automatic Weather Station 2700, Dataloggers 3660 or 3634 and other sensor readout units.

  • Road Condition Sensor 3565

    Road Condition Sensor 3565

    A sensor monitoring road surface temperature, wet or dry road, snow coverage and the salinity (freezing point) of the moisture on the road surface.

  • Solar Radiation Sensor 2770

    Solar Radiation Sensor 2770

    A sensor for incoming solar and sky radiation, specially designed for use with Aanderaa Automatic Weather Station 2700 and Datalogger 3660.

  • Model 2740/2740 EX - Wind Speed Sensor

    Model 2740/2740 EX - Wind Speed Sensor

    This sensor will measure the average and maximum wind speed (gust) during the sampling interval. It is designed for use with the Aanderaa Automatic Weather Stations, Sensor Scanning Unit 3010, Dataloggers 3660/3634, Display Units 3315/3017 or Wind Display Panels 3400/3300.

  • Current Sensors

  • Aanderaa - Current Sensors

    Aanderaa - Current Sensors

    The Aanderaa Doppler Current Sensor is a rugged, true vector averaging sensor for measuring current speed and direction in the sea. The sensor has built-in compass and tilt sensor and may also output sea temperature. The speed range is 0 to 300 cm/s. Low current drain and flexible sampling schemes. New multi-frequency Doppler Current Sensor (DCS) with ZPulse technology achieves better performance using only half the power than previous models. The...

  • AADI - Oxygen Optodes

    AADI - Oxygen Optodes

    The AADI Oxygen optode was the first and only to measure dissolved oxygen for years without drift  - now it is one of the fastest! The Oxygen optode is designed to measure absolute oxygen concentration and % saturation. The optode can be used from streams to deep sea, from fish farms to waste water and from polar ice areas to hydrothermal vents.

  • SeaGuardII - DCP Wave

    SeaGuardII - DCP Wave

    The optimal solution to measure directional waves, currents and water quality in one instrument The SeaGuardII DCP Wave is a 600kHz Doppler Current Profiler that can measure directional wave parameters and currents from a bottom mounted installation. The SeaGuardII DCP Wave completes the range of wave measurement from Aanderaa. The Acoustic Wave software 5759 used by the DCPS implements unique features to improve the wave measurement accuracy by...

  • Aanderaa - Model 5217/5217R - Tide Sensors

    Aanderaa - Model 5217/5217R - Tide Sensors

    The Aanderaa Tide sensors are compact fully integrated sensor for measuring the tide conditions. Tide Sensors 5217/5217R are compact fully integrated sensors for measuring the tide conditions. The sensor is designed to be mounted on the Aanderaa multiparameter SeaGuard® Platform or via cable connected to SmartGuard datalogger. The standard version has AiCaP CANbus and RS-232 output. R-version has RS-422 output for longer cable length. The sensor...

  • SeaGuardII - Model DCP - Acoustic Profiler

    SeaGuardII - Model DCP - Acoustic Profiler

    The acoustic profiler joining the SeaGuard family. It features innovative development of the acoustic profiling capacity and an exceptional ability to collect high quality current information on moving and tilting moorings. Available as a self-recording instrument, it also integrates unique real time features to meet your application needs.

  • SEAGUARD Products

  • AADI SmartGuard - Recorder Platforms

    AADI SmartGuard - Recorder Platforms

    SeaGuard Recorder platforms provides the user with the possibility to perform long term monitoring of sea and inland water using the latest technology for measurement.

  • AADI SmartGuard - Model WTR - Wave and Tide Recorder

    AADI SmartGuard - Model WTR - Wave and Tide Recorder

    The SEAGUARD WTR is a robust instrument based on the SEAGUARD Platform. It is a self contained instrument for measuring wave parameters, water level and temperature. The SEAGUARD WTR application areas are in fixed installations, either deployed in a seabed installation in shallow waters, or mounted onto a fixed structure in the upper water column. Typical applications for the sensor are measurements of wave and tide in ports and harbors, marine...

  • AADI SmartGuard - Model CTD - Conductivity, Temperature and Depth Robust System

    AADI SmartGuard - Model CTD - Conductivity, Temperature and Depth Robust System

    SeaGuard CTD Recorders may be used as a multi-parameter instrument in the sea and in freshwater and feature a modular plug-and-play architecture. SeaGuard CTD Recorders: Conductivity, Temperature and Depth. SEAGUARD® Products are based on modern technology and are the basic modules of our underwater observatory.  

  • AADI SmartGuard - Model O2 - Oxygen Recorder

    AADI SmartGuard - Model O2 - Oxygen Recorder

    Provides the user with the possibility to perform long term monitoring of sea and inland water oxygen content using the latest technology for oxygen measurement SEAGUARD® Products are based on modern technology and are the basic modules of our underwater observatory. It may be used as a multi-parameter instrument in the sea and in freshwater and feature a modular plug-and-play architecture using CANBus based AiCap smart sensor technology. It...

  • AADI SmartGuard - Real-Time Communication System

    AADI SmartGuard - Real-Time Communication System

    The Aanderaa Real-Time Communication System is designed to provide our customers and system integrators with powerful and efficient tools for data collection and control of our latest generation oceanographic instruments.

  • AADI SmartGuard - String System

    AADI SmartGuard - String System

    The Aanderaa SEAGUARD - String System is a complete and flexible subsea observatory, for measurements of e.g. dissolved oxygen, conductivity, temperature, current, pressure and tide.