Products and Equipment from Adedge Water Technologies, LLC

AdEdge - Model E33 - Adsorption Treatments Systems

In the adsorption process, contaminants break their bond with the water molecules and chemically adhere to a filter media. This is typically accomplished by directing the water flow through pressure vessels containing the filter media at a rate that allows enough contact time for adsorption to occur. AdEdge Water Technologies’ Bayoxide E33

AdEdge - Coagulation/Filtration Treatment Systems

Coagulation filtration is a process that introduces a coagulant, typically an iron or aluminum salt, to pretreat water contaminated with arsenic, iron, manganese, and/or

AdEdge - General Water Filtration Systems

Filtration is a physical method of removing suspended solids from a solution. In water treatment applications, these solids may range from dirt, plant material, and debris washed into the water supply to bacteria, viruses, and other microscopic particles that occur naturally. These particles can damage pumps and valves, decrease the effectiveness of treatment processes such as disinfection, and cause the water to look dirty and undesirable for...

AdEdge - Ion Exchange (IX) System

Ion Exchange (IX) is a method of removing undesirable metallic salt ions from water by exchanging them with other ions attached to a media or resin. This chemical process occurs because ions have differing affinities for the resin and these ions will replace ions with less attraction as they flow over the media. The ions most often used as the exchange ions are sodium and chloride. Ions typically removed in this process are nitrate, uranium,...

AdEdge - Reverse Osmosis Treatment Systems (ROTS)

Reverse Osmosis (RO) membrane solutions from AdEdge Water Technologies use advanced membrane technology coupled with our other packaged treatment modules to create a complete integrated solution. Our systems can serve a variety of applications including drinking water, mining, boiler feeds, remediation, and industrial process water. Whether your water treatment application is for the reduction of total dissolved solids (TDS), total suspended...

AdEdge - Model AD26 - Oxidation/Filtration Treatment Systems

Designed and built specifically for wellhead treatment, AD26 oxidation/filtration systems are engineered as stand alone systems for the removal of iron, manganese, hydrogen sulfide, and arsenic (if it coexists with high levels of iron). These systems are ideal for eliminating nuisance parameters and improving overall water quality.

AdEdge - Pre & Post Water Filtration Treatments System

With certain water parameters, an essential aspect of effective treatment is adequate pretreatment of the raw water before reaching the primary treatment system. This is true whether the application is for potable water, commercial, industrial, or environmental. Without proper understanding of the water chemistry and parameters that affect system performance, whether it is a media or membrane system, high operational costs or non-performance will...

AdEdge-Rotec - Ultra-High Recovery Flow Reversal Reverse Osmosis Systems

AdEdge – Rotec bring to the market an innovative desalination technology called Flow Reversal (FR-RO) designed to be implemented in existing and new desalination facilities for brackish water and other industrial applications, enabling significant system performance improvements, leading to higher profitability, reduced operating costs and environmental impact associated with...

AdEdge - Model H2Zero - Backwash/Recycle Systems

H2Zero Backwash/Recycle Systems conserve water by storing and treating contaminated backwash water from filtration and treatment systems. Nearly all water filtration related processes that remove target contaminants generate some liquid or solid residuals that need to be subsequently managed.

biottta - Biological Filtration Water Treatment System

Groundwater is the primary water source for most communities in North America. With an increasing need to provide treatment for a growing list of contaminants, limited support staff, and shrinking operating budgets, water utilities face many hardships. Fortunately, biottta leverages nature to offer an affordable and sustainable solution for wellhead treatment of inorganic and organic contaminants.

NoMonia - Biological Water Filtration Systems

Ammonia is an increasing concern for many communities throughout North America. While it is currently unregulated by the USEPA, the World Health Organization (WHO) set a recommended maximum contaminant level of 0.2 mg/L in drinking water. Concerns, however, related to water contaminated by ammonia should not be taken lightly. If ammonia-generated nitrification occurs in the distribution network, it may lead to pipe corrosion, biofilm generation,...

AdVantEdge - Medallion POE Systems

AdVantEdge Medallion Series POE systems are ideal for whole-house arsenic treatment. No chemicals, no regeneration, low maintenance, worry free arsenic removal for the entire household. It’s the most economical and effective whole-house treatment available. The adsorption process using AD33 granular ferric oxide provides the best arsenic removal performance of any available technology and is considered the standard in the industry. Medallion...

AdEdge - Model APU Series - Packaged Unit Systems

AdEdge Packaged Unit (APU) systems are designed, packaged, and assembled as a turnkey treatment solution for a variety of contaminants. These systems arrive at your site ready to hook up and begin operation. With a variety of custom options available, APU systems are custom designed and engineered to meet the specific needs of your site. APU systems are available in a variety of flow rates and configurations to meet the treatment needs of...

AdEdge - Model ADIN - Chemical Feed Systems

With certain water parameters, an essential aspect of effective treatment is adequate pretreatment of the raw water before reaching the primary treatment system and or post treatment for applications such as potable water. This is a guiding principle behind our integrated treatment solutions.

AdVantEdge - Advantedge Residential Treatment Solutions

The AdVantEdge™ line of products from AdEdge Water Technologies, LLC is a complete line of water treatment products to remove arsenic from drinking water in individual households. The AdVantEdge residential product line includes single tap or point-of-use (POU) systems and whole house or point-of-entry (POE) systems.

AdEdge - Model InGenius - Main Control Panels

InGenius control panels are custom engineered programmable logic control panels designed to meet site specifications for monitoring and integrating AdEdge designed treatment systems with auxiliary equipment and controls for water systems.

AdEdge - Integrated Water Filtration Treatment Systems

With our integrated system approach AdEdge can integrate a custom treatment solution to meet your needs. Using our APU (Adedge Packaged Unit), Modular, and/or Membrane systems, we integrate pre and post treatment processes to provide a “one stop shop” approach for managing your total treatment need.

AdEdge - Model EPA - Modular Water Filtration Systems

EPA regulations for contaminant removal have placed an unprecedented challenge upon small public water systems to cost-effectively meet safe drinking water compliance objectives. Many small potable water systems such as schools, day care centers, housing developments, and manufacturing facilities need options that are simple, affordable, and effective. Additionally, solutions are needed that require less engineering by adapting to existing space, and...

AdEdge WaterPOD - Containerized Treatment Units

WaterPOD Containerized Treatment Units from AdEdge Water Technologies have been developed to meet the growing U.S. and International demand for small footprint, cost-effective modular water treatment installations. The fully integrated, pre-engineered, pre-wired, packaged water treatment solution combines system performance with economy resulting in an ideal solution for sites where space, cost, and schedule are critical.

AdEdge - Model TOC - Total Organic Carbon (TOC)

Total Organic Carbon, or TOC, is the measurement of organic, carbon-based contaminants in water. This contamination can occur from a wide array of sources including petroleum, PVC cement, plastics, industrial process residuals, and even bacteria.

AdEdge - Volatile Organic Compounds (VOCs)

The most common volatile organic compounds, or VOCs, found in water are chlorinated solvents (septic tanks, cleaning products, plastic materials, degreasing agents) and fuel components. If these compounds are improperly disposed of, they can easily leach into both groundwater and surface water supplies.

Adedge Water Technologies, LLC Products

Treatment Processess