20 products found
Advanced Geosciences, Inc. Products
-
Marine-Borehole Passive Electrode Cable
AGI’s marine and borehole passive electrode cables are waterproof, multi-conductor cables used for resistivity, induced polarization (IP) and self-potential measurements. They require the use of the Multi-Electrode SwitchBox or Multi-Electrode Switchbox Grid when more than 4, 7, 9 or 11 electrodes are used ...
-
Switch Box Grid
A Switch Box with a grid of sealed connectors for custom electrodes. The all new Switch Box Grid is used to connect electrodes using wires terminated with banana plugs. The Switch Box Grid is available for the SuperSting WiFi and the SuperSting R8 models, it is not compatible with the SuperSting R1 ...
-
SuperSting Wi-Fi - Earth Resistivity Monitoring - Induced Polarization Imaging - Self-Potential Portable Instrument
The SuperSting Wi-Fi is a next-generation electrical resistivity meter and induced polarization (IP), and self-potential (SP) system, used to scan and image the subsurface of the earth and visualize the results in 2D slices or 3D volumes. The fully automated ...
-
MiniSting - Model Rapide R17S - Electrical Resistivity Meter
The MiniSting R1 is a high-powered, induced polarization (IP) and electrical resistivity instrument used for testing grounding grids, soil resistivity testing for corrosion protection design, and more. This single-channel tool is engineered to be the best tool for manual resistivity jobs—ease of use, low cost, and high accuracy make it ...
-
PowerSting - High Powered External IP Transmitter
The PowerSting system is a series of external high-power transmitters—5-kilowatt, 10-kilowatt, and 15-kilowatt—specifically engineered for the SuperSting instrument. The PowerSting system is a fully programmable constant voltage/constant current source. It is available with ...
-
SuperSting - AC/DC Power Supply for Earth Resistivity Monitoring Instruments
The SuperSting AC/DC Power Supply is used with a motor generator (not included) to power the SuperSting Wi-Fi system. We recommend the the Honda i1000 generator, as it is available in many hardware stores around the world. With half a gallon (1.9 liter) of gasoline, the ...
-
SuperSting - Model R8 - Adapter Box for Earth Resistivity Monitoring Instruments
Rapid SP measurements with the SuperStingR8 Wi-Fi. SP on 8 channels and multi-electrode AGI Switch Box or Dual-Mode cables. Receiver Test to test SuperStingR8 functions and calibration. IP Test load to test SuperStingR8 induced polarization measurements. Connect remote or infinity electrode wire when needed for deeper exploration depth. Connect single conductor wire to the ABMN ports for VES/1D/manual resistance tests (wenner 4 pin, schlumberger and ...
-
Multi Electrode Switch Box for Seepage Monitoring
AGI’s Multi-Electrode Switch Box is an accessory to the SuperSting Wi-Fi. It allows the SuperSting Wi-Fi to automatically control and switch passive electrodes connected by a passive multi-electrode ...
-
PowerSting - High Powered Transmitter Electrodes for High-Power Induced Polarization (IP) / Resistivity Tomograph
y. PowerSting Transmitter Nodes make it possible to automatically inject a high power (max 3,000 V, max 12 A, max 15 kW) DC current into the ground along a survey ...
-
Passive Graphite Electrode Cable for Groundwater Imaging
AGI’s passive graphite electrode cable (U.S. Patent 6,674,286) is used in corrosive environments and where electrolysis—metal contact with water—can occur. Instead of thermoplastic—which is less expensive and easier to apply—we use thermoset polyurethane which ensures that our electrodes chemically adhere to the outer ...
-
Passive Electrode Cables
AGI’s passive electrode cables are waterproof, multi-conductor cables used for resistivity measurements, self potential and induced polarization (IP) measurements. They require use of the Multi-Electrode ...
-
PowerSting Transmitter Node
AGI’s PowerSting Transmitter Nodes make it possible to automatically inject a high-power direct current (DC) into the ground along a survey line for high-powered induced polarization (IP) and resistivity tomography. With the 56-node system, you can reach depths of ...
-
Active Electrode Cables
AGI’s active dual-mode electrode cables (U.S. Patent 6,404,203) are used for ultra-sensitive automatic induced polarization (IP) measurements using nonpolarizable electrodes. The dual-mode electrodes have a receiver channel that is isolated from the transmitting ...
-
Model OBEi1 - Deep Marine Ocean Bottom Electrical Imager 1
The OBEi1 Deep Marine is a state-of-the-art ocean-bottom electrical imager. A remotely operated underwater vehicle (ROV) carries the OBEi1 and is pulled behind a boat with a cable system at roughly one kilometer in depth. The cable—which typically spans approximately 1 kilometer behind the ROV—uses a Kevlar-strength member, water block inner seal, and ruggedized marine jacket. The OBEi1 sensor has 56 AGI graphite electrodes (US ...
-
SuperSting - Marine Resistivity Module
The SuperSting Marine Resistivity is an add-on module to the SuperSting Wi-Fi, our multi-channel electrical imaging system. It allows for the collection of streaming marine (towed cable) data. Items in this module allow hydrographic surveys with continuously recording electrical resistivity imaging data which contain positional data from a GPS receiver, along with the depth profile measured with 200Khz echo ...
-
PowerSting - Sting Generator Set (SGS) - Power Generator for Mineral Exploration
The PowerSting Generator is the highest-powered air-cooled generator on the market and has been engineered and designed to be an accessory to our PowerSting. The PowerSting Generator is only 450 pounds, eliminating the need for a 1,500-pound, water-cooled diesel generator. The light weight makes it ideal for mineral exploration, where equipment needs to be transported by aircraft, carried by off-road vehicles, or moved by hand through tough ...
-
SuperSting - Landfill Monitoring System
The SuperSting Monitoring System is an add-on module to the SuperSting Wi-Fi, our multi-channel electrical imaging system. It monitors landfills, well sites, dams, and other unattended locations where changes of resistivity conditions over time must be recorded and ...
-
Non-Polarizable Electrode
These chemically neutral Non-Polarizable Electrodes are indispensable for surveys requiring precise, sensitive measurements. Simply add distilled water as needed before use in surveys. Non-Polarizable Electrodes are essential for induced polarization (IP) and self/spontaneous potential (SP) surveying—methods useful for identifying leakage in dams, locating minerals, and searching for chlorinated solvents like ...
-
High Voltage Electrode Warning Covers
High Voltage Electrode Warning Covers alert curious onlookers that an electrical resistivity imaging survey is in progress. The high-visibility, bright yellow covers alert passerby that there is dangerous voltage at a given place and provide a visible warning that protect buried electrode stakes from being tripped over, trampled on, or removed. These covers are must-haves to ensure the safety of your ...
-
AGI FlexLite - Passive Electrode Cable
FlexLite Passive Electrode Cables; AGI FlexLite Cables are 35% lighter and utilize half of the previous volume while maintaining the same low noise and rugged design. AGI has eliminated extra space not needed in the previous design and utilized more advanced materials and construction ...
