Agru Ireland Ltd. T/A Lining Tech

15 products found

Agru Ireland Ltd. T/A Lining Tech Products

  • Geomembranes

    Geomembranes are geosynthetic lining material manufactured to act as impermeable membrane. Geomembrane materials are manufactured in rolls and panels of the material are fusion welded together to produce a liner of the required shape and size. Geomembranes are used for a vast range of applications which include solid waste containment, mining, and water containment applications, large storage reservoirs, tanking solutions, etc. Lining Tech supply and install the following types of geomembran

  • High Density Polyethylene Liners (HDPE) Liners

    High Density Polyethylene Liners (HDPE) Liners

    High Density Polyethylene Liners are available in thicknesses from 0.7mm to 2.5mm and are produced with either smooth or textured surfaces. HDPE geomembranes are fusion welded together to produce a geomembrane lining system which can provide a complete seal against even the most toxic substances. Typical applications for HDPE geomembranes include landfill cell linings, in environmental containment systems for the protection of groundwater and in water...

  • Linear Low Density Polyethylene Liners (LLDPE) Liners

    Linear Low Density Polyethylene Liners (LLDPE) Liners

    Linear Low Density Polyethylene Liners are manufactured with high quality resins specifically formulated for flexible geomembranes. LLDPE geomembranes are used for applications where increased flexibility and elongation of materials are required. LLDPE geomembranes are available in thicknesses from 1.0 mm to 2.5mm and are produced with either smooth or textured surfaces. Geomembranes are fusion welded together to produce a geomembrane lining system...

  • Conductive HDPE Liners

    Conductive HDPE Liners

    Conductive HDPE liner is a 100% spark-testable, premium grade, high density polyethylene (HDPE) geomembrane liner. specially formulated using polyethylene resins and is a coextruded product. The lower surface of Conductive HDPE is a thin layer of polyethylene containing electrically conductive carbon black. This allows for the easy and efficient spark testing of the material to detect post installation damage and to locate potential leaks. This...

  • Hydroclick Liners

    Hydroclick Liners

    The HYDROCLICK system is a Polyethylene lining system specially design for use in potable water lining applications. The product is perfectly suited for this application due to the requirement for purity, mechanical strength and long life expectancy. The system consists of a CLICK profile which is mechanically fixed to the concrete surface. The sheet is then clicked into the profile and adjoining sheets are extrusion welded together. The design of the...

  • Suregrip - Concrete Protection Liners

    Suregrip - Concrete Protection Liners

    Suregrip is a combined HDPE and PP lining material which is used for concrete sealing and protection in new concrete tanks. The sheets of material are butted together and tacked to the inside of shutters prior to pouring the concrete structure. The stubs on one side of the material provide an anchoring mechanism for the material to the concrete. Once the shutters have been stripped the joints in the material are extrusion welded to provide a fully...

  • Geosynthetic Clay Liners

    Geosynthetic Clay Liners

    A Geosynthetic Clay Liner (GCL) is a self-sealing lining material. It has a composite structure that utilises the strength of millions of needle-punched fibres to secure a uniform layer of high swelling sodium bentonite. Polymer fibres and a naturally occuring clay material create very balanced combination, creating the ultimate sealing layer with high long-term shear strength. Once hydrated, GCL’s provide an effective barrier against liquids,...

  • Geosynthetic Materials

    Geosynthetics materials are used to solve civil engineering problems fast, effectively and economically.  The polymeric nature of the products makes them suitable for use in the ground where high levels of durability are required. Properly formulated, however, they can also be used in exposed applications. Geosynthetics are available in a wide range of forms and materials, each to suit a slightly different end use. These products have a wide range of applications and are currently used

  • Soil Geogrids

    Soil Geogrids

    A geogrid is geosynthetic material used to reinforce soils and granular materials in areas where poor ground conditions exist. They are also used to stabilise existing steep slopes and embankments which may be unstable . Geogrids are commonly used in road constructions and also in embankment construction in landfills. Other possible applications for geogrids include foundation construction for wind turbines, retaining structures and construction of...

  • Geocomposites

    Geocomposites

    Geocomposites are geosynthetic materials used for the collection of surface water and gases as an alternative to traditional filter stone. Geocomposites consist of a combined filter geotextile and polyethylene core which acts as a drainage path for the collection of liquids and gases. The filter geotextile allows the free passage of liquids through itself, into the core of the product where the liquid can drain to a predetermined collection point.

  • Combigrids

    Combigrids

    Combi grid A combigrid is a composite product of a geogrid and a non woven geotextile firmly welded between the reinforcement bars, for soil stabilisation, separation and filtration applications. Combigrid combines all the requirements of a variety of properties in one single product. For this reason, the main area of use for Combigrid is on weak subsoils where, in addition to reinforcement, filter and separating properties are required. As a rule,...

  • Erosion Control Mats

    Erosion Control Mats

    Erosion Control Erosion Control Mats are three-dimensional geosynthetics and composites which prevent the removal and transport of soil particles by both water and wind. Erosion control mats are used for slope and ground protection in road building, landscaping, and landfill engineering works. Waterways engineering works employ erosion control mats on flood plains and embankments. Properly dimensioned it prevents the sliding and washing out of the...

  • Specialist Fabrications

    Specialist items can be fabricated from both HDPE and LLDPE lining materials to produce individual items designed specifically to suit the design requirements of sites. Items generally fabricated using these materials can include pipe booths, manifolds, knock out pots, HDPE chambers and sumps, etc. Items are fabricated in our workshop and can be fabricated to suit almost any design.

  • HDPE Manifolds

    HDPE Manifolds

    HDPE manifolds are used in gas collection systems in landfill to collect, control and distribute the gas collected from individual gas pipes into main collection gas mains. Manifolds are constructed from HDPE due to the materials high resistance to corrosion by the landfill gas. Maniflods can be constructed in numerous shapes, sizes and arrangements depending on the design requirements of the site.

  • HDPE Condensate Pots

    HDPE Condensate Pots

    Condensate PotsHDPE condensate pots are used in gas collection systems in landfill to remove condensate which collects in gas collection pipelines. Condensate pots can be either self draining or pumped depending on the system design and are installed at low points along the gas pipeline.  and pipes the gas collected from individual gas pipes into main collection gas mains. Condensate pots are constructed from HDPE due to the materials high...

  • HDPE Sumps and Tanks

    HDPE Sumps and Tanks

    HDPE SumpsHDPE sumps and tanks are used in leachate collection systems in landfill to collect and monitor leachate levels within the landfill. Sumps are constructed from HDPE due to the materials high resistance to corrosion by the landfill gas and leachate. Sumps and tanks can be constructed in numerous shapes, sizes and arrangements depending on the design requirements of the site.

  • HDPE inspection Chambers

    HDPE inspection Chambers

    HDPE chambers HDPE inspection chambers are fabricated and installed to be used as a mechanism for monitoring the quality and composition of liquids deep below ground level. HDPE chambers are used to fabricate these ites due to the high corrosion resistsnce and structural strength of the material. Inspection chambers can be constructed in numerous sizes, depths and with various inlet/outlet arrangements depending on the design requirements of the...

  • Pipe Booths

    Pipe Booths

    Pipe boothPipe booths are fabricated around pipes which protrude through lining systems to provide a seal between the lining material and the pipe. Pipe booth can also be used to control odours in landfills which can generate and escape through a flowpath between the exterioir of gas well pipes and the surrounding soil. Pipe booths can be fabricated to any diameter required and can be welded to HDPE pipes to provide a full seal.