56 products found

Products

  • ALLCHEM

    Single-stage, single-flow chemical-standard Centrifugal Pump according to ISO 2858 and ISO 5199 for horizontal or vertical installation: This product series employs a clever modular system. By using a variety of materials and shaft seals, it is able to successfully handle most of the difficult pumping challenges encountered in the chemical and pharmaceutical industries.

  • ALLCLEAN

    Stainless steel Progressing Cavity Pumps (CIP) for high-value liquids; the ideal combination of high hygiene and economical cleaning. Food: chocolate, honey, marmalade, meat. Dairy products: milk and egg products, fruit concentrate. Pharmaceuticals: ointments, pastes, proteins, cosmetics. Chemicals: colors, resins, adhesives, dispersions, bio-diesel.

  • ALLCLEAN - Model Series ACNP - Progressing Cavity Pump

    ALLCLEAN - Model Series ACNP - Progressing Cavity Pump

    Progressing Cavity Pump in base plate design up to 12 bar. Pumped Liquid: Low to highly viscous liquids, pasty, neutral or aggressive, pure or abrasive, gaseous or tending to froth, also with fibrous and solids content.

  • ALLIFT

    High performance Screw Pumps for hydraulic lifts; for mineral oil-based hydraulic oils or synthetic hydraulic fluids and similar liquids: Very low noise level. Low maintenance wet installation. Large variety of pump units. For driving lifts (elevators), lifting platforms, stages and other hydraulic machines.

  • ALLUB

    Volute-housing Centrifugal Pumps and Screw Pumps for supplying lube oil; designed for vertical installation in oil reservoirs. Ideal for supplying lube oil and sealing oil to turbines, large compressors, and large gear sets; used in all branches of industry to pump lubricating, non-corrosive liquids without abrasive components.

  • ALLHEAT

    Centrifugal Pumps for high-temperature applications. Whether you need to move heat-transfer oils up to 350 °C, or hot water up to 207 °C, these versatile and universal pumps will offer the best possible technical solution at a very good price/performance ratio. The ALLHEAT design is also available in the space-saving 'block' and inline versions. These pump models eliminate problems associated with aligning the coupling by flanging the motor directly to the pump itself.

  • ALLMAG

    Volute-housing Centrifugal Pumps, with magnetic coupling, are hermetically sealed and come with a patented safety design. Chemicals and thermal oils. Environmentally hazardous, toxic, or volatile pumped liquids. Liquids with a high unpleasant odor potential.

  • ALLMARINE

    Centrifugal Pumps for marine and offshore applications: For pumping freshwater and ocean cooling water. As pumps for general service, boiler feeding, ballast, fire-fighting or lube oil.

  • ALLMARINE - Model Series NISM - Volute Casing Centrifugal Pump

    ALLMARINE - Model Series NISM - Volute Casing Centrifugal Pump

    Volute Casing Centrifugal Pump in in-line design up to PN 10. Pumped Liquid: Fresh water, sea water, condensate, oils, brines, lyes and more. The liquids to be pumped must not contain any abrasive particles nor chemically attack the construction materials of the pumps.

  • ALLMARINE - Model Series NIM - Volute Casing Centrifugal Pump

    ALLMARINE - Model Series NIM - Volute Casing Centrifugal Pump

    Volute Casing Centrifugal Pump in in-line design up to PN 10. Pumped Liquid: Fresh water, sea water, condensate, oils, brines, lyes and more. The liquids to be pumped must not contain any abrasive particles nor chemically attack the construction materials of the pumps.

  • ALLMARINE - Model Series NAM - Volute Casing Centrifugal Pump

    ALLMARINE - Model Series NAM - Volute Casing Centrifugal Pump

    Volute Casing Centrifugal Pump in block design up to PN 10. Pumped Liquid: Fresh water, sea water, condensate, oils, brines, lyes and more. The liquids to be pumped must not contain any abrasive particles nor chemically attack the construction materials of the pumps.

  • ALLMOVE

    Seal less and self-priming Peristaltic Pumps that are dry-running safe and ideal for highly aggressive and highly abrasive liquids; the most effective combination of high pumping accuracy and resistance to solids. Mining: sludges, excavated material, coal concrete. Ceramics and cement industry: slurry, screed, concrete recycling. Chemicals: aggressive acids and lyes. Paints and coatings industry: latex, pigments.

  • ALL-OPTIFLOW

    Applications include waste, wastewater treatment and paper manufacturing.

  • ALL-OPTIFLOW - Model AEB1F - Progressing Cavity Pump

    ALL-OPTIFLOW - Model AEB1F - Progressing Cavity Pump

    Progressing Cavity Pump in block design up to PN 16. Pumped Liquid: Low to highly viscous liquids, pasty, neutral or aggressive, pure or abrasive, gaseous or tending to froth, also with fibrous and solids content.

  • ALLPRO

    In chemical and process engineering, Propeller Pumps are used to move a variety of liquids. In wastewater and wastewater treatment technique, they are used for recirculation purposes and to pump return sludge or rainwater. Propeller Pumps, of the ALLPRO® series, are the right solution for all types of applications. They pump the right volume with the greatest possible efficiency.

  • ALLTRI

    Progressing Cavity Pumps with 2/3-lobed pumping elements. The 2/3-lobed pumping elements have significantly greater power density than pumps with 1/2-lobed pumping elements and generate about twice as much flow volume at the same speed. Self-priming, rotary displacement pump suitable for pumping: Low-viscosity or high-viscosity liquids. Neutral or aggressive liquids. Liquids containing gases. Liquids prone to foaming. Liquids with fibrous and solid particles.

  • ALLTRI - Model Series AE1L - Progressing Cavity Pump

    ALLTRI - Model Series AE1L - Progressing Cavity Pump

    Progressing Cavity Pump in base plate design up to PN 16. Pumped Liquid: Low to highly viscous liquids, pasty, neutral or aggressive, pure or abrasive, gaseous or tending to froth, also with fibrous and solids content.

  • ALLTRI - Model Series AEB1L - Progressing Cavity Pump

    ALLTRI - Model Series AEB1L - Progressing Cavity Pump

    Progressing Cavity Pump in block design up to PN 16. Pumped Liquid: Low to highly viscous liquids, pasty, neutral or aggressive, pure or abrasive, gaseous or tending to froth, also with fibrous and solids content.

  • ALLTRIMM

    ALLTRIMM is a patented inline propeller pump for freshwater, ocean water, and anti-heeling systems. It has reversible hydraulics and an integrated drive, which eliminates the need for costly valve controllers. An electric motor, integrated into the pump lobe, serves as the drive. This compact and space-saving pump set is designed for installation between two flanges in a pipe, which makes a foundation unnecessary. Inline propeller pump without foundation and valve controller. Integrated moto

  • EMTEC

    Modern production technology represents a real challenge. Ever greater precision with extremely tight tolerances forms the foundation of modern, innovative products. At the same time, expectations for cost-efficiency in production continue to grow. When you choose EMTEC screw pumps, you can confront these challenges with confidence. Precise, extremely quite and efficient, EMTEC pumps supply chipping processes with any type of cooling lubricant at high pressure and low pulsation, all while ex

  • TECFLOW

    TECFLOW Pumps are standard eccentric spiral pumps specially designed for wastewater and wastewater treatment technique. These pumps move liquids with fibrous and solid components of up to 10% dry substances. The new 2/3-lobed pumping elements have significantly greater power density than the 1/2-lobed pumping elements and generate about twice as much flow volume at the same speed.

  • TECFLOW - Progressing Cavity Pump

    TECFLOW - Progressing Cavity Pump

    Progressing Cavity Pump in block design up to PN 16. Pumped Liquid: Low to highly viscous liquids, pasty, neutral or aggressive, pure or abrasive, gaseous or tending to froth, also with fibrous and solids content.

  • MAGDRIVE

    Screw Pump with magnetic coupling. MAGDRIVE Pumps enable you to efficiently and reliably move all lubricating liquids. They work virtually noise-free and pulsation-free. Hardened spindles and optimally-configured complete pump sets ensure economical operation.

  • MAGDRIVE - Model Series AFM - Three-Screw Screw Pump

    MAGDRIVE - Model Series AFM - Three-Screw Screw Pump

    Three-screw screw pump with magnetic coupling for applications up to 40 bar. Pumped Liquid: For handling lubricating liquids with no abrasive substances, no chemical attack of pump materials, in particular heating oils, lube oils, hydraulic oils or other lubricating liquids.

  • TRILUB

    Low-pressure Screw Pumps for lubricating liquids. Whenever machines, motors, gear sets or turbines must be supplied with lubricating oil; when hydraulic units must have a certain oil pressure; when oil must be transferred in power plants, refineries and tank farms; or when industrial burners must be supplied with light or heavy fuel oil - triple-spindle, low-pressure Screw Pumps are right at home in all of these situations and many more.

  • TRILUB - Model Series TRD - Three-Screw Pump

    TRILUB - Model Series TRD - Three-Screw Pump

    Three-Screw pump for applications up to 16 bar. Pumped Liquid: For handling lubricating liquids with no abrasive substances, no chemical attack of pump materials, in particular lube oils, hydraulic oils and light fuel oils in all industrial fields of application.

  • TRILUB - Model Series TRE - Three-Screw Pump

    TRILUB - Model Series TRE - Three-Screw Pump

    Three-Screw pump for applications up to 16 bar. Pumped Liquid: For handling lubricating liquids with no abrasive substances, no chemical attack of pump materials, in particular lube oils, hydraulic oils and light fuel oils in all industrial fields of application.

  • TRILUB - Model Series TRL - Three-Screw Pump

    TRILUB - Model Series TRL - Three-Screw Pump

    Three-Screw pump for applications up to 16 bar. Pumped Liquid: For handling lubricating liquids with no abrasive substances, no chemical attack of pump materials, in particular lube oils, hydraulic oils and light fuel oils in all industrial fields of application.

  • TRILUB - Model Series TRF - Three-Screw Pump

    TRILUB - Model Series TRF - Three-Screw Pump

    Three-Screw pump for applications up to 16 bar. Pumped Liquid: For handling lubricating liquids with no abrasive substances, no chemical attack of pump materials, in particular lube oils, hydraulic oils and light fuel oils in all industrial fields of application.

  • TRILUB - Model Series TRQ - Three-Screw Pump

    TRILUB - Model Series TRQ - Three-Screw Pump

    Three-Screw pump for applications up to 16 bar. Pumped Liquid: For handling lubricating liquids without any abrasive components in particular lube oils, hydraulic oils and light fuel oils in all industrial fields of application. The pump liquids may not chemically attack the pump material.

  • TRITEC

    High performance Screw Pump. ALLWEILER's internal-bearing Screw Pumps make it the market leader in Europe. In addition to series production of standardized products, ALLWEILER also produces special versions that are adapted to the needs of specific customers and applications.

  • Others

  • ALLDUR - Use in Sewage Treatment Plants and for Pumping Abrasive Wastewater

    ALLDUR - Use in Sewage Treatment Plants and for Pumping Abrasive Wastewater

    ALLDUR was specially developed for use in sewage treatment plants and for pumping abrasive wastewater. New chemical composition of elastomer. Maximum resistance to mechanical influences. Highly elastic and exhibits high tensile strength. High tear-growth resistance. To be used across a wide temperature range. Available in all progressing cavity pumps. Staying in service for up to three times longer than other stators.

  • SMART Solutions

  • Model CM-1000 - Intelligent Pump Controller for Sea Water Cooling Systems

    Model CM-1000 - Intelligent Pump Controller for Sea Water Cooling Systems

    CM-1000 is an intelligent pump controller for sea water cooling systems. The system maximizes shipboard pumping efficiency while simultaneously lowering operating costs, maintenance costs, and downtime. Besides high efficient pump components this helps owners to achieve best TCO with help of Colfax Equipment.

  • ALLMIND - Intelligent Pump Monitoring and Control System

    ALLMIND - Intelligent Pump Monitoring and Control System

    Continuous diagnosis of the pump complements the capabilities of the ALLMIND system. The results are dramatically lower maintenance and energy costs, elevated safety, and optimized control when bringing the pump to the desired operating point.

  • ALLSEAL - Continuous Monitoring of the Mechanical Seal

    ALLSEAL - Continuous Monitoring of the Mechanical Seal

    ALLSEAL monitors your pump's mechanical seal. Continuous monitoring of the mechanical seal. Early detection of unusual leakage. Compliance with environmental regulations, higher safety, longer pump service life. New pumps or retrofit at any time.

  • Screw Pumps 1