Ambiente Y Tecnologia

86 products found

Products by mlu-recordum Environmental Monitoring Solutions GmbH

  • mlu-recordum

  • Recordum Airpointer - Compact Air Quality Monitoring System

    Recordum Airpointer - Compact Air Quality Monitoring System

    The airpointer‘s modular design comprising a base unit, analyzing modules and sensor modules allows for a configuration according to different application requirements. The airpointer‘s compact design enables it to be installed almost everywhere. Due to its optimized thermal management, the airpointer consumes less power compared to conventional monitoring stations.

  • airQrate - Multi-Gas Calibrator

    airQrate - Multi-Gas Calibrator

    The airQrate multi-gas calibrator provides accurate concentrations of calibration gases such as ozone, sulphur dioxide, nitrogen oxide, nitrogen dioxide, and other gases required. The airQrate generates gases for zero and span calibration. An automatic multi-point calibration is available as well. Calibrations may be performed in transfer mode or absolute mode. The modular design enables a user-defined calibrator configuration in relation to the...

  • airQlog - 19` Ambient Air Quality Monitoring Datalogger

    airQlog - 19` Ambient Air Quality Monitoring Datalogger

    airQlog 19“ Data Logger for Saving, Managing, and Displaying Data from Various Air Quality Monitors and Sensors airQlog – Saving, Managing, and Displaying Data from Various Air Quality Monitors and Sensors. The airQlog is an innovative system to collect and control data from various air quality sensors. Its key feature is the use of all modern Internet technology for providing data. airQlog 2. The data logger is easy to configure and use...

  • Waterpointer - Automated Water Quality Monitoring System

    Waterpointer - Automated Water Quality Monitoring System

    Fresh water – one of the world‘s most valuable resources. Of the nearly 1.4 billion km³ of water covering the earth, fresh water represents merely 2.6% or 36 million km³. About one third of this amount circulates reasonably quickly and is thus referred to as hydrological cycle. This may sound like a huge quantity but compared to the 146 million m³ of water consumed annually by, for example, the population of a metropolis...

  • Airpointer - Analysis Modules

  • Airpointer - Ozone (O3) Analysis Modules

    Airpointer - Ozone (O3) Analysis Modules

    Ozone (O3) is a highly toxic corrosive substance and a common pollutant. In low concentration it is a normal component of ambient air. Highly concentrated it is an aggressive irritant gas and at ground level it affects humans and nature.

  • Airpointer - Model ADS - Additional Sensors

    Airpointer - Model ADS - Additional Sensors

    Apart from the already installed modules the airpointer offers capabilities for implementing additional sensors and external instruments using the high performance airpointer data recording. These sensors are integrated via Ethernet, RS-232 or analog interfaces. Additional sensors are mounted outside or inside the airpointer depending on the space available.

  • Airpointer - Model BTX - Analysis Modules

    Airpointer - Model BTX - Analysis Modules

    Benzene is a clear, colorless, highly flammable and volatile, liquid aromatic hydrocarbon with a gasoline-like odor. Benzene is found in ambient air as a result of burning fuels, such as coal, petrol and wood. Toluene also known as methylbenzene, is a clear, water-insoluble liquid with the typical smell of paint thinners. It is an aromatic hydrocarbon that is widely used as an industrial feedstock and as a solvent.

Products by California Analytical Instruments, Inc. (CAI)

  • Chemiluminescence Analyzers (CLD)

  • Model 600 CLD - Chemiluminescence Analyzers

    Model 600 CLD - Chemiluminescence Analyzers

    The chemiluminescence method is used to measure the reaction between ozone and nitric oxide. In the NOx mode, the sample is routed through a converter. The resultant reaction is directly proportional to the total concentration of NOx. The reliability and rapid response time of CAI CLD analyzers make them particularly well-suited for the following applications:

  • Model 650 - Chemiluminescent NO/NOx & Paramagnetic Oxygen Analyzerr

    Model 650 - Chemiluminescent NO/NOx & Paramagnetic Oxygen Analyzerr

    The California Analytical Model 650 NOxygen NO/NOX/NO2/O2 digital analyzer is designed around a state-of-the-art 16 bit microprocessor, with 16 digital inputs, 16 digital outputs, 16 analog inputs and 4 analog outputs. The analyzer can be manually operated from the keypad or remotely via TCP/IP, RS-232C communications and discrete inputs. The analyzer display includes screen presentation of all analyzer alarms. Four levels of password protection are...

  • Model 600 HCLD - NO/NOx Chemiluminescent Analyzer

    Model 600 HCLD - NO/NOx Chemiluminescent Analyzer

    The California Analytical Instruments Model 600 HCLD NO/NOx digital analyzer is designed around a state-of-the-art 16-bit microprocessor. The 16 bit microprocessor control board consists of the MSR-Card with 16 digital inputs, 16 digital outputs, 16 analog inputs and 4 analog outputs. The analyzer can be manually operated from the keypad or remotely via TCP/ IP, RS-232C communications and discrete inputs. The analyzer display includes screen...

  • Non-Dispersive Infrared (NDIR) Analyzer

  • Model 600 Series - NDIR/Oxygen Multi-Component Analyzers

    Model 600 Series - NDIR/Oxygen Multi-Component Analyzers

    TheCAl Series 600 NDIR/02 analyzer is based on the infrared absorption characteristics of gases. Using a single infrared beam to measure gas concentrations, this analyzer delivers highly stable and reliable results. A single infrared light beam is modulated by a chopper system and passed through a sample cell of predetermined length containing the gas sample to be analyzed. As the beam passes through the cell, the sample gas absorbs some of its...

  • Model ZRE NDIR/O2 - NDIR Oxygen Analyzers

    Model ZRE NDIR/O2 - NDIR Oxygen Analyzers

    Cftl ZRE analyzers are based on the infrared absorption characteristics of gases. Using a single infrared beam to measure gas concentrations, ZRE analyzers deliver highly stable and reliable results. The infrared light beam is modulated by a chopper system and passed through a sample cell of predetermined length that contains the gas sample to be analyzed. As the beam passes through the cell, the sample gas absorbs some of its energy. The attenuated...

  • Oxygen Analyzers

  • Model 600P - Oxygen Analyzers

    Model 600P - Oxygen Analyzers

    CAI offers two dedicated analyzer models to measure Oxygen in a sample. The 600P uses paramagnetic technology and the 600F uses a fuel cell method to determine the percentage level of oxygen contained in a gas sample.

  • Fourier Transform Infrared Analyzer (FTIR)

  • Model 600 Series - Fourier Transform Infrared Analyzer

    Model 600 Series - Fourier Transform Infrared Analyzer

    The California Analytical Instruments Series 600 FTIR provides fast, continuous and stable analysis of virtually any gas which has an infrared absorption spectrum. The proprietary heated sample cell allows the instrument to accommodate hot samples containing high levels of moisture. The 600 Series FTIR can simultaneously measure, display and output multiple gases to serve a variety of applications including diesel emissions, CEM monitoring, ammonia...

  • Model 600 SC FTIR - Fourier Transform Infrared Analyzer

    Model 600 SC FTIR - Fourier Transform Infrared Analyzer

    The California Analytical Instruments 600 SO FIR Analyzer provides fast; continuous and stable analysis of virtually any gas that has an infrared absorption spectrum. The proprietary sample cell enables the instrument to accommodate hot samples containing high levels of moisture. The 600 SC FTIR can serve a variety of analytical applications, including diesel emissions, OEM monitoring, ammonia slip, SCR inlet/outlet monitoring, process monitoring and...

  • Model 700 FTIR - Fourier Transform Infrared Analyzer

    Model 700 FTIR - Fourier Transform Infrared Analyzer

    The California Analytical Instruments 700 FTIR Analyzer provides fast; continuous and stable analysis of virtually any gas that has an infrared absorption spectrum. The proprietary heated sample cell enables the instrument to accommodate hot samples containing high levels of moisture. The 700 FIR can serve a variety of analytical applications, including diesel emissions, OEM monitoring, ammonia slip, SCR inlet/outlet monitoring, process monitoring and...

  • Model 700 FTIR - Heated Sampler

    Model 700 FTIR - Heated Sampler

    Provides temperature-control circuits for oven, pump, internal heated sample line (up to 10 ft. between sampler and analyzer) and heated jacket(entry to analyzer). Ensures that critical components are heated to 191 °C

  • Flame Ionization Detection Analyzers (FID)

    The analyzer utilizes the principle of Flame Ionization Detection method to determine the THC, CH4 and NMHC within a gaseous sample. A gaseous sample becomes ionized in the flame and the electrostatic field causes the charged particles to migrate. The migration creates a small current. This current is measured by the amplifier and is directly proportional to the hydrocarbon concentration in the sample.

  • CAI - Model 600 Series - FID Hydrocarbon Analyzer

    CAI - Model 600 Series - FID Hydrocarbon Analyzer

    The California Analytical Instruments Model 600 FID Analyzers are designed to continuously measure the total concentration of hydrocarbons within a gaseous sample. The analyzers exhibit superior sensitivity and response time. The gaseous sample can be exhaust gases from an internal combustion engine, a combustion process or VOC abatement systems.

  • CAI  - Model 600 Series  - HFID Hydrocarbon Analyzer

    CAI - Model 600 Series - HFID Hydrocarbon Analyzer

    The California Analytical Instruments Model 600 HFID Analyzers are designed to continuously measure the total concentration of hydrocarbons within a gaseous sample. The analyzers exhibit superior sensitivity and response time. The gaseous sample can be exhaust gases from an internal combustion engine, a combustion process or VOC abatement systems. The instrument can measure THC in the ppm or percent levels. All internal components are maintained at...

  • Model CAI 600 Series - M-HFID Total Hydrocarbon/Methane/Non-Methane Hydrocarbon Analyzer

    Model CAI 600 Series - M-HFID Total Hydrocarbon/Methane/Non-Methane Hydrocarbon Analyzer

    The California Analytical Instruments’ Model 600 MHFID Analyzer is designed to continuously measure the total concentration of hydrocarbons or methane within a gaseous sample. The analyzers exhibit superior sensitivity and response time. The gaseous sample can be exhaust gases from an internal combustion engine, a combustion process or VOC abatement systems. The instrument can measure THC or CH4 in the ppm or percent levels. All internal...

  • UV Fluorescence Analyzers

    This method is based on the fluorescence of SO2 due to absorption of ultraviolet (UV) energy. A UV lamp emits ultraviolet radiation that passes through a filter which excites the SO2 molecules and produce slight which is measured by a photomultiplier tube (PMT).

  • 600 Series UV SO2 Analyzer

    600 Series UV SO2 Analyzer

    The California Analytical Series 600 digital analyzer product line is designed around a state of the art 16 bit microprocessor, with 16 digital inputs, 16 digital outputs, 16 analog inputs and 4 analog outputs. The analyzer can be manually operated from the keypad or remotely via TCP/IP, RS-232 communications and discrete inputs. The analyzer display includes screen presentation of all analyzer alarms. Four levels of password protection are provided....

  • Specialty Products

    CAI supplies peripheral equipment for enhanced sample handling and cost saving products.

  • ZAG-6L Zero Air Generator

    ZAG-6L Zero Air Generator

    The California Analytical Model ZAG-6L has been designed to operate continuously 24hours/ day, 7 days/week to provide a pure air source of “zero air” for use in analytical gas analysis equipment. The ZAG-6L completely eliminates the inconvenience and high costs of precision blended zero air cylinders. This is particularly important with instrumentation which, in addition to zero calibration air, requires pure air for burner combustion...

  • Model Pump Pak II

    Model Pump Pak II

    The CAI Pump Pak II was designed to provide analyzers without internal sample pumps with a means of delivering sample for analysis.

  • Model 101 - Heated Sample Diluter

    Model 101 - Heated Sample Diluter

    The CAI Model 101 Heated Sample Diluter is designed to precisely dilute samples of high concentrations of analytes and/or humidity. The Diluter has an internal heated sample pump and temperature adjustable oven. All components in contact with the sample are maintained at the set oven temperature preventing condensation. Dry air is mixed with the sample to the required dilution ratio insuring no condensate will be introduced into the analyzer.

  • Model 600 SGD - Gas Divider

    Model 600 SGD - Gas Divider

    The Model 600 SGD will allow a master calibration gas to be diluted by up to 63 points with and dilute gas. Savings in master gas cylinders and automatic operation will provide a cost effective solution to large inventories of cylinders. The internal microprocessor offers different levels of access with code protected user levels to protect from unauthorized changes of internal parameters. The internal gas list is used to store various gases and user...

  • Mark 3 Sampling System

    Mark 3 Sampling System

    The California Analytical Instruments Mark 3 Intelligent Sampling System is a third generation single board computer controlled industrial sequencer. The system has been developed over many years as higher specifications components have been added to the proven single board computers on the Mark 1 and Mark 2 Samplers. These have been in production for over 15 years. CAI specialize in custom building these systems and are able to modify and write special...

  • Integrated Systems

    CAI manufactures complete analysis systems for a  wide range of applications within many industries.

  • 600 Series NOxBox

    600 Series NOxBox

    The California Analytical Instruments’ NOxBox system has been specifically designed for harsh environment conditions frequently found in outdoor selective catalytic reactor applications. The analyzer system is housed in a Nema 4 enclosure with a front lockable door. The enclosure contains a heating and cooling system to maintain a constant internal temperature for the gas analyzer and interface equipment regardless of outside environmental...

  • Boiler Monitoring Systems

    Boiler Monitoring Systems

    Climate controlled NEMA Enclosure. Gases Available are CO, CO2, O2, NOX, HC. Utilizes Infrared, Chemiluminescent, FID and Paramagnetic Technologies. Sample Conditioning System Provides Clean, Dry Sample Gas Stream to Analyzers. Sample Probe With Heated Filter and Blowback. Withstands Sample Temperatures of up to 600 degrees F.

  • 600 LFG CH4/02 Land Fill Gas Analysis System

    600 LFG CH4/02 Land Fill Gas Analysis System

    Methane and Oxygen analyzer is housed in a climate controlled NEMA 4 or 4X enclosure approximately 48” H X 36” W X 16” D. The enclosure includes fittings for calibration gases, sample gas, and exhaust, solenoid valves for automatic calibration of each gas, inlet pressure regulator, flow meter with needle valve, particulate filter, and back pressure regulator assembly. Optional CO2 channel, water removal system, and sample pump are...

  • Mobile Source Emissions (Roll Around Emissions Cart)

    Mobile Source Emissions (Roll Around Emissions Cart)

    The California Analytical Emissions Cart has been designed to provide a compact, self-contained emissions system. The complete system is contained in a single bay, roll around cabinet that may be moved to various test sites as required. This system will allow direct measurement of carbon monoxide, carbon dioxide, oxygen, total hydrocarbons and oxides of nitrogen using proven research grade gas analyzers. All analyzers are Federal Register compliant ,...

  • Photoacoustic IR Analyzers

    In Photoacoustic Spectroscopy (PAS) the gas to be measured is irradiated by modulated light of a pre-selected wavelength. The gas molecules absorb some of the light energy and convert it into an acoustic signal which is detected by a microphone.

  • 1314/1412 Photoacoustic Analyzer

    1314/1412 Photoacoustic Analyzer

    The Innova Photoacoustic gas analyzers are highly accurate, reliable, and stable. Two versions of the analyzer are offered, the Model 1412 which is configured for bench top operation and the Model 1314 which is configured for rack mounted operation. The measurement system is based on photoacoustic Infrared detection and provides the capability of measuring virtually any gas that absorbs in the infrared spectrum. Gas selectivity is achieved through the...

Products by Optical Scientific Inc. (OSi)

  • New Products

  • OSi - Model WSS-300-DS - Tunnel Wind Speed Sensor and Smoke Sensor

    OSi - Model WSS-300-DS - Tunnel Wind Speed Sensor and Smoke Sensor

    OSi's patented Wind Speed and Smoke Sensor (WSS™) makes drift free air flow measurements across the tunnel, calculates true average wind speed, and detects smoke. The WSS-300-DS model is equipped with Automatic Gain Control (AGC) to compensate for variations in opacity caused by particulate matter, smoke, or moisture suspended in tunnel. The WSS-300-DS uses OSi patented optical scintillation technology. The optical scintillation technique relies...

  • OSi - Model OWV-300 - Optical Wind and Visibility Sensor

    OSi - Model OWV-300 - Optical Wind and Visibility Sensor

    OSi’s Optical Wind and Visibility sensor (OWV) is a breakthrough in measuring clear air turbulence, large body air / wind movement and atmospheric visibility over a long path (50 to 200 meters) – all in a single, low cost sensor. The sensor operates on a combination of long path optical extinction and optical scintillation. All the electronics are housed in the OWV with a folded path being established by placing a...

  • OSi - Model LLM-100 - Laser Level Meter

    OSi - Model LLM-100 - Laser Level Meter

    OSI's patented Laser Level Meter (LLM) is a compact industrial sensor that utilizes an infrared laser and advanced micro-processor to measure levels in in industrial storage tanks, large commercial process bins and agricultural silos. The LLM-100 uses an eye safe pulsed infrared laser and measures distance using time of flight of a very narrow laser pulse. The sensor uses a very sensitive Avalanche Photodiode, which is coated with a bandpass filter to...

  • OSi - Model OWI-430-RH - Present Weather Sensor

    OSi - Model OWI-430-RH - Present Weather Sensor

    Our WIVIS intelligent algorithms are derived from study of 100’s of millions of hours of real - time data. With the -RH option, OWI-430 now integrates relative humidity measurement into this advanced weather identification system, resulting in: enhanced discrimination of fog from dust/smoke, more precise haze and mist reporting, increased accuracy in precipitation measurements, elimination of false positive readings.

  • OSI - Model APG-815-DS - All - Precipitation Sensor

    OSI - Model APG-815-DS - All - Precipitation Sensor

    APG-815-DS measures rain and snow and applies algorithms to automatically determine the precipitation type, rate, and water equivalent accumulation. The APG-815-DS is vastly superior to traditional type sensors and offers the reliability and proven performance you need!

  • OSI - Model OFS 2000R - Optical Flow Sensor - for Steam Lines

    OSI - Model OFS 2000R - Optical Flow Sensor - for Steam Lines

    OSI has expanded OFS technology from simple air/gas flow to include measurement of industrial steam lines! The OFS-2000R utilizes the extended range of our “F” model and uses AGC to optimize the amount of light based on the level of steam in the line. Measurement is not dependent on differential pressure, design DP, beta ratio, temperature, gas composition, humidity or the speed of sound.

  • Weather Sensors

    Our original research resulted in a series of weather sensors with unprecedented accuracy and reliability. In the years following we have refined and enhanced our analysis techniques. Combined with added features and improved electronics, our weather sensors now offer the most value for you - ever.

  • OSi - Model OWI-430 DSP-WIVIS - Present Weather and Visibility Sensor

    OSi - Model OWI-430 DSP-WIVIS - Present Weather and Visibility Sensor

    The OWI-430 DSP-WIVIS™ is the most advanced present weather and visibility sensor ever made. The fully automated instrument provides accurate visibility, present weather and precipitation measurement in a single sensor. This next generation intelligent sensor uses all digital signal processing (DSP) for no-drift high-accuracy results. OSi's patented environmentally adaptive algorithms use artificial-intelligence technology derived from over 100...

  • OSi - Model HazMET-100 - Portable Automated Weather Station

    OSi - Model HazMET-100 - Portable Automated Weather Station

    The HazMET100 Portable AWS is an advanced, Portable Automated Weather Station built around the 2100-138 Multi-parameter Meteorological Sensor. The low power requirements of the HazMET100 AWS make it well suited for portable battery and solar powered applications. The system has been designed from the ground up for fast setup anywhere.

  • OSi - Model VIS-430-DS - Visibility Sensor

    OSi - Model VIS-430-DS - Visibility Sensor

    The OSi VIS-430-DS is a state-of-the-art triple aperture forward scatter visibility sensor. Unlike traditional two-headed visibility sensor designs the VIS-430 does not require periodic field calibration. This results in tremendous time savings and ease of use.

  • OSi - Model ORG-815-DS - Optical Rain Gauge

    OSi - Model ORG-815-DS - Optical Rain Gauge

    OSi’s ORG (Optical Rain Gauge) is a superior tool for rain measurement. The ORG is the only instrument available to measure true rain rate. This means you avoid the reading errors due to mechanical limitations, which plague other low-tech gauges. No other rain sensor comes close to the ORG in performance and features. Our scintillation technology has undisputed advantages over the competition.

  • OSi - Model LOA-005 - Wind Speed and Air Turbulence Sensor

    OSi - Model LOA-005 - Wind Speed and Air Turbulence Sensor

    The Long-baseline Optical Anemometer (LOA) measures path averaged crosswind and turbulence over distances of 100 meters to over 10 km. Based on optical scintillation technology, its optics ‘see’ the always present temperature and density variation in small parcels of air as they move through the infrared beam. For applications where wind field direction is also needed, two systems can be setup in an “X” pattern. By surrounding...

  • Automated Weather Observation Systems (AWOS)

  • OSI - FAA-Certified Automated Weather Observation Systems (AWOS AV)

    OSI - FAA-Certified Automated Weather Observation Systems (AWOS AV)

    The OSI AWOS AV™ system is a fully automated aviation weather observing and reporting system designed to support airborne and ground users. This FAA-certfied AWOS is equipped with dual-pressure sensors and visibility sensors for determining official altimeter settings, visibility, and reporting via FCC-licensed UHF data radio, Internet, land line or cell phones.

  • OSi - Model AWS-432 - Modular Automated Weather Observation Systems (MAWOS)

    OSi - Model AWS-432 - Modular Automated Weather Observation Systems (MAWOS)

    After almost thirty years of developing weather sensors - we now offer complete integrated weather stations. Long a favorite with NWS, WMO, system integrators and meteorological departments around the world, OSI’s OWI-432 optical present weather & visibility sensor is now a key sensor in our Modular Automated Weather Observation Systems.

  • Model OFS-2000 Series - Optical Flow Sensor

    In 1999 we took the optical tracking techniques developed from the LOA Long-baseline Optical Anemometer, and applied them on a smaller scale. Result: the most accurate air flow sensor ever - the OFS 2000. Originally designed for industry to assist measurement of greenhouse gas emissions, further refinements have proven their use in process control, flare stack monitoring, tunnel vents, combustion control - and more. OFS-2000 series sensors meet EPA 40 Parts 60 & 75 and are in service in

  • OSi - Model OFS 2000W - Emissions Air Flow Sensor

    OSi - Model OFS 2000W - Emissions Air Flow Sensor

    OSi's patented Optical Flow Sensor (OFS) makes drift-free measurements across the entire stack, duct or pipe diameter and calculates a true average flow reading. The OFS 2000-W model is equipped with Automatic Gain Control (AGC) to compensate for variations in opacity caused by particulate matter or moisture carried in the stack flow. The OFS uses our EPA Method 14 approved optical scintillation technology. The optical scintillation technique relies...

  • OSi - Model OFS-2000F - Flare Stack Flow Sensor

    OSi - Model OFS-2000F - Flare Stack Flow Sensor

    OFS 2000 measures optical scintillation across the entire distance between the transmitter and receiver. It is the only flow sensor that gives a true non-contacting complete cross-stack flow measurement. OSI’s patented optical scintillation measurement algorithm uses advanced Digital Signal Processing (DSP) to measure the movement found in a gaseous flow stream, providing highly accurate, measurements.

  • OSi - Model OFS-2000 - Combustion and Emissions Air Flow Sensor

    OSi - Model OFS-2000 - Combustion and Emissions Air Flow Sensor

    OSI's patented Optical Flow Sensor (OFS) makes drift-free measurements across the entire stack, duct or pipe diameter and calculates an accurate average flow reading. It is the only flow sensor that gives a true non-contacting cross-stack flow measurement of the process. The OFS uses our EPA Method 14 approved optical scintillation technology. The optical scintillation technique relies on advanced Digital Signal Processing (DSP) electronics to 'see' and...

  • OSi - Model LOA-105 - Long-Baseline Optical Anemometer for Aluminum Smelters

    OSi - Model LOA-105 - Long-Baseline Optical Anemometer for Aluminum Smelters

    LOA-105 Optical Anemometer for Aluminum Plants is specially designed for superior performance in tough pot room environments. The sensor uses proven optical technology to measure the airflow velocity through the roof vents. The eye-safe LED transmitter and twin photodiode receiver are placed at either end of the pot room and simply need to 'look' through the HF flow to measure the airflow. Its maximum path length of 3 km allows the LOA to handle the...

Products by Tethys Instruments SAS

  • Tethys Instruments - Online Water Analyzers

  • Tethys Instruments - Model UV500 - Online Water Analyzer

    Tethys Instruments - Model UV500 - Online Water Analyzer

    The UV500 is a on-line water analyser based on a high resolution UV-visible spectrograph. It allows to monitor simultaneously many different parameters for waste water treatment plants or river monitoring stations with an excellent stability and low operating cost. The same spectrograph can measure organic matter, nitrate, colour, turbidity, phosphate, ammonia and hydrogen sulphide. A complementary UV-visible fluorescence module allows the measurement...

  • Tethys Instruments - Model UV500-Compact - Online Water Analyser

    Tethys Instruments - Model UV500-Compact - Online Water Analyser

    The UV500-Compact is a on-line water analyser based on a high resolution UV-visible spectrograph. It allows to monitor simultaneously many different parameters for waste water treatment plants or river monitoring stations with an excellent stability and low operating cost. The same spectrograph can measure organic matter, nitrate, colour, turbidity and phosphate. A complementary UV-visible fluorescence module allows the measurement of...

  • Tethys Instruments - Model UV400 - Online Water Analyzer

    Tethys Instruments - Model UV400 - Online Water Analyzer

    The UV400, based on a modular concept, allows to monitor simultaneously many different parameters for waste water or drinking water treatment plants as well as river monitoring stations. Each parameter corresponds to a specific optical module that can be selected by the user while ordering the analyser, depending on the application. Mainly based on UV spectroscopy, well known for its stability and low operating cost, the UV400 can measure parameters...

  • Tethys Instruments - Model UV300 - Online Water Analyser

    Tethys Instruments - Model UV300 - Online Water Analyser

    The UV300 is a cost effective water analyser for applications focused on one or two parameters. Mainly based on UV spectroscopy, well known for its stability and low operating cost, the UV300 can measure parameters like organic matter, nitrate, colour, aromatics hydrocarbons (PAH). Complementary modules allows the measurement of PO4, Cl2, NO2, Fe, Al by colorimetric method and turbidity by laser diode. External probes can be added for physicochemical...

  • Tethys Instruments - Model UV300-5D - Online Drinking Water Analyzer

    Tethys Instruments - Model UV300-5D - Online Drinking Water Analyzer

    The UV300-5D is a pre-defined configuration of the UV300 analyser dedicated to drinking water monitoring. It offers the possibility to monitor simultaneously FIVE parameters : (1) Total residual chlorine (2) Turbidity (3) pH (4) Conductivity (5) Temperature All this is done by a single unit that allows high performance measurements at a cost effective price. An automatic cleaning system maintains clean the flow cell and also make an...

  • Tethys Instruments - Model EL300 - Multi-Channel Water Controller

    Tethys Instruments - Model EL300 - Multi-Channel Water Controller

    The EL300 is a universal water controller based on a modular concept. The EL300 can adapt to many different probes and configurations, mono or multi-channel. It allows the connection of one or several probes for each parameter among pH, ORP, dissolved oxygen, conductivity, chlorine, total suspended solid (TSS), total dissolved solid (TDS), temperature and turbidity in the limit of 16 channels. A very user-friendly interface can display...

  • Tethys Instruments - Model UV400 ATEX - Online Water Analyzer for Ex Area

    Tethys Instruments - Model UV400 ATEX - Online Water Analyzer for Ex Area

    The UV400 ATEX, based on a modular concept, allows to monitor one or several parameters for process water, cooling water or waste water. The special enclosure and air purge system allows to use it on hazardous areas classified 'Ex' like refineries and chemical plants. Mainly based on UV spectroscopy, well known for its stability and low operating cost, the UV400 ATEX can measure parameters like aromatics hydrocarbons (PAH), hydrogen sulphide, organic...

  • Tethys Instruments - Model EL200 - Mono & Multi-Channel Water Controller

    Tethys Instruments - Model EL200 - Mono & Multi-Channel Water Controller

    The EL200 is a configurable water controller that can adapt to many different probes and configurations, mono or multi-channel, among pH, ORP, dissolved oxygen, conductivity, chlorine, turbidity, total suspended solid (TSS) and temperature. A user-friendly interface can display all the values as well as graphs of the recorded measurements over the last 24 hours. A USB port allows to transfer the recorded measurement that may be imported...

  • Probes

  • Tethys Instruments - General Purpose PH Sensor Probes

    Tethys Instruments - General Purpose PH Sensor Probes

    Tethys General Purpose pH Sensor with ¾”NPT thread on both front & back is a heavy-duty pH probe with Ryton body suitable for many industrial water application. Mounting thread on both front and back allow for in-pipe (continuous measurement) or submersible installations of pH Sensor. This pH sensor offers excellent chemical and impact resistance.

  • Tethys Instruments - PH SENSOR Differential Probe

    Tethys Instruments - PH SENSOR Differential Probe

    Tethys Differential pH Sensor with 1 ½”NPT thread on both front & back is a heavy-duty pH probe with Ryton Polyphenylene Sulfide body suitable for many industrial water application. The differential design provides unsurpassed accuracy by virtually eliminating ground loops. Mounting thread on both front and back allow for in-pipe (continuous measurement) or submersible installations of pH Sensor. You can replace the salt bridge and...

  • Tethys Instruments - ORP Sensor Probe

    Tethys Instruments - ORP Sensor Probe

    Tethys General Purpose ORP Sensor with ¾”NPT thread on both front & back is a heavy-duty ORP probe with Ryton body suitable for many industrial water applications. Mounting thread on both front and back allow for in-pipe (continuous measurement) or submersible installations of ORP Sensor. This ORP sensor offers excellent chemical and impact resistance.

  • Tethys Instruments - Dissolved Oxygen Probe

    Tethys Instruments - Dissolved Oxygen Probe

    Tethys Process Optical DO Probe is based on proven Luminescent Optical Technology suitable for most industrial application. It provides full featured performance, replaceable sensor caps, and long life. Mounting thread on both front and back allow for in-pipe (continuous measurement) or submersible installations of DO probe. Optical DO probe is suitable for measurement of dissolved oxygen measurement in various water and waste water application.

  • Tethys Instruments - Dissolved Oxygen Probe Auto Cleaning

    Tethys Instruments - Dissolved Oxygen Probe Auto Cleaning

    Tethys Process Optical DO Probe is based on proven Fluorescence Optical Technology suitable for most industrial application. It is rugged, without replacement sensor cap and having auto-cleaning feature. It is designed for submersible mounting in open basin. Optical DO probe is suitable for measurement of dissolved oxygen measurement in various water and waste water application.

  • Tethys Instruments - Total Suspended Solids Probe

    Tethys Instruments - Total Suspended Solids Probe

    Tethys Total Suspended Solid (TSS) Probe operate on the principle of single gap light absorption as a means of detecting the presence of suspended solids. The sensors incorporate self-cleaning optics via air or water jet. The application involves measurement of total suspended solids concentration from Mixed Liquor Suspended Solid (MLSS), Return Activated Sludge (RAS), Waste Activated Sludge (WAS), clarifier effluent and plant effluent.

  • Tethys Instruments - Turbidity Sensor Probe

    Tethys Instruments - Turbidity Sensor Probe

    Tethys Turbidity probes are based on Nephelometric Method (ISO 7027 – EN 27027). A light beam is sent to the sample through an optical lens. The 90 degree scattered light by suspended particle is collected by the probe through a second lens and it is converted in an electric signal proportional to the turbidity of the sample. The probe uses an infrared light and the measuring is not affected by the color of the sample. They are suitable for...

  • Tethys Instruments - Chlorine Sensor Probe

    Tethys Instruments - Chlorine Sensor Probe

    Tethys Chlorine Sensor is based on proven amperometric measurement technology. It is factory calibrated and zero calibration is not required. It’s long life membrane cap is replaceable with refillable gel electrolyte. It is suitable for measurement of residual chlorine (free or total) in various Industrial water and waste water application.

  • Tethys Instruments - Conductivity Probe

    Tethys Instruments - Conductivity Probe

    Tethys Conductivity Sensor with ¾”NPT thread is a heavy-duty probe with Polypropylene body suitable for many industrial water application. Mounting thread allow for in-pipe (flow through) installations of conductivity sensor. These conductivity sensor offers excellent chemical and impact resistance.

  • Online Gas Analysers

  • Tethys Instruments - Model CEM500 - Online Gas Analyser

    Tethys Instruments - Model CEM500 - Online Gas Analyser

    The CEM500 is an extractive online gas analyser dedicated to Continuous Emission Monitoring. This new model is based on a 2048 pixels CCD (charge-coupled device) giving a higher resolution (0.1 nm) and a longer lamp life time (3 years) It is based on UV spectroscopy that brings a higher sensitivity than infra-red and gives the possibility to measure several gases simultaneously. A high selectivity is achieved by a fast Fourier transform (FFT) on the...

  • Tethys Instruments - Model CEM500-L - Online Gas Analyser

    Tethys Instruments - Model CEM500-L - Online Gas Analyser

    The CEM500-L is an extractive online gas analyser for Continuous emission monitoring (CEMS). It is specifically dedicated to the new low level emission Regulations known as 50/30/5/3 (50 mg/Nm3 NOx, 30 mg/Nm3 SO2, 5 mg/Nm3 particles, 5 μg/Nm3 mercury) and also to chemical processes requiring low values of H2S. This new model is based on a multi-path flow cell of 1200 mm coupled to a high resolution spectrograph (0.1 nm) using an ultra-sensitive...

  • Tethys Instruments - Model CEM400 - Online Gas Analyser

    Tethys Instruments - Model CEM400 - Online Gas Analyser

    The CEM400 is an extractive online gas analyser dedicated to Continuous Emission Monitoring. It is based on UV spectroscopy that brings a higher sensitivity than infra-red and gives the possibility to measure several gases simultaneously. A high selectivity is achieved by a fast Fourier transform (FFT) on the absorbance spectrum for all the gases having a periodic structure like NH3, SO2, NO and some others. All the internal gas circuit...

  • Tethys Instruments - Model EXM500 - Online Gas Analysers

    Tethys Instruments - Model EXM500 - Online Gas Analysers

    The EXM 500 is an extractive on-line gas analyser dedicated to continuous emission monitoring (CEM). This new model is based on a 2048 pixels CCD (charge-coupled device) giving a higher resolution (0.1 nm) and a longer lamp life time (3 years). It is based on UV spectroscopy that brings a higher sensitivity than infra-red and gives the possibility to measure several gases simultaneously. A high selectivity is achieved by a fast Fourier transform (FFT)...

  • Tethys Instruments - Model EXM500-L - Online Gas Analyser

    Tethys Instruments - Model EXM500-L - Online Gas Analyser

    The EXM500-L is an extractive online gas analyser for Continuous emission monitoring (CEMS). It is specifically dedicated to the new low level emission Regulations known as 50/30/5/3 (50 mg/Nm3 NOx, 30 mg/Nm3 SO2, 5 mg/Nm3 particles, 5 μg/Nm3 mercury) anda lso to chemical processes requiring low values of H2S. This new model is based on a multi-path flow cell of 1200 mm coupled to a high resolution spectrograph (0.1 nm) using an ultra-sensitive...

  • Tethys Instruments - Model EXM400 - On-Line Gas Analysers

    Tethys Instruments - Model EXM400 - On-Line Gas Analysers

    The EXM400 is an extractive online gas analyser dedicated to Continuous Emission Monitoring. It is based on UV spectroscopy that brings a higher sensitivity than infra-red and gives the possibility to measure several gases simultaneously. A high selectivity is achieved by a fast Fourier transform (FFT) on the absorbance spectrum for all the gases having a periodic structure like NH3, SO2, NO and others. All the internal gas circuit is heated at...

  • Tethys Instruments - Ammonia Analyzers (Gas and Water)

  • Model EXM400, CEM400, CEM500, UV400, UV500 - Ammonia Analyzers

    Model EXM400, CEM400, CEM500, UV400, UV500 - Ammonia Analyzers

    Ammonia Analyzers. Tethys Instruments is the specialist of ammonia measurement in gas phase or in water phase by UV spectroscopy with more than 20 years of experience. For gas phase, EXM400, CEM400 and CEM500 ammonia analyzers cover DeNOx applications and special process applications. For water phase, applications concerns mainly industrial and municipal waste water treatment plants that are covered by the UV400 and UV500 models.

Products by Cooper Environmental Services

  • Ambient Continuous Metals Monitor

    Although particulate matter (PM) is listed as a criteria pollutant by the US EPA, PM measurements alone do not tell the whole story. Multiple studies show that PM-toxicity can vary drastically due to the presence of toxic metals and provide direct links between airborne particulate metals and adverse health effects. Cooper's Xact™ Ambient Metals Monitor provides the necessary PM speciation to accurately assess the presence of toxic metals for protection of human health and the environm

  • CES Xact - Model 625i - Ambient/Fence-Line Multi-Metals Monitor (AMM)

    CES Xact - Model 625i - Ambient/Fence-Line Multi-Metals Monitor (AMM)

    Cooper Environmental’s Xact 625i is designed for high time resolution multi-metals monitoring of ambient air, with detection limits that rival those of laboratory analysis. The Xact 625i comes standard with a solid-state meteorological sensor and Cooper Environmental’s proprietary ADAPT analysis package, making the instrument one of the most powerful air pollution source detection offerings in the industry.

  • CES - Automated Data Analysis Plotting Toolset (ADAPT)

    CES - Automated Data Analysis Plotting Toolset (ADAPT)

    The Xact® 625i continuously generates large amounts of high quality metals data.  Offline analysis of such datasets can be time and resource intensive process for the environmental agencies.  Cooper Environmental is offering a hardware-software package, Automated Data Analysis Plotting Toolset (ADAPT), to manage and analyze Xact® 625i measured metals in real-time through a number of relevant graphical tools.

  • Multi-Metals Continuous Emissions Monitor

    CEMS stack monitors typically require frequent calibration and tuning, while providing limited monitoring data. Cooper Environmental's Xact CEMS provides accurate measurement for both particulate and vapor-phase Hg, while simultaneously providing measurements for other hazardous metals, such as lead and arsenic. In addition, the Xact CEMS does not require frequent calibration. In some cases, the additional elemental measurements can be used to optimize a stack’s scrubber system, hence

  • CES Xact - Model 640 - Multi-Metals Continuous Emissions Monitoring System (CEMS)

    CES Xact - Model 640 - Multi-Metals Continuous Emissions Monitoring System (CEMS)

    CES’Xact 640 system uses reel-to-reel (RTR) filter tape sampling and nondestructive X-ray fluorescence (XRF) analysis to monitor stack metal emissions. An isokinetic sub-sample of stack gas is taken from the stilling chamber and drawn through a chemically reactive filter tape. Vapor phase metals, including mercury (Hg), are deposited along with the particulate matter (PM) on the filter tape.

  • CES Xact - Model 645 - Continuous Mercury Monitor (CEMs)

    CES Xact - Model 645 - Continuous Mercury Monitor (CEMs)

    Cooper Environmental’s Xact 645 continuous mercury (Hg) monitor collects and analyzes emission samples for mercury, which can be measured simultaneously using patented reactive filter technology and nondestructive X-ray fluorescence (XRF). A sample of gas is extracted from a source, diluted, and drawn through a chemically reactive filter tape. Vapor phase mercury is deposited along with particulate-phase metals on the filter tape. The...

  • Continuous Metals Water Monitor

  • Other

  • CES - PTFE Filter Tape

    CES - PTFE Filter Tape

    Cooper Environmental’s success in measuring low concentrations of metallic elements is dependent on using the highest quality PTFE filter tape possible. Our filter tape has extremely low contamination levels combined with very high flow capability, resulting in a very high quality ambient measurement filter.

  • CES - Model QAG™ 825 - Multi-Metal Quantitative Aerosol Generator

    CES - Model QAG™ 825 - Multi-Metal Quantitative Aerosol Generator

    The QAG creates an aerosol of known concentration by nebulizing a solution. The resulting droplets are carried out of the generation area to a drying chamber where they are dried to particles. The aerosol exiting the drying chamber contains known concentrations of analytes calculated from the QAG’s input parameters. The reference aerosol produced by the QAG is traceable-to-NIST standards and can be used to challenge and evaluate the accuracy,...