125 products found

products

  • Fixed Spot Non-Contact Thermometers / Pyrometers

    Our extensive range of infrared thermometers provides online temperature measurements and control. Innovative, flexible solutions customisable for diverse processes and specialised applications.

  • Model SPOT AL EQS - Aluminium Extrusion, Quench and Strip

    Model SPOT AL EQS - Aluminium Extrusion, Quench and Strip

    An advanced non-contact infrared pyrometer providing a single sensor solution for aluminium extrusion press exit, quench and strip applications. A highly accurate and stable digital pyrometer, the SPOT AL EQS uses AMETEK Land’s cutting-edge SPOT technology, and unique, advanced data-processing algorithms, to measure aluminium temperature at an extruder press exit , quench or strip mill.

  • Land - Model System 4 - Highly Accurate Infrared and Fibre Optic Thermometers

    Land - Model System 4 - Highly Accurate Infrared and Fibre Optic Thermometers

    High-precision, single-spot pyrometers provide exceptional flexibility across a wide range of temperatures, operating wavelengths and applications. System 4 brings together AMETEK Land’s world-leading range of highly accurate infrared and fibre optic thermometers with our Landmark signal processors, delivering plant operators a complete temperature measurement system capability.

  • Landmark - Model System 4 - Signal Processors

    Landmark - Model System 4 - Signal Processors

    Landmark Signal Processors are designed to produce the process control variables required from any of the System 4 thermometers to improve quality and efficiency. With this total compatibility, you can choose a processor which provides the features and performance you need to meet the requirements of your application. All thermometers and processors are calibrated individually to guarantee interchangeability and easy ongoing maintenance.

  • AMETEK - Model UNO - Stand Alone Radiation Thermometer

    AMETEK - Model UNO - Stand Alone Radiation Thermometer

    A rugged, low-cost, standalone temperature sensor range optimised for OEMs, plant designers and process operators. A non-contact infrared thermometer range designed for standalone use, Simply power it up and UNO provides a 4-20mA output linear over its temperature range. UNO delivers precise, drift-free measurements for even the smallest target areas.

  • SOLOnet - Compact Digital Infrared Thermometers

    SOLOnet - Compact Digital Infrared Thermometers

    Flexible, web browser-enabled digital infrared thermometers customisable to a wide range of process control applications in manufacturing and industry. Compact digital infrared thermometers designed for web browser control, the cutting-edge SOLOnet series offer users versatility and value in a wide range of temperature monitoring applications.

  • Model IQ Series - High Temperature Infrared Spot Thermometers

    Model IQ Series - High Temperature Infrared Spot Thermometers

    The Land IQ series are compact, rugged, industrial thermometers designed to meet the needs of high temperature process control applications. IQ series thermometers feature an all metal design with integrated water cooling, air purge and screw terminal connections to facilitate simple and cost effective operation. Thermometers can be configured using any permutation of four wavelengths, four feature levels and four focus distances to suit users’...

  • Model SPRINT 8 - Digital Thermometer

    Model SPRINT 8 - Digital Thermometer

    A compact, rugged non-contact thermometer designed for lower temperature industrial processes (Available in the Americas only). Designed for the control and process monitoring of lower temperature applications, Sprint 8 integrates AMETEK Land’s reliable measurement into a tough package designed for harsh environments. Machined from durable stainless steel to operate in challenging environments, Sprint 8 outputs a stable measurement via a linear...

  • Model RT8A - Non-Contact Infrared Thermometer

    Model RT8A - Non-Contact Infrared Thermometer

    RT8A is a non-contact infrared thermometer for use in many low temperature applications. It helps asphalt paving or roadstone producers meet state, national and environmental quality compliance requirements and glass manufacturers meet quality compliance requirements in multiple standalone applications. Required to help manufacturers meet the increasing demands for tighter quality control and comply with...

  • Land - Model ABT - Aluminium Billet Temperature Monitoring

    Land - Model ABT - Aluminium Billet Temperature Monitoring

    Fast, accurate, non-contact thermometer designed specifically to measure the temperature profile of aluminium billets as they exit the heating furnace, regardless of the billet emissivity or surface condition. ABT is a dedicated Aluminium Billet Thermometer that gives a highly accurate custom measurement for aluminium billet surfaces, providing an accurate temperature profile of the billet as it passes by. A major advance in monitoring billet...

  • Model ADT - Aluminium Die Monitoring

    Model ADT - Aluminium Die Monitoring

    High accuracy, fast-response thermometer optimised for the measurement of the die prior to loading into the press in aluminium extrusion processes. The ADT , based on the full featured SPOT M160 Fibre optic pyrometer is an Aluminium Die Thermometer designed specifically for measuring pre-heated dies as they are moved from the die oven to installation in the aluminium extrusion press.

  • Model CDA - Incinerator for Measuring Gas Temperature

    Model CDA - Incinerator for Measuring Gas Temperature

    Advanced non-contact infrared thermometer designed for measuring the gas temperature within waste incinerators. The CDA thermometer is optimised to accurately measure the gas temperature in waste incinerators using AMETEK Land’s unique non-contact infrared technology. CDA ‘sees’ through a cold ambient air to measure the hot carbon dioxide beyond. By filtering out other gas types, CDA provides a true gas temperature for exceptional...

  • Model DTT - Drawing Tower Furnaces

    Model DTT - Drawing Tower Furnaces

    A short-wavelength infrared thermometer providing precise and stable temperature measurement for control of optical fibre drawing tower furnaces. A highly accurate temperature measurement of optical fibre drawing tower furnaces, DTT is a Drawing Tower Thermometer that enables production of high quality, low loss optical fibre to the required strength and attenuation. As AMETEK Land’s market-leading infrared technology avoids the practical issues...

  • Model FG - Glass Forehearth

    Model FG - Glass Forehearth

    A simple fibre-optic, two-wire, loop powered thermometer with 4 to 20mA output. Specifically designed to improve process control in the glass industry. Offering accurate, high resolution and reliable temperature measurements up to 1650°C (3000°F), the FG thermometer enables precise control of process temperatures in the glass industry. A simple, cost-effective alternative to tri level thermocouples for some zones measuring bulk glass...

  • Land - Model FLT5A - Float Line Thermometer

    Land - Model FLT5A - Float Line Thermometer

    Accurate and flexible infrared thermometer measurements for measuring glass surface temperature in the tin bath and annealing lehr on float lines.The FLT5A is a standalone thermometer offering precision measurement of the surface temperature of glass float lines, ensuring consistently high product quality throughout the process. Offering excellent precision and long-term stability, the FLT5A’s extensive measurement range removes the need to use...

  • Model FTS - Furnace Thermometer System

    Model FTS - Furnace Thermometer System

    A two-sensor temperature monitoring system designed to continuously measure true load temperatures in reheat furnace applications especially in the challenging heating sections. Using AMETEK Land’s leading-edge infrared sensing to measure both furnace load and background temperature, the Furnace Thermometer System (FTS) links to the advanced Landmark Graphic signal processor for a true temperature of the reheat furnace load unaffected by...

  • Land - Model GST - Galvanneal Strip Thermometer

    Land - Model GST - Galvanneal Strip Thermometer

    A high accuracy infrared thermometer providing non-contact measurements of steel strip in the Galvannealing section of a hot dip galvanizing process. The Galvanneal Strip Thermometer (GST) provides continuous, accurate measurements of temperature and emissivity on coated steel during the galvannealing reaction. By maintaining control of the reaction zone, GST optimises the heating zone to produce high quality galvannealed strip. It also ensures high...

  • Model SP - Spray Chamber

    Model SP - Spray Chamber

    Fibre optic infrared thermometer system, custom-designed for temperature measurements in the hostile environment of the continuous caster spray chamber. A drift-free thermometer designed to overcome the adverse environment of a continuous caster spray chamber, SCP utilises AMETEK Land’s accurate short wavelength processing to ensure a reliable measurement – even in the hottest and harshest conditions. Requiring no...

  • Land - Model VDT - Vapour Deposition Thermometer

    Land - Model VDT - Vapour Deposition Thermometer

    Non-contact infrared thermometer custom-designed for accurate preform temperature measurements in optical fibre manufacture. Optimised for precise preform temperature control in vapour deposition processes, AMETEK Land’s Vapour Deposition Thermometer delivers a critical measurement for production of low-loss, high-bandwidth optical fibre. VDT enables exact sighting onto the rotating preform for an accurate surface temperature...

  • Land - Model SPOT Actuator - Aluminium Pyrometer

    Land - Model SPOT Actuator - Aluminium Pyrometer

    The SPOT Actuator provides remotely controlled target alignment of a SPOT pyrometer for industrial processing applications, specifically for aluminium applications using the SPOT AL EQS (Aluminium Extrusion, Quench and Strip) pyrometer. The SPOT Actuator is a motorised unit which is designed for use at the billet reheat furnace exit, die entrance and exit and quench exit on aluminium extrusion presses and is capable of operating in automatic or...

  • Fixed Thermal Imagers & Line Scanners

    Providing high-resolution thermal information, our imagers and linescanners set the industry standard for performance. Backed by advanced software support, they supply the information you need to keep your process running safely and efficiently.

  • Land - Model ARC Imager - Radiometric Thermal Process Imaging

    Land - Model ARC Imager - Radiometric Thermal Process Imaging

    ARC is a range of General Purpose Thermal Process Imagers which are rugged enough to withstand heavy industrial applications, while compact enough for use in research and development and automation. ARC is a high resolution radiometric thermal imager providing detailed thermal images with unsurpassed temperature accuracy.

  • Land - Model NIR-B - Short-Wavelength Radiometric Infrared Borescope

    Land - Model NIR-B - Short-Wavelength Radiometric Infrared Borescope

    A short-wavelength radiometric infrared borescope imaging camera, designed to measure temperature profiles in furnace interiors. Specifically designed for measuring temperature profiles inside furnaces, NIR Borescope uses AMETEK Land’s cutting-edge, near-infrared imaging to create continuous, high-definition thermal images. By producing a detailed, live radiometric image with accurate temperature information, NIR-B allows operators to measure...

  • Land - Model LSP-HD - Infrared Linescanner for Thermal Process Imaging

    Land - Model LSP-HD - Infrared Linescanner for Thermal Process Imaging

    Compact and sophisticated high accuracy infrared linescanner, designed to produce advanced thermal images of moving processes. A compact infrared linescanner easily integrated using a standard Ethernet connection, the LSP-HD series offers highly accurate temperature measurements in a range of application-specific models. Offering industry-leading scanning performance of 1000 data points even at scan speeds as high as 150 scans per second, LSP-HD sets...

  • Land - Model NIR - Fixed Thermal Imaging Camera

    Land - Model NIR - Fixed Thermal Imaging Camera

    Near Infrared Fixed Thermal Imaging and Temperature Measurement Camera; A fixed thermal imager for high temperature measurement and thermal imaging. Direct Ethernet cable connection to PC running LIPS NIR for display, recording, alarms, analysis and manipulation of thermal images.

  • Land - Model FTI-Eb - Furnace Monitoring System

    Land - Model FTI-Eb - Furnace Monitoring System

    A precise, fixed thermal imager with borescope and wide field-of-views for maximum monitoring coverage requiring only a small diameter access hole through the furnace wall. Various lens and borescope lengths allow for installation and application flexibility. FTI-EB is a high-accuracy, fixed thermal imaging camera, optimised for use in refractory-lined furnaces or boilers, and supported by an extensive range of dedicated accessories for resilient...

  • Model FTI-E Imager - Fixed Thermal Imaging System

    Model FTI-E Imager - Fixed Thermal Imaging System

    A high-resolution, accurate, fast, radiometric thermal imager designed to capture detailed temperature information in harsh industrial environments. Part of AMETEK Land’s advanced intelligent imaging solution, The FTI-E family of imagers provide high-resolution, radiometric thermal images for a wide range of industrial applications in hostile conditions. Easy to install and use, its accurate temperature measurements provide the complete thermal...

  • HotSpotIR - Conveyor Belts

    HotSpotIR - Conveyor Belts

    An extremely compact, fast-response infrared scanning system designed to detect emerging hot spots on conveyor belt materials. Designed for industrial environments, the fixed-focus HotSpotIR high-speed scanning system detects small hot inclusions on a moving conveyor before they can cause a fire. Reliable alarm processing is achieved without software or computer requirements.

  • AMETEK Land - Model SDS-E - Slag Detection System

    AMETEK Land - Model SDS-E - Slag Detection System

    The Slag Detection System (SDS) is the proven solution for accurate and timely detection of slag carryover in the steelmaking process, allowing plants to improve product quality, reduce slag carryover and improve operator safety. With over 60 years of application expertise in the steel industry AMETEK Land’s Slag Detection System (SDS) accurately and rapidly detects the onset of slag carry-over. This fast response significantly reduces slag...

  • Thermal Imaging Glass-melt Tanks - NIR Borescope (NIR-B) Glass

    Thermal Imaging Glass-melt Tanks - NIR Borescope (NIR-B) Glass

    The NIR Borescope (NIR-B) Glass is a short wavelength radiometric infrared borescope imaging camera, designed to produce high definition (656 x 494 pixel) thermal images, along with providing accurate temperature measurements from any selected points in the image. The camera measures temperatures in the range 1000 to 1800 °C (1832 to 3272 °F) and is suitable for float glass, container glass, borosilicate glass and fibre glass melt furnaces.

  • AMETEK Land - Model HotSpotIR - Supercalender Roll

    AMETEK Land - Model HotSpotIR - Supercalender Roll

    Hotspot Detection for Continuous Process Monitoring and Quality Control. As production rates and temperatures rise, the possibility of overheating a roll, causing a blister or losing the coating increases. Coated rolls can be repaired, but the cost can be tens of thousands of dollars and the associated downtime further adds to this. The coated rolls rotate at high speeds and some of the developing hot spots can be quite tiny so it is impossible to...

  • AMETEK - Model NIR-B 3XR - HPI - Reformer & Cracker Tube Furnace Thermal Imaging System

    AMETEK - Model NIR-B 3XR - HPI - Reformer & Cracker Tube Furnace Thermal Imaging System

    An infrared thermal imaging solution offering continuous, short-wavelength, 24/7 temperature monitoring for steam reformer and Ethylene cracker tube furnaces. NIR Borescope (NIR-B) 3XR is a radiometric infrared imaging camera optimised for continuous temperature measurements in steam reformer and cracker tube furnaces. Using the proven technology of AMETEK Land’s advanced NIR thermal imager, NIR-B 3XR offers highly accurate measurements of high...

  • Model NIR-B Glass - Melt Tank - Borescope Thermal Imaging Camera

    Model NIR-B Glass - Melt Tank - Borescope Thermal Imaging Camera

    A borescope thermal imaging camera, specifically developed to return precise temperature measurements in glass furnace applications. An application-specific version of AMETEK Land’s cutting-edge NIR-B thermal imaging camera, Near Infrared Borescope (NIR-B) Glass creates detailed, live radiometric images that accurately measure temperatures inside of a glass melt furnace.

  • Model ASPS - Aluminium Strip Coiling

    Model ASPS - Aluminium Strip Coiling

    An application-specific version of the proven ARC thermal imaging system, designed for temperature monitoring of aluminium strip coiling. Developed specifically for accurate, edge-to edge temperature measurement of aluminium strip at the coiler. ASPS uses a Patented technique of advanced radiometric thermal imaging to produce highly accurate temperature measurements at the coiler...

  • Model LSP HD-50/LSP HD-52 - Glass Tempering Furnace System

    Model LSP HD-50/LSP HD-52 - Glass Tempering Furnace System

    An integrated solution for high-accuracy temperature measurements in glass toughening plants - independent of surface coatings applied to the glass. Glass Tempering Furnace System meets the challenge of accurately measuring glass temperatures for plants running multiple glass types – even using a variety of coatings, including low-emissivity surfaces. Easy to install and use, AMETEK Land’s high-precision technology...

  • Calibration Sources

  • Landcal - Model P1200B - Mid-Range Temperature Bench-Mounted

    Landcal - Model P1200B - Mid-Range Temperature Bench-Mounted

    Bench-mounted, primary standard, var. temp. source. LANDCAL P1200B is a bench mounted, primary standard, variable temperature source designed for testing and precise calibration of most industrial radiation thermometers, thermographic equipment and thermocouples.

  • Landcal - Model P1600B2 - High Temperature Bench-Mounted

    Landcal - Model P1600B2 - High Temperature Bench-Mounted

    Bench-mounted, primary standard, var. temp. source. LANDCAL P1600B2 is a new improved bench mounted, primary standard, variable temperature source designed for testing and precise calibration of most high temperature industrial radiation thermometers, thermographic equipment and thermocouples.

  • Landcal - Model P550P - Low Temperature Portable

    Landcal - Model P550P - Low Temperature Portable

    Portable Primary source - up to 550 °C/ 1020 °F. LANDCAL P550P is a portable, variable temperature, blackbody radiation source. It is a primary standard designed for high precision calibration of low temperature radiation thermometers.

  • Landcal - Model P80P - Low Temperature Portable

    Landcal - Model P80P - Low Temperature Portable

    Portable Primary source - up to 80 °C/ 175 °F. LANDCAL P80P is a portable, variable temperature, blackbody radiation source. It is a primary standard designed for high precision calibration of low temperature radiation thermometers with sub-zero measurement capability.

  • Landcal - Model R1200P - High Temperature Portable

    Landcal - Model R1200P - High Temperature Portable

    Portable Reference Source - 350 to 1150 °C/650 to 2000 °F. LANDCAL R1200P is a high stability portable, blackbody reference standard source. R1200P can be used for both on-site or laboratory calibration of a range of short wavelength thermometers, such as System 4 and Fibroptic radiation thermometers.

  • Landcal - Model R1500T - High Temperature Transport

    Landcal - Model R1500T - High Temperature Transport

    High Temp. Transportable blackbody reference source. LANDCAL R1500T is a high temperature, transportable blackbody radiation source designed for calibration of a range of thermometers such as System 4 and Fibroptic thermometers. R1500T is a reference standard source giving a resolution of ±1°C/2°F.

  • Portable Non-Contact Thermometers

  • Cyclops L - Model CO55L Meltmaster & C100L/C160L/C390L - Portable Non-Contact Pyrometers

    Cyclops L - Model CO55L Meltmaster & C100L/C160L/C390L - Portable Non-Contact Pyrometers

    Easy to handle, simple to operate, Cyclops L portable non-contact pyrometers provide precise temperature measurements. Easily take measurements in multiple locations and verify on-line pyrometer readings. Durable, yet light weight construction means you can operate it for hours at a time without fatigue. Designed for single-handed use, Cyclops L’s high-resolution lens sighting and an ergonomic one-handed use design, make it simple for you to...

  • Cyclops L - Cross Body Portable Pyrometer Sling

    Cyclops L - Cross Body Portable Pyrometer Sling

    The Cross-body Portable Pyrometer Sling keeps the Cyclops L tight against your body to prevent swinging, bumping or accidental drops and makes it easily available for taking a temperature measurement.

  • Combustion Efficiency Monitors

    Close monitoring of oxygen, carbon monoxide and sulphuric acid dewpoint can help improve combustion efficiency, lower energy use, reduce emissions and prevent plant corrosion. We offer precision measurements for these applications.

  • Land - Model 9100 - Cross-Stack, Infrared Carbon Monoxide (CO) Monitor

    Land - Model 9100 - Cross-Stack, Infrared Carbon Monoxide (CO) Monitor

    A highly accurate, cross-stack, infrared carbon monoxide (CO) monitor suitable for use in a wide range of industrial combustion efficiency applications. Developed based on AMETEK Land’s decades of experience in carbon monoxide monitoring solutions, the Model 9100 provides the direct, continuous, cross-stack CO measurement and fast-response coverage essential to efficient combustion control in boilers.

  • Land Genesis - Model WDG 1200 & 1210 - Flue Gas Oxygen Analyzers

    Land Genesis - Model WDG 1200 & 1210 - Flue Gas Oxygen Analyzers

    A highly flexible range of high-precision flue gas oxygen analysers developed specifically for combustion analysis and control applications. Using AMETEK’s industry-proven zirconium oxide sensor technology, the WDG-1200/1210 range provides the world’s first fully-integrated, standalone flue gas oxygen analysers. The user interface is mounted onto the probe, lowering installation costs.

  • Lancom - Model 200 - Portable Acid Dewpoint Temperature Monitoring

    Lancom - Model 200 - Portable Acid Dewpoint Temperature Monitoring

    A portable monitoring device using conductive cell technology for accurate, periodic measurements of the Acid Dewpoint Temperature (ADT) in combustion processes. Designed specifically to provide the unique but vital measurement of sulphuric acid dewpoint temperature, the portable Lancom 200 supports boiler efficiency checks, corrosion protection and the management of high-cost fuel additives.

  • Portable Gas Analysers

    LAND has a range of portable gas analysers for testing, checking and monitoring combustion processes for operating efficiency, and analyzing pollutant gas emissions for environmental compliance. The range comprises lightweight, simple-to-use portable gas analysers with facilities aimed at a wide range of applications. Up to 9 gas measurement are available on a single analyser. There are a wide range of options available, including a data acquisition system - plus the ability to self-configur

  • Lancom - Model 4 - Compact Portable Multigas Analyser System

    Lancom - Model 4 - Compact Portable Multigas Analyser System

    Compact portable multigas analyser, capable of measuring up to eight flue gases in a range of combustion and emissions processes. Lancom 4 delivers the complete solution for portable flue gas analysis, integrated into a compact battery-powered unit able to measure up to eight gases simultaneously with nine separate sensors. Simple to set-up and easy to operate, Lancom 4 enables highly accurate spot and semi-continuous gas testing adaptable to a wide...

  • Opacity and Dust Monitors

    The most advanced range of opacity, dust and particulates monitors available, use patented technology to deliver highly accurate results. With no moving parts, they combine high reliability with low maintenance.

  • Land - Model 4500 MkIII - Compliance Opacity and Dust Monitor

    Land - Model 4500 MkIII - Compliance Opacity and Dust Monitor

    A high-specification opacity and dust monitor meeting global compliance standards for monitoring combustion processes. 4500 MkIII is the most accurate and reliable continuous opacity monitor available, combining AMETEK Land’s ground-breaking innovation and simple design for precise, problem-free operation. Unmatched, class-leading accuracy ensures compliance limits for dust emissions and stack opacity are met with confidence. This avoids the...

  • Land - Model 4650-PM - Compliance Particulate Matter Monitor

    Land - Model 4650-PM - Compliance Particulate Matter Monitor

    High-sensitivity, forward-scatter laser measurement for particulate matter, for use in combustion processes where condensed water is not present (for sale in the USA and China only). 4650-PM provides the stable, accurate low-range measurement of particulate matter in stacks and ducts where water droplets are not present in the flue gas. NOTE: The 4650-PM is currently available only in the USA and China.

  • Model 4200+ - Non-Compliance Opacity and Dust Monitor

    Model 4200+ - Non-Compliance Opacity and Dust Monitor

    Dust and opacity monitor, designed for measuring dust emission concentrations in combustion applications where automatic calibration checks are not required. The 4200+ is the most accurate and reliable monitor available for dust and opacity measurements in combustion applications not requiring automatic calibration checks and regulatory compliance. Optimised for multi-process plants using common exhaust stack sizes, 4200+ delivers you immediate...

  • Land - Model 4200 - Non-Compliance Dust Emissions Monitor

    Land - Model 4200 - Non-Compliance Dust Emissions Monitor

    Simple, lightweight dust and opacity monitor designed to measure emission levels in combustion processes where regulatory compliance is not required (for sale in Asia only). The 4200 dust and opacity monitor is AMETEK Land’s compact, cost-effective solution for the continuous monitoring of dust, smoke and particulates in a wide range of industrial applications. NOTE: The 4200 is currently available only in Asia.

  • Carbon Monoxide Detectors

  • Millwatch - Advanced Carbon Monoxide Detector

    Millwatch - Advanced Carbon Monoxide Detector

    An advanced carbon monoxide detector designed to provide early warning of spontaneous combustion in pulverisers for coal and biomass. Specifically designed for early detection of potential fire risk in pulverizing mills in coal or biomass processes, Millwatch monitors and quickly responds to sudden carbon monoxide (CO) build-up, allowing preventative action to be taken before a hazardous condition develops.

  • Stack Gas Emissions Analysers

    LAND has a range of stack gas emissions analysers suitable for measuring a wide range of pollutant gases. These analysers are for stack emissions monitoring of CO, O2, NO, NO2, NOx, SO2, SO3 & CO2 in flue gas. These gas analysers can operate stand-alone or form part of an automated measurement system (AMS) or continuous emissions monitoring system (CEM).

  • Land - Model CEMs - Continuous Emissions Monitoring System Backup

    Land - Model CEMs - Continuous Emissions Monitoring System Backup

    What happens to your emissions data when a CEMs undergoes routine maintenance or an unexpected breakdown occurs?. Simple, it continues to be captured with the LAND CEMs Back-up system. This system keeps data downtime to a minimum - and ensures that any possible restrictions on data availability as part of an operating permit are met. The CEMs Back-up system can operate for minutes, hours or days, until the CEMs is back on-line.

  • Coal Fire Detection Systems

    LAND offers a system capable of monitoring the entire coal handling process including applications such as coal storage and transportation as well as the actual grinding. The early detection of a coal fire is vital to the safe and efficient operation of any plant. LAND has a range of coal fire detection systems based upon the best monitoring technology available.

  • Silo Fire Detector

    Silo Fire Detector

    Advance warning of the onset of coal silo fires through the early detection of the build-up of carbon monoxide in the silo.

  • Land - Mill Fire Detection System

    Land - Mill Fire Detection System

    Advance warning of the onset of coal mill and silo fires through the early detection of the build-up of carbon monoxide in the mill.

  • SPOT Thermometers

    The NEW SPOT range is an innovative stand-alone infrared thermometer design with advanced integrated processing capabilities. The latest technologies utilized in SPOT make non-contact infrared temperature measurement accurate, flexible and easy to use.

  • SPOT - Model M100 Standard Body - Single Wavelength Thermometer

    SPOT - Model M100 Standard Body - Single Wavelength Thermometer

    The M100 thermometer has a measurement range of 500 to 1800°C / 932 to 3272°F, at a single 1.0µm wavelength. Proven, reliable electronics and a high quality optical system combine to give a thermometer which delivers accurate, repeatable temperature measurement. Minimum target size is 1.5mm 300mm distance. The M100 is aimed at high temperature applications such as steel and glass production, where temperature is critical to the quality...

  • SPOT - Model M100 F.O. - Non- Contact Thermometers

    SPOT - Model M100 F.O. - Non- Contact Thermometers

    The M100 Fibre-optic version measures imeasure in a temperature range of 500 to 1800°C / 932 to 3272°F, at a similar 1.0μm wavelength. The use of flexible fibre-optic light guides allows the optic head to be mounted in a hostile environment; the detector and electronics enclosure to be located in a less hostile environment, several meters away. The use of the fibre-optic variant permits viewing of inaccessible targets, in areas with high...

  • SPOT - Model M160 Standard Body - Single Wavelength Thermometer

    SPOT - Model M160 Standard Body - Single Wavelength Thermometer

    The M160 is a single wavelength thermometer, measuring in the range 250 - 1600 °C / 482 to 2912°F at a wavelength of 1.6µm.Like other single wavelength thermometers the user interface is on the back of the thermometer. This displays all the key thermometer settings plus simple three button operation, you can access all the instrument settings including: Settings, I/O, Network, Focus, Alarms, Time Functions, an Advanced setting where you...

  • SPOT - Model M160 Fibre-optic - Single Wavelength Thermometer

    SPOT - Model M160 Fibre-optic - Single Wavelength Thermometer

    The M160 F.O. is single wavelength (1.6µm) thermometer, measuring between 250 - 1600 °C / 482 to 2912°F. The small optic head allows access into the most difficult measure locations. The fibre-optic length options (3,6 and 10m/10, 20 and 33ft). The optic head can withstand ambient temperatures up to 200 °C / 392 °F. A range of fibre-optic mountings are available to satisfy your needs. Uses a red LED for target alignment.

  • R100 & Fibre-optic

    R100 standard body and Fibre-optic models.

  • Model R100 & Fibre-optic - Multi-Wavelength

    Model R100 & Fibre-optic - Multi-Wavelength

    The R100 and F.O. version use two wavelengths, 1 and 1.2µm. All settings are selectable using the local user interface or  remotely via a Web browser or SPOT Viewer software. Fibre-optic models use a red LED for target alignment. Minimum target size is 1.5mm @ 300mm distance – standard body variant only.  Five choices of measurement modes are available, from monochromatic, Ratio (2-color) to combined wavelength models.

  • Model R160 & Fibre-optic - Multi-Wavelength

    Model R160 & Fibre-optic - Multi-Wavelength

    The R160 and F.O. version uses two wavelengths 1 and 1.5µm. All settings are selectable using the local user interface or remotely via a web browser or SPOT Viewer software. Fibre-optic models use a red LED for target alignment. Minimum target size is 1.5mm @ 300mm distance – standard body variant only.

  • Industry Application Specific

    We design systems specifically to solve critical temperature measurement problems in particular industrial  applications. These specialised solutions provide optimised performance in challenging processes.

  • Temperature Measurements Devices

    Temperature Measurements Devices

    AMETEK Land’s unique reference pyrometer designed specifically for temperature measurements on the surface of reformer tubes. As the only instrument that can provide a repeatable, reliable temperature for reformer tubes, Gold Cup eliminates inherent errors that affect other infrared devices. This makes it ideal for checking and correcting other measurement devices.

  • Model JRG/A - Plate and Float Glass

    Model JRG/A - Plate and Float Glass

    Application specific design, compact  fast-response thermometer designed for temperature measurements on plate and float glass applications. A unique miniature radiation thermometer measuring just 28mm x 4mm, JRG/A is specifically designed to monitor temperature consistency in plate and float glass applications.

  • Model SD - Blast Furnace Stove Dome

    Model SD - Blast Furnace Stove Dome

    A short wavelength infrared thermometer system specifically designed for high-precision, and rapid non-contact temperature measurements of the refractories inside blast furnace stoves. The application-specific Stove Dome (SD) system uses AMETEK Land’s advanced infrared radiation thermometer technology to monitor refractory temperatures around the stove dome or hot blast main.

  • Model Understrip - Fibre-Optic Temperature Measurement System

    Model Understrip - Fibre-Optic Temperature Measurement System

    A fibre-optic temperature measurement system designed to provide continuous, accurate monitoring of the scale-free metal surface under the steel mill roller table. AMETEK Land’s application-specific solution for temperature measurements in the hot rolling of flat steel products, the Understrip is a rugged, accurate system designed to take measurements from the underside of the steel. This avoids any effects from surface water or minor scale that...

Products by Ametek Process Instruments - THERMOX

  • Electrolytic

  • AMETEK PI - Model 303B - Moisture Analyzer

    AMETEK PI - Model 303B - Moisture Analyzer

    The Model 303B offers a simple solution to the problem of measuring the moisture content of gas streams. Using an electrolytic (P2O5) sensor, the Model 303B can be used to monitor nearly all gases. It is compact, lightweight, and suitable for both portable use and permanent installation in Class I Div. 2 areas. With the optional carrying bag and lightweight design, the 303B is truly portable.

  • Trace Gas Chromatographs

  • AMETEK PI - Model ta3000 - Gas Analyzers

    AMETEK PI - Model ta3000 - Gas Analyzers

    AMETEK PI - Model ta3000 - Gas AnalyzersTrace Level Gas Monitoring For Bulk Gas, Environmental and Research Laboratory Applications. The Trace Analytical ta3000 series, manufactured by AMETEK Process Instruments, is a family of instruments designed to monitor trace levels of specific impurities in bulk gases, environmental applications and research applications. All ta3000 instruments include a dedicated sample processing system, a single high...

  • AMETEK PI - Model ta5000 - Gas Analyzers

    AMETEK PI - Model ta5000 - Gas Analyzers

    Trace Level Gas Monitoring For Bulk Gas, Environmental and Research Laboratory Applications. The presence of trace impurities in gas supplies and ambient air are of significant concern for bulk gas producers, semiconductor manufacturers, plant environmental safety personnel, and research scientists. The presence of impurities can lower product quality, reduce process yields, skew research results, or indicate a possible environmental hazard.

  • AMETEK PI - Model ta7000 - Gas Purity Monitors

    AMETEK PI - Model ta7000 - Gas Purity Monitors

    The Need: Today's high purity manufacturing processes, especially those in the semiconductor industry, require extremely high purity process gases in order to protect product quality and ensure product yields. As a result, these processes become more complex and vulnerable to disruptions due to the expiration of flow components, component outgassing, and accidental purifier overload. It is crucial to detect contamination before it is spread throughout...

  • AMETEK PI - Model Sigma 4000 - Multipoint Stream Selector

    AMETEK PI - Model Sigma 4000 - Multipoint Stream Selector

    Proper monitoring of the purity of the process gases which feed semiconductor manufacturing equipment and processes requires monitoring at multiple sample points. However, placing individual gas purity analyzers at all these sample points can be very expensive.

  • AMETEK PI - Model MGB1000 - Micro Gas Blender

    AMETEK PI - Model MGB1000 - Micro Gas Blender

    Today's demanding trace impurity detection applications require the utmost in accuracy from the gas purity analyzers monitoring them. To ensure that these high technology analyzers are operating optimally, it is often necessary, or simply desired, to periodically verify their calibration.

  • Gas Chromatographs TCD

  • AMETEK PI - Model 292B - Portable Natural Gas Chromatograph

    AMETEK PI - Model 292B - Portable Natural Gas Chromatograph

    The AMETEK Model 292B natural gas chromatograph is designed as a truly ‘portable’ analyzer. An integrated sample inlet manifold allows for single connections of sample and drive (carrier) gases, allowing for flexible installation either as a stand-alone analyzer, or integrated onto a mobile platform such as a truck or other vehicle. On-site analysis not only eliminates the concerns over accurate sample acquisition and transport, it also...

  • Gas Gravitometers

  • AMETEK PI - Model Ranarex - Portable Gas Gravitometer

    AMETEK PI - Model Ranarex - Portable Gas Gravitometer

    The Need: Plant and process operators need a reliable, simple means of confirming the quality or mixture of process gases. The means used to perform these tests must be reliable, accurate, and very affordable. For many processes and situations, gas quality can be easily inferred through a simple analysis of the gas mixture's specific gravity as opposed to a complex spectral analysis.

  • Infrared

  • AMETEK PI - Model IPS-4 - Integrated Photometric Spectrometer

    AMETEK PI - Model IPS-4 - Integrated Photometric Spectrometer

    AMETEK Process Instruments Model IPS-4 is a huge step forward in capability and reliability for process spectrophotometers. The IPS-4 is capable of measuring up to eight wavelengths in a gas or liquid phase sample. Sample handling and conditioning systems are available as an option that is integrated into the IPS-4's sample cell enclosure.

  • Manual and On-Line Chilled-Mirror Dew Point Analyzers

  • AMETEK PI - Model Chanscope II - Dew Point Tester

    AMETEK PI - Model Chanscope II - Dew Point Tester

    The Need: Natural gas pipeline operations are dramatically impacted by the presence or formation of liquids within the gas pipeline. The dew point of the natural gas must be periodically checked in order to ensure that troublesome liquid formation is not occuring in the pipeline.

  • AMETEK PI - Model 241CE II - Hydrocarbon Dew Point Analyzer

    AMETEK PI - Model 241CE II - Hydrocarbon Dew Point Analyzer

    The Model 241CE II Hydrocarbon Dew Point Analyzer is a quality control tool for natural gas processing, distribution and consumption. Detection and measurement of hydrocarbon dewpoint is achieved in a single cell, single cycle operation.

  • AMETEK PI - Model Standard Bureau of Mines - Dew Point Tester

    AMETEK PI - Model Standard Bureau of Mines - Dew Point Tester

    The Need: Natural gas pipeline operations are dramatically impacted by the presence or formation of liquids within the gas pipeline. The dew point of the natural gas must be periodically checked in order to ensure that troublesome liquid formation is not occuring in the pipeline. Operators and technicians need an accurate, rugged means of determining the dew point of the gas within the pipeline.

  • Mass Spectrometers

  • Dycor - Benchtop Gas Analyzer

    Dycor - Benchtop Gas Analyzer

    The Dycor Benchtop Mass Spectrometer is a compact versatile gas analysis system for sampling gases over a wide range of pressures, from high vacuum up to and beyond atmospheric pressure. The analyzer and inlet system can be removed from the frame and placed up to 10 feet from the pumping station using the included cable and vacuum hose.

  • Dycor - Model LC-D Series - Residual Gas Analyzer

    Dycor - Model LC-D Series - Residual Gas Analyzer

    The Dycor LC-D Series Residual Gas Analyzer (RGA) offers outstanding performance, yet is priced to be the most cost-effective RGA on the market. The LC-D Series instruments are constructed from materials that are compatible with Ultra High Vacuum (UHV) systems and are designed to require the very minimum in maintenance. This versatile RGA is ideally suited for use with UHV systems and equipment monitoring of semiconductor and thin film processes in...

  • Dycor - Model ProLine - Process Mass Spectrometers

    Dycor - Model ProLine - Process Mass Spectrometers

    With outstanding sensitivity, stability and unequaled clean mass separation across the whole mass range, these analyzers offer process MS at a process GC price. Available in benchtop, weatherproof and hazardous area configurations, the analyzers can sample from up to 32 inlet ports each of which can be assigned different analysis methods. Now you can afford to use MS for applications currently using GC, NIR, FTIR or multiple single component devices,...

  • ProMaxion - Model MS - Online Gas Analysis for Weatherproof or Hazardous Area Locations

    ProMaxion - Model MS - Online Gas Analysis for Weatherproof or Hazardous Area Locations

    AMETEK's ProMaxion process mass spectrometer offers real-time analysis in a reliable easy-to-use package for a wide range of industrial applications. Real-time process monitoring of up to 32 components is straightforward with ProMaxion's powerful, easy-to-use Process 2000 software. Complex overlapping spectra are handled automatically and data output directly in concentration units. Different calibration and analysis methods can be assigned to each...

  • FlarePro - Process Mass Spectrometer

    FlarePro - Process Mass Spectrometer

    Fast, Accurate Determination of Flare Gas Heat Value by Process MS. New rules for flare stack combustion from the US Environmental Protection Agency (EPA) set to take effect in early 2019 include additional monitoring and analysis requirements that make it necessary for refinery operators to quickly and accurately determine the heat values of flare stack gases. Determining the heating values of vent gas is important because sufficient combustible...

  • DyMaxion - Enclosed Ion Source Gas Analyzer

    DyMaxion - Enclosed Ion Source Gas Analyzer

    Increased sensitivity and decreased background noise are possible due to the ionizer design. An enclosed ion source operates with sample pressures as high as 10-3 torr with no need for futher pressure reduction of this differentially pumped inlet system. Higher sample pressures contain greater numbers of neutrals and more sample to ionize. With each order of magnitude increase in pressure, signal strength varies proportionally with sample density....

  • DyMaxion - Model RGA - Smart Sensor Residual Gas Analyzer

    DyMaxion - Model RGA - Smart Sensor Residual Gas Analyzer

    This “zero footprint” Smart Sensor Residual Gas Analyzer has the data acquisition and control electronics mounted directly on the sensor, and can be linked to a computer via either its RS-232 port, or RS-485 port for multiple analyzer instruments.

  • UV Vis

  • Model 4000 - Configurable Photometric Analyzer

    Model 4000 - Configurable Photometric Analyzer

    AMETEK' Process Instruments Model 4000 Photometric Analyzer is a proven choice for reliable, accurate, continuous, online photometry measurement. It is the only photometric analyzer on the market with over 40 years of actual field experience in thousands of applications. The Model 4000 was initially developed to fill various process and environmental measurement needs within the chemical industry, and later the applications were expanded to include a...

  • Model 910 - Hot/Wet Multi Gas Mass Flow CEM

    Model 910 - Hot/Wet Multi Gas Mass Flow CEM

    The AMETEK Process Instruments Model 910 is specifically configured for monitoring the stack emissions of multiple pollutants on a mass rate basis. It measures stack effluent temperature and velocity in addition to as many as five pollutant concentrations at stack conditions, enabling each pollutant's mass emission rate to be reported. With the addition of an optional zirconium oxide sensor, the Model 910 is capable of monitoring oxygen.

  • Model 914 - Continuous Emission Monitoring System

    Model 914 - Continuous Emission Monitoring System

    The  Model 914 is a built-to-order Continuous Emission Monitor (CEM) that includes all the components needed for a compliance monitoring and reporting project. The system uses dry extractive sampling techniques designed to meet government regulations for all types of compliance monitoring.

  • Model 919 - Hot/Wet Single Gas Analyzer

    Model 919 - Hot/Wet Single Gas Analyzer

    The Model 919 is specifically configured for monitoring stack emissions on a concentration basis. With the addition of an optional zirconium oxide sensor, the Model 919 is capable of monitoring oxygen. Robust and reliable analyzer, the Model 919 has no-moving-parts, UV-based measurements do not suffer from H2O and CO2 interference. This greatly simplifies sample handling and sample integrity as there is no need for sample drying. As a fully...

  • Model 920 - Hot/Wet Multi Gas CEM

    Model 920 - Hot/Wet Multi Gas CEM

    The AMETEK Western Research Model 920 is specifically configured for monitoring the stack emissions of multiple pollutants on a concentration basis. It measures as many as five pollutants at stack conditions. With the addition of an optional zirconium oxide sensor, the Model 920 is capable of monitoring oxygen.

  • Model 930 - H2S in Sulfur Pit Analyzer

    Model 930 - H2S in Sulfur Pit Analyzer

    In many sulfur recovery units, produced sulfur is stored in liquid form in sulfur pits. Operators are increasingly aware that sulfur pits present potential danger to plant personnel and overall plant safety. It is therefore critically important to monitor H2S in the vapour space of sulfur pits to ensure that it remains below the Lower Explosive Limit (LEL) (4.3% by volume). Additionally, the presence of rising concentrations of SO2 in the sulfur pit...

  • Model 931 - Single Gas H2S Analyzer (opt. + H2 and HC)

    Model 931 - Single Gas H2S Analyzer (opt. + H2 and HC)

    The Model 931 uses a sophisticated UV-VIS photometer to measure any single UV-absorbing gas species for process monitoring and control. Additional IR and thermal conductivity sensors capable of detecting non-UV absorbing species, such as CO2 and H2 can be incorporated into the design. The 931 is provided as an explosion-proof package making it suitable for most chemical and petrochemical applications.

  • Model 932 - Multi Gas H2S Analyzer (opt. + H2 and HC)

    Model 932 - Multi Gas H2S Analyzer (opt. + H2 and HC)

    The Model 932 uses a sophisticated UV-VIS photometer to measure up to five gas species for process monitoring and control for chemical processes. The Model 932 is provided as an explosion-proof package and our proprietary high-resolution UV-VIS technology which is completely free from water or hydrocarbon interference, maximizing measurement accuracy. A very flexible design, the 932 can be optionally equipped with additional sensors to add the...

  • Model 933 - H2S in Natural Gas

    Model 933 - H2S in Natural Gas

    The Model 933 is a unique UV-based photometric analyzer system for H2S analysis when present in concentrations below 100 ppm in natural gas and other applications. The analyzer responds quickly to changes in H2S concentration and it quickly self-recovers from extreme upset conditions.

  • Model 934 - Sensor Specific Gas Analyzer

    Model 934 - Sensor Specific Gas Analyzer

    The Model 934 is a rugged, analyzer adapted from the Model 931/932 UV analyzer platform for measurement of Hydrogen in Tail Gas Treating Units (TGTU) where the UV (H2S) is not required. The Model 934 analyzer system has a heated cell to avoid and hydrocarbon or water condensation.  A fully integrated AMETEK Process Instruments sample system ensures reliable dew point control without running the risk of plugging, contaminating, or flooding the...

  • Model 9900RM - Single or Multi-Component Gas Analyzer

    Model 9900RM - Single or Multi-Component Gas Analyzer

    The new Model 9900RM is a single or multi-component gas analyzer that can be used alone or as an integrated part of a continuous emissions monitoring (CEM) system. The analyzer is 19” rack-mountable and supports Modbus/RS485 and Ethernet connectivity.  This is a rugged, single or multi-gas analyzer, free of interference from water and CO2.

  • X-Ray Fluorescence

  • ASOMA - Model 682T-HP - On-Line Analysis of Sulfur

    ASOMA - Model 682T-HP - On-Line Analysis of Sulfur

    The ASOMA 682T-HP is designed for the on-line analysis of sulfur in highly viscous hydrocarbons such as crude and residual oil using XRT (X-ray Transmission) technology. This system is ideal for high temperature and pressure sample streams. With its rugged, time-proven proportional counter detector and X-ray tube source, the 682T-HP gives superb analytical precision with a sulfur limit of detection of 200 ppm. The 682T-HP key features include a fully...

  • Thermox

  • Thermox - Model WDG-V - Combustion Analyzer

    Thermox - Model WDG-V - Combustion Analyzer

    The reliable identification of low combustion oxygen in a fired heater or boiler has always been critical to the effectiveness of the Burner Management System for proper control and safety. Low emission burners and aggressive firing control points to achieve increased efficiency and emission reductions have driven the industry to tighter control measures.  But tighter control measures also hold a greater potential for combustion events. Reducing...