32 products found

Products

  • THERMOX

  • Thermox - Model WDG-V - Combustion Analyzer

    Thermox - Model WDG-V - Combustion Analyzer

    The reliable identification of low combustion oxygen in a fired heater or boiler has always been critical to the effectiveness of the Burner Management System for proper control and safety. Low emission burners and aggressive firing control points to achieve increased efficiency and emission reductions have driven the industry to tighter control measures.  But tighter control measures also hold a greater potential for combustion events. Reducing...

  • THERMOX - Model WDG-IV - Flue Gas Oxygen Analyzer

    THERMOX - Model WDG-IV - Flue Gas Oxygen Analyzer

    The WDG-IV analyzer measures oxygen, combustibles and methane in natural gas-fired applications. It is ideal for gas-fired power boilers or for those using natural gas during start-up and shutdown. With this analyzer, you can monitor oxygen and combustibles for maximum fuel efficiency. Available with Series 2000 controller or integrated /IQ electronics.

  • THERMOX - Model WDG-IV UOP/RP - Oxygen Analyzer for UOP CCR Platforming Process

    THERMOX - Model WDG-IV UOP/RP - Oxygen Analyzer for UOP CCR Platforming Process

    The UOP Continuous Catalyst Regeneration Process requires low-level continuous oxygen measurement during the regeneration process to protect the Platonized catalyst from oxidation. The process is operated at elevated temperature and pressure. The flue gas contains low levels of HCL and catalyst fines. The critical oxygen measurement analyzer must be able to survive the veracious nature of the process while maintaining a high level of accuracy at low...

  • THERMOX - Model WDG-HPII Series - Flue Gas Oxygen Analyzer

    THERMOX - Model WDG-HPII Series - Flue Gas Oxygen Analyzer

    The WDG HPII Series offers a unique chimney-effect/convective sampling technology that incorporates the advantages of insitu probe high particulate sampling with high temperature and corrosion resistance of extractive analyzers. The HPII is ideal for combustibles and oxygen measurement on applications in cement and lime kilns, foundry and metals production furnaces, coal, wood waste and heavy oil-fired boilers, black liquor recovery boilers. ...

  • THERMOX - Model WDG-IVM/IQ - Smart Flue Gas Analyzers

    THERMOX - Model WDG-IVM/IQ - Smart Flue Gas Analyzers

    The WDG-IVM analyzer measures oxygen, combustibles and methane in natural gas-fired applications. It is ideal for gas-fired power boilers or for those using natural gas during start-up and shutdown. With this analyzer, you can monitor oxygen and combustibles for maximum fuel efficiency. In addition, the methane detector can be used for purge and lightoff cycles during start-up and shutdown. Available with Series 2000 controller or integrated /IQ...

  • THERMOX - Model WDG Insitu Probe - Smart Flue Gas Oxygen Analyzer

    THERMOX - Model WDG Insitu Probe - Smart Flue Gas Oxygen Analyzer

    The Need: Modern gas, oil and coal fired boiler operations require dependable, low-maintanence, application flexible devices to monitor and control combustion processes. The measurement of excess oxygen in flue gas is particularly important for obtaining maximum combustion fuel efficiency while minimizing thermal or fuel-bound Nitrogen oxides generation. The zirconium oxide insitu probe has become the industry standard for making this flue gas-oxygen...

  • THERMOX - Model WDG 1200 Insitu - Flue Gas Oxygen Analyzer with Automatic Calibration & Modbus Output

    THERMOX - Model WDG 1200 Insitu - Flue Gas Oxygen Analyzer with Automatic Calibration & Modbus Output

    The WDG 1200 Insitu and the WDG 1210 Insitu are rugged, reliable flue gas analyzers for net oxygen that use industry-proven zirconium oxide sensor technology. The outer probe tube is 310 stainless steel so no abrasion shield is needed for most applications. The controller features precision temperature control for optimum stability, built-in diagnostics, and over-temperature protection. Modbus and 4-20 mA outputs are standard; automatic calibration is...

  • THERMOX - Insitu Replacement Probes

    THERMOX - Insitu Replacement Probes

    The Need: Removing an oxygen insitu probe from any combustion process is a time consuming and costly task. Periodic removal of insitu probes is required to protect zirconium oxide cells from chemical washdown operations while higher blends and increased use of high ash and lower sulfur PRB coals require more frequent removal of probes to clean plugged filters.

  • THERMOX - Model LinkBus RIMS - Remote Instrument Monitoring System

    THERMOX - Model LinkBus RIMS - Remote Instrument Monitoring System

    The LinkBus Remote Instrument Monitoring System (LinkBus RIMS) from AMETEK addresses the limitations of traditional maintenance programs and frees up resources, making them available to give attention where it is most needed. Maintenance and performance personnel now have easy access to all the analyzers’ vital signs from their desk computer or through the DCS, not just the measured parameter that is typically delivered to the process control...

  • THERMOX - Model S A/F IQ - Stoichiometric Air/Fuel Ratio Analyzer

    THERMOX - Model S A/F IQ - Stoichiometric Air/Fuel Ratio Analyzer

    The Need: Waste gas, biogas, off-gas, blast furnace and coke oven gas are often used as fuel for boilers, reboilers, furnaces, gas turbines and incinerators. The highly variable BTU content makes it difficult to use these fuels efficiently, safely and with minimum emissions. This analyzer directly measures the flow of air needed to burn a flow of a variable composition fuel gas. It can be used to compensate for the non-uniformity in gas supplies and...

  • THERMOX - Model CEM/O2 - Oxygen Analyzer

    THERMOX - Model CEM/O2 - Oxygen Analyzer

    The Need: Continuous Emissions Monitoring systems using hot-wet extractive systems take the flue gas sample from the exit of wet-scrubbers. A hot-wet oxygen measurement is taken from the incoming feed line to the CEM system analysis cabinet. The oxygen analyzer used for this measurement must be equipped to keep the sample gas above the dew point and compact to fit within the restricted space of the analysis cabinet.

  • THERMOX - Model PreMix 2000 - Analyzer

    THERMOX - Model PreMix 2000 - Analyzer

    The Need: Forehearth zone temperature is critical to proper flow of molten glass to fiber forming equipment. The combustion atmosphere in fiber forming baskets is equally important to ensure fiber quality and consistancy. Forehearth zone temperature and fiber forming atmosphere are both controlled by adjusting the air to fuel ratio of discrete premix burner stations feeding these systems. Continuous analysis of resultant excess oxygen or excess fuel...

  • THERMOX - Model CG1000 - Oxygen Analyzer

    THERMOX - Model CG1000 - Oxygen Analyzer

    The CG1000 is a portable oxygen analyzer designed for industrial and laboratory applications. It has a wide operating range (0.1 ppm to 100% O2, autoranging), a fast response to oxygen changes, and advanced electronic capabilities for easy system integration.

  • THERMOX - Model TM2000 - Net Oxygen Analyzer

    THERMOX - Model TM2000 - Net Oxygen Analyzer

    The TM2000 Net Oxygen Analyzer protects industrial processes by quickly responding to changes using an industry proven zirconium oxide sensor. It operates within a wide range of 0.1 ppm to 100% oxygen, and can accurately respond from atmosphere to low ppm oxygen levels in just seconds.  In addition, the TM2000 can detect excess combustibles process upsets in the presence of very low ppm oxygen readings. This unique benefit is particularly...

  • THERMOX - Model 120HD - Portable Hydrogen Analyzer

    THERMOX - Model 120HD - Portable Hydrogen Analyzer

    The 120HD analyzer functions as a katharometer. It operates by having two parallel tubes both of which contain gas and heating coils. The gases are examined by comparing the rate of loss of heat from the heating coils into the gas. The coils are arranged in a bridge circuit so that resistance changes due to unequal cooling can be measured.

  • Process Instruments

  • AMETEK PI - Model 5100 - Gas Analyzer

    AMETEK PI - Model 5100 - Gas Analyzer

    The Model 5100 hosts a single laser platform to measure a single gas analyte. The Model 5100 can measure any one of the following gas analytes: water vapor, methane, hydrogen sulfide, carbon dioxide, and oxygen in process or flue gas. If water vapor is the measured gas analyte, methane can be monitored additionally at percent levels using the same laser.

  • AMETEK PI - Model TDLAS 5100 HD - Gas Analyzer

    AMETEK PI - Model TDLAS 5100 HD - Gas Analyzer

    The Model 5100 HD hosts a dual laser platform. Two separate lasers are installed in the instrument, sharing a common optical path through the sample, enabling the measurement of two analytes simultaneously. This results in significant cost savings to our customers. Where the required concentrations of the analytes differ considerably such that different path lengths are required, two sample cells are used. Model 5100HD is also capable of dual stream...

  • AMETEK PI - Model 5100 P - Portable Gas Analyzer

    AMETEK PI - Model 5100 P - Portable Gas Analyzer

    The AMETEK Model 5100 Portable Gas Analyzer is used for spot checking the performance of plant equipment, like dryers, and verifying the measurements of on-line moisture analyzers. The portable unit operates on the principle of TDLAS and guarantees high specificity, sensitivity and fast response speeds. The unit has a built-in reference cell for laser line-lock.

  • AMETEK PI - Model 303B - Moisture Analyzer

    AMETEK PI - Model 303B - Moisture Analyzer

    The Model 303B offers a simple solution to the problem of measuring the moisture content of gas streams. Using an electrolytic (P2O5) sensor, the Model 303B can be used to monitor nearly all gases. It  is compact, lightweight, and suitable for both portable use and permanent installation in Class I Div. 2 areas.  With the optional carrying bag and lightweight design, the 303B is truly portable.

  • AMETEK PI - Model 2850 - Moisture Analyzer

    AMETEK PI - Model 2850 - Moisture Analyzer

    AMETEK’s Model 2850 Moisture Analyzer establishes a new standard in clean gas moisture analyzers: ultrafast response speed, exceptional accuracy, virtually no interferences, multigas compatibility, and on-board measurement verification. This unique combination of capabilities makes the Model 2850 the moisture analyzer of choice for monitoring process desiccant dryers, instrument air dryers, or air separators, and for industrial gas...

  • AMETEK PI - Model 5800 - Moisture Analyzer

    AMETEK PI - Model 5800 - Moisture Analyzer

    Critical moisture measurement applications include high purity gas production; olefin manufacture, storage, and transmission; semiconductor gases; and industrial gas production and quality assurance. For these applications and more, turn to AMETEK Process Instruments’ Model 5800 Moisture Analyzer. The Model 5800 offers a truly remarkable combination of performance benefits: exceptional accuracy, multi-gas compatibility, fast response...

  • AMETEK PI - Model 5812 - Moisture Analyzer

    AMETEK PI - Model 5812 - Moisture Analyzer

    Measuring moisture in natural gas is not a difficult application, but reliably measuring on a continuous basis is. Glycols and entrained compressor oils can quickly contaminate or damage most moisture sensors. In addition, many moisture analyzers have no means to detect the presence of such contamination, leading to inaccurately monitored or completely unmonitored gas streams.

  • AMETEK PI - Model 5830 - Moisture Analyzer

    AMETEK PI - Model 5830 - Moisture Analyzer

    Building upon the success of our quartz-crystal moisture measurement technology, AMETEK’s Model 5830 is an easy-to-use process moisture analyzer that offers a truly remarkable combination of performance features: exceptional accuracy, multi-gas compatibility, fast response speed, and wide measurement range.

  • AMETEK PI - Model 5910 UHP - Moisture Analyzer

    AMETEK PI - Model 5910 UHP - Moisture Analyzer

    The Model 5910 provides a quantum leap forward in performance across all measurable parameters. The 5910 is sensitive to changes in moisture concentration of less than 500 pptv. We know this because the nominal noise level is below 50 pptv. The result of these phenomenal abilities is an accuracy of better than ±100 pptv or ±10% of reading.

  • AMETEK PI - Model 5920 UHP - Moisture Analyzer

    AMETEK PI - Model 5920 UHP - Moisture Analyzer

    Building upon the success of our quartz-crystal moisture measurement technology, AMETEK’s Model 5920 is an easy-to-use process moisture analyzer that offers a truly remarkable combination of performance features: multi-gas compatibility,  exceptional accuracy, on-line verification, fast response speed, and wide measurement range. The 5920 is ideal for critical moisture measurement applications including high purity gas production and...

  • Western Research

    A wide range of standard and custom-built industrial UV-Vis photometric analyzers for various chemical composition analyses of inert, reactive, and toxic gases or liquids. Used to monitor or control: feedstock quality, reaction rates, quality control/assurance, blending analysis, pollutants, etc.

  • AMETEK PI - Model WR-888 - Sulfur Recovery Unit (SRU) Analyzers

    AMETEK PI - Model WR-888 - Sulfur Recovery Unit (SRU) Analyzers

    AMETEK Process Instruments has been the leader in tail gas analysis for over 40 years-with more than 1,100 installed model 880 NSL analyzers and more than 100 million hours of run time. The Model 888, the successor of the 880 NSL uses field-proven and highly reliable UV technology to accurately monitor the H2S and SO2 concentrations in sulfur recovery tail gas. This compact,...

  • AMETEK PI - Model 292B - Portable Natural Gas Chromatograph

    AMETEK PI - Model 292B - Portable Natural Gas Chromatograph

    The production and custody transfer of natural gas require accurate measurement of the composition of the gas. Many contractual requirements define the desired composition, heating value and relative density of the gas being sold or transported. Portable gas analysis of the critical components in natural gas ensures reliable results when installation of stationary analyzer is impractical or costly.

  • FlarePro - Process Mass Spectrometer

    FlarePro - Process Mass Spectrometer

    Fast, Accurate Determination of Flare Gas Heat Value by Process MS. New rules for flare stack combustion from the US Environmental Protection Agency (EPA) set to take effect in early 2019 include additional monitoring and analysis requirements that make it necessary for refinery operators to quickly and accurately determine the heat values of flare stack gases. Determining the heating values of vent gas is important because sufficient combustible...