19 products found
Products by ENVEA
-
Process Optimization - Velocity
Velocity measurement in processes is becoming increasingly important to accurately detect the conveying speed of materials: for monitoring the conveying element or to regulate a careful material transport.
-
ENVEA - Model SpeedFlow 2.0 - Pipe Velocity Measurement, Material Transport Sensor
Velocity measurement in full cross-section version. Continuous velocity measurement in tube version for careful material transport. Measures in full ...
-
Process Optimization - Gas Monitors - Measured Parameter - CO
Continuous measurement of specific gases (raw gas) at high concentrations are used in the optimization of processes, as for example in the flue gas treatment, and that required a fast response time to allow process regulation and reagent saving.Control Emissions Earlier in the Process– With the changes to regulatory ELVs, the control of emissions within the exhaust stack is no longer enough to ensure compliance. Raw gas measurement presents the opportunity to manage the level of pollutants in the gas stream process by using abatement control more efficiently.
-
ENVEA - Model MIR 9000H - Heated Multi-Gas NDIR-GFC Analyzer
Perfect ammonia gas analyzer or multi-gas analyzer for the measurement in hot & wet flue-gas of: HCl, HF, NH3, NO, NO2, N2O, SO2, CO, CO2, O2 and ...
-
Process Optimization - Filter Performance Monitors
Multi-chamber bag filters are becoming increasingly common to effectively contain and measure particulates. The baghouse is equipped with hundreds of filter bags. Enhanced performance baghouse filter detectors are deployed in multi-compartment baghouses to pre-empt the deterioration of dust filters.
-
ENVEA - Model Leak Locate 662 - Filter Performance Monitors
The LEAK LOCATE 662 is a digitally networked, multi-compartment baghouse monitoring system providing remote observation of the condition of bag and cartridge filters. Controller based filter dust leak monitor (0-100%) for filter emissions monitoring after bag houses, cartridge filters, cyclones ...
Process - Dust Monitors
ENVEA - Model PCME DM 170 - Light Scatter Particulate Emissions Monitor
The DM 170 is designed to comply with the TÜV suitability testing scheme to EN 15267 and for measuring dust concentrations in a wide range of industrial ...
ENVEA - Model PCME QAL 260 - MCERTS Approved Back Scatter Particulate CEM
MCERTS QAL1 approved, stand alone or multi-sensor Particulate CEM providing high quality emission measurement for low dust concentrations from dry industrial ...
ENVEA - Model PCME VIEW 580 - Dynamic Opacity Dust Monitor
Stand alone Cross Stack optical dust monitor suitable for measuring emissions after electrostatic precipitators and stacks without filtration systems. Used for emissions measurement (mg/m³) after electrostatic precipitators and baghouses or Process control applications. Advanced sensor design includes automatic drift (zero and span) ...
ENVEA - Model PCME VIEW 800 - ElectroDynamic Multi-Sensor Dust Monitor
Multi-Sensor Dust Monitor certified to category 1 under ATEX / IECEx designed for indicative emissions trending and measurement in challenging hazardous zone. Advanced Probe Electrification technology, perfectly adapted for particulate monitoring after bag filters, cartridge filters, cyclones and process driers, where regulatory approvals are not ...
ENVEA - Model Dusty - Filter Damage Monitoring
Dusty is a filter monitor that works on a triboelectric ...
ENVEA - Model PCME DM 170 - Backscatter Dust Measurement
DM 170 is a backscatter particulate measurement sensor for measuring dust ...
Emissions - Permanent Samplers
ENVEA - Model Amesa-B - Continuous Monitoring of Biogenic CO2‚ Emissions
Biogenic or carbon-neutral stack CO2 gas can be deductible from any company’s greenhouse gas inventory which is required for reporting under various ...
ENVEA - Model Amesa-M - Mercury Sorbent Trap System
Meets the US EPA Performances Standard 12 B mentioned in the US Portland Cement Rules and the new MATS (Mercury and Air Toxics ...
Ambient - Air Quality Gas Monitors - VOC
ENVEA - Model VOC72e - Volatil Organic Compounds Analyzer BTEX
Gas chromatography (GC) coupled with a PID detector. VOC monitor QAL1 certified to EN 14662-3 standard for benzene measurement. Compact and fully automated analyser providing equal performance to the laboratory chromatographs; particularly well-suited for fixed or mobile ambient air quality monitoring stations. Standard measured compounds: Benzene, Toluene, Ethylbenzene, m+p-Xylene, o-Xylene, 1-3 Butadiene (other compounds on ...
Industrial Emissions Monitoring - Multi-Gas Monitoring Systems - CEMS
ENVEA - Model MIR 9000P - Portable stack testing multi-gas analyzer NDIR-GFC
The ENVEA MIR 9000P belongs to the new generation of ENVEA gas monitors, showcasing eco-design, IoT and on board intelligence. It measures simultaneously 8 gases – NOx, SO2, CO, CO2, CH4, N2O, O2 and residual H2O – and uses the non-dispersive infrared method (NDIR-GFC) with gas filter correlation. O2 is measured by a built-in SRM paramagnetic sensor. The ...
Filter Dust / Leak Monitors
ENVEA - Model PCME DM 210 - Filter Dust / Leak Monitors
The PCME DM 210 comprises a single compact sensor design with integrated user interface for reliable and robust particulate monitoring for all types of industrial processes. Additional functionality allows the instrument to measure defined units (mg/m³) with QA checks if required by the Process Operator or ...
ENVEA - Model PCME LEAK ALERT 73 - Compact Sensor for Dust Measurement
LEAK ALERT 73 is a compact sensor for electrodynamic filter damage and leakage monitoring in industrial filter ...
ENVEA - Model PCME LEAK ALERT 75/80 - TÜV Approved Sensor for Dust Measurement
LEAK ALERT 75/80 was specially developed to carry out electrodynamic filter damage and leakage monitoring in industrial filter ...
Products by Icon Scientific Limited
-
Downstream
-
FreezePoint - Model FZ - Ambient Temperature Analyser System
Determines the lowest ambient temperature at which aviation jet fuel can be safely used. Freeze Point delivers reliable measurements for freeze points as low as ...
-
Model VO - Viscosity Analyser System
Viscometer’s flexible operation means a range of petroleum products can be measured within the repeatability criteria of ASTM D445, including lube oils, lube oil stocks, biodiesel and fuel oils. Kinematic viscosity may also be ...
-
Midstream
-
Model Vp - Vapour Pressure Analyser System
An essential measurement of fuel volatility for gasoline, crude, condensate, LNG and LPG production. Icon's Vapour Pressure analyser measures the vapour pressure held in equilibrium above a liquid, at a user-specified temperature and vapour-liquid ...
