On-Line Water Analyzers Products and Equipment from AppliTek ...

AppliTek TitriLyzer - Series of On-Line Titrimetric Analyzers

Titration involves determining the analyte(s) of interest by the addition of accurately known volumes of standardized titrant to a sample solution. The TitriLyzer Series of On-line Titrimetric Analyzers are state of the art titration systems equipped with a high precision dispenser system and other quality components, available at an attractive price/quality ratio.

TitriLyzer - Model TH + Alk - On-Line Total Hardness + Alkalinity Analyzer

The TitriLyzer Series of On-line Titrimetric Analyzers are state of the art titration systems equipped with a high precision dispenser system and other quality components, controlled by AppliTek’s UPAMATIC controller software. Ease-of-use, robustness and analytical performance are key to each and every model of the TitriLyzer Series, available at an...

TitriLyzer - Model EX Series - Series of On-Line Titrimetric Analyzers

The TitriLyzer EX Series are special explosion proof configurations of our TitriLyzer Series designed for industrial water analysis applications in hazardous areas and harnessing many features and techniques that were originally developed for our industrial, state of the art process analyzers.

AppliTek EnviroLyzer - Series of On-Line Colorimetric Analyzers

TheEnviroLyzer Series are essentially on-line colorimeters for water applications, harnessing many features and techniques that were originally developed for our industrial, state of the art process analyzers.

AppliTek EnviroLyzer - Model ISE Series - On-Line Water Analyzers System

The EnviroLyzer ISE Series are water analyzers designed for a specific set of water applications where ion-selective electrodes are the preferred analytical technique. Contrary to separate electrodes, the ISE Series allow to perform measurements in batch.

EnviroLyzer - Model EX - Series of On-Line Colorimetric Analyzers

The EnviroLyzer EX Series are special explosion proof on-line analyzers designed for industrial water analysis applications in hazardous areas and harnessing many features and techniques that were originally developed for our industrial, state of the art process analyzers.

AppliTek EnviroLyzer - Model Cr - On-Line Chromium Analyzer

The EnviroLyzer Cr has been developed in order to set new standards in automatic, compliant, on-line monitoring of Cr(VI) or total Cr in water, exceeding today’s most stringent regulations for permissible chromium levels. The EnviroLyzer Series are essentially on-line colorimeters for water applications, harnessing many features and techniques that were originally developed for our industrial, state of the art process analyzers. The flexible...

EZ-Charge - On-Line Charge Density Analyzer

The EZ-Charge On-line Charge Density Analyzer is an on-line analyzer built on AppliTek’s advanced titrator mainframe and specifically designed for the purpose of dosing control in chemical separation processes. The result output of the on-line analyzer can be compared against a specific setpoint, if necessary with alarm thresholds, so that the right amount of chemicals can be dosed at the right...

EZ-Autocal - Model pH - Ex Situ pH Metering

The EZ-AutoCal pH assures fully automatic, accurate and reproducible pH measurements in a myriad of liquid applications where operators need to conduct routine measurements on a daily or even hourly basis. The analyzer performs measurements out of the process (ex situ) and batchwise, meaning that once the measurement is done and analysis results are recorded, the analyzer will immediately start...

IBULyzer - Determination of Beer Bitterness Units

The IBULyzer is a cost-effective analyzer that was developed to automate the manual iso-octane extraction method for bitterness tests on a large number of sampling points. The beer analyzer complements internal brewery quality control procedures allowing to brew each time that same unique beer, yet with tight control over the IBU values.

SulPhos - On-Line Water Analyzer System

SulPhos is an on-line water analyzer providing operators of small to mid scale steam boilers an objective and measurable basis to control and adjust boiler chemistry. Levels of active components of sodium sulphite / metabisulphite and sodium phosphate are monitored in real-time, resulting in reduced risk of failures and a significant reduction in chemicals and costs related to energy and water. The analyzer system...

AppliTek Ra-TOX - On-Line Toxicity Analyzer

The Ra-TOX is able to detect and measure wastewater streams that present an acute or chronic toxicity to the biomass of a treatment plant. This allows operators to take corrective measures to protect the viability of the waste water treatment plant, e.g. by storing the toxic water in a buffer tank. With a response time of 15 minutes, toxic compounds present in the wastewater can be detected in an early stage by the...

AppliTek TOPHO - On-Line Total Phosphorus Analyzer

The unique character of theTOPHO On-line Total Phosphorus Analyzer allows operators of industrial and municipal water works to monitor and control in a convenient way the total portion of phosphorous. The analyzer shares similar wet-chemical oxidation techniques that are used for theTONI®On-line Total Nitrogen Analyzer. It runs a chemical analysis based on standard method 4500-P with ascorbic acid reduction and molybdate color solution after...

AppliTek TONI - On-Line Total Nitrogen Analyzer

The TONI On-line Total Nitrogen Analyzer meets the needs for fast and reliable monitoring of the regulatory sum parameter Total Nitrogen in all sorts of water bodies. The quantification of Total Nitrogen has traditionally been done by means of the time-consuming and complex (total) Kjeldahl method, developed primarily for organic nitrogen. The water analyzer runs a chemical analysis based on standard method 4500-N with hydrazine reduction and NEDD...

AppliTek AnaSense - On-Line Anaerobic Control Analyzer

AnaSense is an on-line analyzer system designed specifically for monitoring anaerobic digesters, bringing the possibility of implementing new control alternatives to typical operating problems in anaerobic processes in mid to large scale digesters. The primary process parameter that can be measured is total volatile fatty acids (VFA). VFA levels directly represent the metabolic condition of the anaerobic digester and respond quickly to stress induced...

AppliTrace - Series of Trace Metal Analyzers

The AppliTrace Series have been developed for companies and authorities wishing a cost-effective solution for trace metal (heavy metal) monitoring relative to environmental pollution and/or discharge compliance. For many metals the analyzer boasts limits of detection (LOD) in the low ppb to high ppt range, comparing the ASV technique favorably with AAS or ICP analysis. ASV is also insensitive to the typical interference from which colorimetric...

AppliTrace - Model Duo - Series of Trace Metal Analyzers

The AppliTrace Series have been developed for companies and authorities wishing a cost-effective solution for trace metal (heavy metal) monitoring relative to environmental pollution and/or discharge compliance. For many metals the analyzer boasts limits of detection (LOD) in the low ppb to high ppt range, comparing the ASV technique favorably with AAS or ICP analysis. ASV is also insensitive to the...

EZ-ATP - On-Line Microbiology Analyzer

The EZ-ATP monitors total bacterial and pathogen load in water by measuring portions of ATP (adenosine triphosphate) of any type of bacterial microorganism present in the water sample. These may include fecal coliforms such as E. coli, sulphate reducing bacteria, nitrifying bacteria or Legionella. The analyzer can be used as an Early Warning System in various applications with focus on water safety, when high ATP values...

AppliTek NIPHO - On-Line Total Nitrogen+Phosphorus Analyzer

The newly developed NIPHO On-line Total Nitrogen+Phosphorus Analyzer facilitates rapid, convenient analysis of regulatory sum parameters in effluent, river water and ground water. The water analyzer runs two different analysis cycles for the simultaneous measurement of TN and TP. Proprietary sample oxidation techniques convert all N and P species into NO3 and PO4, yet completely automated and without risks imposed on operators....

AppliTek AppliCOD - Series of On-Line COD Analyzers

The AppliCOD Series of On-line COD Analyzers are built on probably the most advanced and versatile analytical mainframe available for measuring COD values in water, bringing new levels of automation, reliability and performance.

AppliCOD - Model MW - Series of On-Line COD Analyzers

The AppliCOD Series of On-line COD Analyzers are built on probably the most advanced and versatile analytical mainframe available for measuring COD values in water, bringing new levels of automation, reliability and performance. All AppliCOD Series share similar high quality components, such as our long-life peristaltic pumps and precision micro pumps, and the same analytical techniques.

AppliTek AppliTOC - Series of On-Line Total Organic Carbon (TOC) Analyzers

Total Organic Carbon analysis has been classified as a non-specific analysis method to determine the organic load in water. Its inherent accuracy and speed, combined with a low cost of ownership make it a preferred (standard) analysis method in many countries and industries. The AppliTOC Series of On-line TOC Analyzers have been field-tested for many years in a wide range of applications and environments...

AppliTek Ra-COMBO - Laboratory Respirometric Analyzer

The Ra-COMBO is a renowned respirometric at-line analyzer for conducting semi-automated analysis on the biological activity of activated sludge. The system basically measures the respiration rate (expressed as mg O2/l.h), one of the most important parameters for the biological activity of activated sludge. The analyzer determines short-term Biological Oxygen Demand (BODst) and toxicity (organic / inorganic inhibition) on grab...

AppliTek NV Products

On-Line Water Analyzers