Atmoservice

80 products found

Products by ENVEA

  • Process - Flow Measurement

  • ENVEA - Model DensFlow - Flow Metering in Dense-Stream

    ENVEA - Model DensFlow - Flow Metering in Dense-Stream

    The measuring system for continuous flow metering in dense-stream conveying and high levels of throughput. Reliable flow metering in pneumatic dense-stream. Unlimited throughput volumes can be measured. optionally pressure-resistant up to 25 bar. Installation creates no obstacle in the profile, hence no dead spots in which residue can form. Measurement independent of the flow speed of the material. Simple retrofitting. Maintenance-free. Contactless...

  • Process - Flow Detection

  • ENVEA - Model FlowJam-A - Material Flow Monitoring on Flexible Hoses

    ENVEA - Model FlowJam-A - Material Flow Monitoring on Flexible Hoses

    Material flow monitoring on flexible hose lines for small quantities. FlowJam A is a sensor which has been specially developed for monitoring the flow of solids conveyed by hose lines. The system can be applied to hose lines made of non-conducting materials such as plastic or rubber with external diameters of between 2 and 10 mm.

  • Process - Moisture measurement

  • ENVEA - Model M-Sens WR - Online Residual Moisture Measurement

    ENVEA - Model M-Sens WR - Online Residual Moisture Measurement

    Sensor for continuous moisture measurement in dry bulk solids. Sensors for continuous moisture measurement and installation on conveyor belts, screw feeder or hoppers. Two types of sensor-technology to cover a wide range of applications. Both sensors penetrate the product for most reliable measurements.

  • Process - Velocity measurement

  • ENVEA - Model SpeedFlow 2.0 - Velocity Measurement for Solids

    ENVEA - Model SpeedFlow 2.0 - Velocity Measurement for Solids

    Continous speed measurement for solids usable in free fall and pneumatics. Especially designed for continuous measurement of velocity of solids and particles such as granulates, powders and dusts, which are transported in free fall or in pneumatic transport. Uses triboelectric correlation technology.

  • Process - Level Monitoring

  • Process - Emissions Gas Monitors

  • ENVEA - Model LAS 300 XD - In-Situ Cross-Duct TDLAS Analyzer

    ENVEA - Model LAS 300 XD - In-Situ Cross-Duct TDLAS Analyzer

    TDL monitor for in-situ non-invasive measurement of NH3 & H2O, HCl & H2O, HF as well as low or high concentrations of CO and O2 in process or CEMS applications. The Tunable Diode Laser Spectroscopy (TDLS) is the perfect technology to use when you are looking for a selective measurement and a fast response time on some gas components as NH3, HCL, HF or even O2 when conditions are too rough for standard O2 Zirconia In-Situ analysers.

  • Process - Filter Performance Monitors

  • ENVEA - Model DUST ALARM 40 - Filter Damage Monitoring

    ENVEA - Model DUST ALARM 40 - Filter Damage Monitoring

    DUST ALARM 40 was specially developed to monitor clean sides after filters reliable and without time delay regarding filter breaks: immediate detection of filter damages. to avoid process-induced DustEx-areas. detects all dust types. usable in clean gas and dust channels. very simple and fast retrofitting. simple, icon-driven menu. 2 independent alarm set points. expandable to 4 ... 20 mA output (trend signal).

  • Process - Broken Bag Detection

  • ENVEA - Model Dusty C - Compact Sensor for Broken Bag Detection

    ENVEA - Model Dusty C - Compact Sensor for Broken Bag Detection

    Continuously monitors particulate flow for signs of filter damage or broken filter bags. Compact and cost effective. The Dusty C has been specially developed to monitor clean sides after filters with high reliability and without time delay for filter breaks. It can be used in metallic ducts in which dust particles will be detected in the gas flow. Its area of application begins at dust levels of 0.1 mg/m3.

  • ENVEA - Model Dusty - Broken Bag Detection

    ENVEA - Model Dusty - Broken Bag Detection

    Cost effective broken bag detection. A simple solution to identify failure of a fabric filter baghouse, cartridge filters or cyclones.Ideally suited to applications from 0.1 mg/m3, it provides an immediate alarm in case of a filter break.

  • Process - Dust Monitors

  • ENVEA - Model PCME VIEW 580 - Dynamic Opacity Dust Monitor

    ENVEA - Model PCME VIEW 580 - Dynamic Opacity Dust Monitor

    Stand alone Cross Stack optical dust monitor suitable for measuring emissions after electrostatic precipitators and stacks without filtration systems. Used for emissions measurement (mg/m³) after electrostatic precipitators and baghouses or Process control applications. Advanced sensor design includes automatic drift (zero and span) checks.

  • ENVEA - Model PCME VIEW 273 - ElectroDynamic Dust Monitor

    ENVEA - Model PCME VIEW 273 - ElectroDynamic Dust Monitor

    Multi-sensor dust monitor for indicative emissions trending in industrial stacks after bag filters, cartridge filters, cyclones and process driers, where regulatory approvals are not necessary. Advanced Probe Electrification featuring long term data logging for process trend analysis and reporting.

  • ENVEA - Model PCME VIEW 820 - ElectroDynamic Dust Monitor

    ENVEA - Model PCME VIEW 820 - ElectroDynamic Dust Monitor

    Certified Multi-sensor dust monitor – category 1 under ATEX / IECEx – for indicative emissions trending and measurement in hazardous zone and in dry processess with elevated pressures. Advanced Probe Electrification featuring long term data logging for process trend analysis and reporting.

  • ENVEA - Model PCME VIEW 800 - ElectroDynamic Multi-Sensor Dust Monitor

    ENVEA - Model PCME VIEW 800 - ElectroDynamic Multi-Sensor Dust Monitor

    Multi-Sensor Dust Monitor certified to category 1 under ATEX / IECEx designed for indicative emissions trending and measurement in challenging hazardous zone. Advanced Probe Electrification technology, perfectly adapted for particulate monitoring after bag filters, cartridge filters, cyclones and process driers, where regulatory approvals are not necessary.

  • ENVEA - Model ProSens - Dust Measurement After Filters

    ENVEA - Model ProSens - Dust Measurement After Filters

    Provides continuous measurement values for dust concentration as a trend signal or absolute values. The ProSens has been specially developed to carry out reliable dust measurement on clean sides after filters. The measuring device provides measurement values for dust concentration, either as a trend signal or as absolute values (after calibration) for emission measurement.

  • ENVEA - Model PCME LEAK LOCATE 320 - Filter Damage and Leak Monitoring

    ENVEA - Model PCME LEAK LOCATE 320 - Filter Damage and Leak Monitoring

    Electrodynamic filter damage and leakage monitoring of industrial multi chamber filter systems: proactive multi chamber filter monitoring, identification of upcoming filter damages, identification of the filter chamber affected by filter breakage, reduction of material-, downtime- and maintenance costs, flue-gas temperatures up to 150 °C (optional 250 °C), for dry applications, 4 sensors inclusive, expandable up to 32 sensors, digital inputs...

  • Process - Particle Size Monitoring

  • ENVEA - Model Paddy - Particle Size Monitoring

    ENVEA - Model Paddy - Particle Size Monitoring

    Paddy has been developed to supply a trending information of pulverization. It measures changes in particle size for instance to detect screen breaks. Paddy is insensitive against contaminations and works without a bypass.

  • Process - Mercury Instruments

  • Emissions & Process - Gas Monitors

  • ENVEA - Model SM-4 - Total Mercury Emissions Monitor in Stack Flue Gases

    ENVEA - Model SM-4 - Total Mercury Emissions Monitor in Stack Flue Gases

    Continuous, accurate and reliable measurement of total mercury emissions, even in very low concentrations and within complex matrices (SO2, NOx, HCl, etc.). With over 20 years experience, Mercury Instruments (part of ENVEA Group) were the first to develop mercury monitors and mercury analyzers using a dry thermocatalytic method instead of wet chemistry. The SM-4 Mercury Monitor is QAL1 certified and is ready to meet future regulatory ...

  • Emissions - Particulate CEMS

  • ENVEA - Model PCME STACK 181 - PS11 Capable Forward Scatter Particulate CEM

    ENVEA - Model PCME STACK 181 - PS11 Capable Forward Scatter Particulate CEM

    US EPA PS11 compliant ProScatter™ particulate CEM providing high quality emission measurement for low dust concentrations from industrial processes. Utilising the patented ProScatterTM Forward Scatter measurement technique for measuring particulate concentration levels, typically between 0.06 mg/m3 to 300 mg/m3, this measurement technique offers improved levels of performance which make the PCME STACK 181 very suitable for use as a PM CPMS or PM...

  • Emissions - Permanent Samplers

  • Emissions - Sampling Systems

  • ENVEA - Model MVS - Multiplexing CEMS Management System

    ENVEA - Model MVS - Multiplexing CEMS Management System

    MVS 2M is a multichannel system allowing to distribute two, three or four channels of fluids and signals to a gas monitoring system (GMS). Its function is to link the GMS with the sampling systems for gas and span gas, and to allow the redundancy function.

  • Emissions - Engine Exhausts Monitoring

  • ENVEA - Model LGD 2M - Laser Gas Detection Module NH3 (TDLS)

    ENVEA - Model LGD 2M - Laser Gas Detection Module NH3 (TDLS)

    Rack 3U monitor using the TDL extractive technology to measure online the NH3 pre and/or post catalyst: SCR (Selective Catalytic Reduction) or SNCR (Selective Non-Catalytic Reduction) ENVEA is offering Laser Gas Detection (LGD) modules with exceptional advantages and value for the customer. Tunable Diode Laser Spectrometry (TDLS), enhanced by proprietary technology, is used for the measurement of CO2, NH3, CH4, HCl, (H2O).

  • Ambient - Air Quality Gas Monitors - O3

  • ENVEA - Model Cairnet 2015 - Autonomous Networks of Sensor-Based Mini-Stations

    ENVEA - Model Cairnet 2015 - Autonomous Networks of Sensor-Based Mini-Stations

    Real-time standalone and networkable air-monitoring station containing up to four Cairsens® microsensors and cellular communication within a waterproof & solar powered enclosure. Following in real-time any given pollutant emissions data directly from your office, via your computer, smartphone or tablet? All the data centralized in the Cloud, with minimum operating costs (no maintenance, no visit on site to retrieve the data…)? Cairnet...

  • Ambient - Air Quality Gas Monitors - VOC

  • ENVEA - Model VOC72e - Volatil Organic Compounds Analyzer BTEX

    ENVEA - Model VOC72e - Volatil Organic Compounds Analyzer BTEX

    Gas chromatography (GC) coupled with a PID detector. VOC monitor QAL1 certified to EN 14662-3 standard for benzene measurement. Compact and fully automated analyser providing equal performance to the laboratory chromatographs; particularly well-suited for fixed or mobile ambient air quality monitoring stations. Standard measured compounds: Benzene, Toluene, Ethylbenzene, m+p-Xylene, o-Xylene, 1-3 Butadiene (other compounds on request).

  • Ambient - Hg Monitors - Mercury

  • ENVEA - Model Mercury Tracker-3000 XS - All-in-One Portable Real-Time Hg Monitor

    ENVEA - Model Mercury Tracker-3000 XS - All-in-One Portable Real-Time Hg Monitor

    Very small, ultra-light, with on-board GPS, data logger, battery pack and color TFT display for very comfortable and easy mercury monitoring in ambient air and other gases. Portable mercury monitoring and detection is made easy with the Mercury Tracker 3000 XS. Lightweight, rugged construction and compact, the instrument is perfect for indoor and outdoor screening of mercury concentration in ambient air and detecting mercury...

  • Ambient - Air quality monitoring & Laboratory Mercury Instruments

  • ENVEA - Model UT-3000 NG - Mobile Mercury Ultratrace Analyzer for Natural Gas

    ENVEA - Model UT-3000 NG - Mobile Mercury Ultratrace Analyzer for Natural Gas

    Perfectly adapted to monitor the efficiency of different Mercury Removal Units (MRUs) in natural gas processing plants. Each mercury on-line system will differ in sample characteristics as well as installation conditions and operating environment. We have the experience to design systems that fully meet the requirements of your particular mercury monitoring task.

  • ENVEA - Model MMS-NG - Automatic Mercury Monitoring in Natural Gas

    ENVEA - Model MMS-NG - Automatic Mercury Monitoring in Natural Gas

    Automatic systemdesigned for continuous mercury monitoring in natural gas even in hazardous zones (ATEX, IEC-Ex). Each mercury on-line system will differ in sample characteristics as well as installation conditions and operating environment. We have the experience to design systems that fully meet the requirements of your particular mercury monitoring task.

  • ENVEA - Model UT-3000 - Total Gaseous Mercury (TGM) Ultratracer

    ENVEA - Model UT-3000 - Total Gaseous Mercury (TGM) Ultratracer

    Measuring of Total Gaseous Mercury (TGM) in air and other gases. Reliable for measurements at ultra-trace levels (sub-ng/m³) according to EN 15852. The UT-3000 operates automatically. All functions are controlled by an embedded microprocessor. When measurements are carried out, all parameters and results are stored in the integrated data logger. With standard settings the data logger has a recording capacity of 5000 measurements (approx. 2...

  • Ambient - Odors detection & Air quality monitoring Micro-Sensors

  • ENVEA - Model Cairsens PM - Miniature Solution for Real-Time Continuous PM1, PM2.5 & PM10 Monitoring

    ENVEA - Model Cairsens PM - Miniature Solution for Real-Time Continuous PM1, PM2.5 & PM10 Monitoring

    The last generation of Cairsens micro-sensors for Particulate Matters (PM) monitoring operates without any influence from moisture in ambient air. They measure PM1 and PM10 concentrations, with increased precision for PM2.5. The Cairsens allows a year of continuous maintenance-free operation, even in highly polluted and humid atmospheres. Thanks to its robust and miniature design, it is fully compatible with ENVEA’s turnkey AQMS station Cairnet....

  • ENVEA - Model Cairsens nmVOC - Miniature Solution for Real-Time Continuous nmVOC Monitoring

    ENVEA - Model Cairsens nmVOC - Miniature Solution for Real-Time Continuous nmVOC Monitoring

    The Cairsens© sensor allows specific pollutant measurement comparable to reference methods. The high quality sensors are renowned worldwide by our customers looking for the newest technologies in air quality monitoring. They offer precise and reliable measurement, and are calibrated using a reference-standard value.  They come with a unique calibration certificate and don’t need any more calibration after installation during their...

  • ENVEA - Model Cairsens NH3 - Miniature Solution for Real-Time Continuous NH3 Monitoring

    ENVEA - Model Cairsens NH3 - Miniature Solution for Real-Time Continuous NH3 Monitoring

    The Cairsens© sensor allows specific pollutant measurement comparable to reference methods. The high quality sensors are renowned worldwide by our customers looking for the newest technologies in air quality monitoring. They offer precise and reliable measurement, and are calibrated using a reference-standard value.  They come with a unique calibration certificate and don’t need any more calibration after installation during their...

  • ENVEA - Model Cairsens H2S / CH4S - Miniature Solution for Real-Time Continuous H2S / CH4S Monitoring

    ENVEA - Model Cairsens H2S / CH4S - Miniature Solution for Real-Time Continuous H2S / CH4S Monitoring

    The Cairsens© sensor allows specific pollutant measurement comparable to reference methods. The high quality sensors are renowned worldwide by our customers looking for the newest technologies in air quality monitoring. They offer precise and reliable measurement, and are calibrated using a reference-standard value.  They come with a unique calibration certificate and don’t need any more calibration after installation during their...

  • ENVEA - Model Cairsens CO - Miniature Solution for Real-Time Continuous CO Monitoring

    ENVEA - Model Cairsens CO - Miniature Solution for Real-Time Continuous CO Monitoring

    The Cairsens sensor allows specific pollutant measurement comparable to reference methods. The high quality sensors are renowned worldwide by our customers looking for the newest technologies in air quality monitoring. They offer precise and reliable measurement, and are calibrated using a reference-standard value.  They come with a unique calibration certificate and don’t need any more calibration after installation during their lifetime (12...

  • ENVEA - Model Cairsens NO2 - Miniature Solution for Real-Time Continuous NO2 Monitoring

    ENVEA - Model Cairsens NO2 - Miniature Solution for Real-Time Continuous NO2 Monitoring

    The Cairsens© sensor allows specific pollutant measurement comparable to reference methods. The high quality sensors are renowned worldwide by our customers looking for the newest technologies in air quality monitoring. They offer precise and reliable measurement, and are calibrated using a reference-standard value.  They come with a unique calibration certificate and don’t need any more calibration after installation during their...

  • ENVEA - Model Cairsens O3 / NO2 - Miniature Solution for Real-Time Continuous O3 / NO2 Monitoring

    ENVEA - Model Cairsens O3 / NO2 - Miniature Solution for Real-Time Continuous O3 / NO2 Monitoring

    The Cairsens sensor allows specific pollutant measurement comparable to reference methods. The high quality sensors are renowned worldwide by our customers looking for the newest technologies in air quality monitoring. They offer precise and reliable measurement, and are calibrated using a reference-standard value.  They come with a unique calibration certificate and don’t need any more calibration after installation during their lifetime...

  • ENVEA - Model Cairsens SO2 - Miniature Solution for Real-Time Continuous SO2 Monitoring

    ENVEA - Model Cairsens SO2 - Miniature Solution for Real-Time Continuous SO2 Monitoring

    The Cairsens© sensor allows specific pollutant measurement comparable to reference methods. The high quality sensors are renowned worldwide by our customers looking for the newest technologies in air quality monitoring. They offer precise and reliable measurement, and are calibrated using a reference-standard value.  They come with a unique calibration certificate and don’t need any more calibration after installation during their...

  • ENVEA - Model Cairnet 2020 - Autonomous Networks of Sensor-Based Mini-Stations

    ENVEA - Model Cairnet 2020 - Autonomous Networks of Sensor-Based Mini-Stations

    Cairnet® device is a real-time standalone and networkable air-monitoring station containing up to 6 Cairsens® microsensors and cellular communication within a waterproof enclosure. Thanks to its integrated manifold allowing a dynamic sampling, the measures are accurate and reliable. Electronic compounds are sealed & protected from moisture and corrosive ambient air.

  • Ambient - Gas Generators / Calibrators

  • Mercury - Model CalSet - Manual Calibration Set for UT-3000

    Mercury - Model CalSet - Manual Calibration Set for UT-3000

    This accessory meant for manually calibrating the UT-3000 Mercury Ultratracer. The calibration unit is connected to the UT-3000 Ultratracer. With a special syringe a defined volume of mercury containing gas is drawn from the calibrator and injected into the calibration port of the UT-3000. After entering the volume of the injected gas, the UT-3000 will automatically calculate the mercury mass from the volume injected and the calibration cell...

  • ENVEA - Model AutoCal - Automatic Calibration Unit for UT-3000

    ENVEA - Model AutoCal - Automatic Calibration Unit for UT-3000

    This is an accesory for the UT-3000 Mercury Ultratracer in monitoring systems at low to intermediate mercury concentrations. The Mercury Instruments Automatic Calibration Unit consists of a specially designed mercury vessel containing elemental mercury of high purity, surrounded by an aluminium jacket cooled by a thermoelectric cooler. For automatic calibration a motor driven syringe extracts a defined volume of mercury saturated gas and feeds it to...

  • ENVEA - Model MC 3000 - Generation of Mercury Calibration Gas

    ENVEA - Model MC 3000 - Generation of Mercury Calibration Gas

    The MC-3000 generates a continuous stream of a mercury vapor loaded gas in order to check or calibrate mercury analyzers. An exactly adjustable carrier gas stream (normally air or nitrogen) is loaded with mercury in a first step. In a second step the gas is supersaturated by cooling. Subsequently the excess mercury is condensed in a special cell to get exact saturation. The gas is then diluted, the dilution ratio is continuously adjustable in order to...

  • Model NG 3000 - Sample Conditioning System for Natural Gas

    Model NG 3000 - Sample Conditioning System for Natural Gas

    The Natural Gas Sampling System 3000 is designed for very fast conditioning of samples from a pressurized natural gas source. Can be connected directly to a pipeline or a sampling cylinder containing compressed natural gas. The outlet of the sampling system can be connected directly to athe UT-3000 monitor for direct Hg analysis or connected to Tedlar® bags for posterior laboratory analysis.

  • Emission Monitoring - Dilution Based Stationary Monitoring Systems

  • ENVEA - Multi-Gas Dilution System

    ENVEA - Multi-Gas Dilution System

    Ideal for mid-high to high concentrations or for sampling locations in hazardous areas. The flue gas is extracted, filtered & diluted with clean / dry air, by an in-stack dilution probe, before being sent to the analyzer. This technique lowers the flue gas dew point, keeping the sample temperature above it and at ambient temperature, in order to eliminate all condensation issues (water interference-free). This also reduces the risk of...

  • Engine Gas Monitoring - Turnkey Multi-Gas Cabinet

  • Continuous Emissions Monitoring (CEM) of Hg in Stack Gas

  • ENVEA - Model SM-4 - Total Mercury Emissions Monitor in Stack Flue Gases

    ENVEA - Model SM-4 - Total Mercury Emissions Monitor in Stack Flue Gases

    Continuous, accurate and reliable measurement of total mercury emissions, even in very low concentrations and within complex matrices (SO2, NOx, HCl, etc.). With over 20 years experience, Mercury Instruments (part of ENVEA Group) were the first to develop mercury monitors and mercury analyzers using a dry thermocatalytic method instead of wet chemistry. The SM-4 Mercury Monitor is QAL1 certified and is ready to meet future regulatory ...

  • Filter Dust / Leak Monitors

  • ENVEA - Model PCME DM 210 - Filter Dust / Leak Monitors

    ENVEA - Model PCME DM 210 - Filter Dust / Leak Monitors

    The PCME DM 210 comprises a single compact sensor design with integrated user interface for reliable and robust particulate monitoring for all types of industrial processes.  Additional functionality allows the instrument to measure defined units (mg/m³) with QA checks if required by the Process Operator or Regulator.

  • Rugged Sensor Options

  • Rugged Sensor Options and Modules for Dust Monitors

    Rugged Sensor Options and Modules for Dust Monitors

    ENVEA UK has developed a range of rugged sensor options for its probe electrification instruments. These enable ENVEA UK's Electrodynamic™ particulate measurement range of instruments to be used in some challenging industrial applications and combine the benefits of an Electrodynamic™ measurement of dust (application dependent) with long term robust operation.

  • Process - Dust Measurement

  • Sensor Calibration Using the Dosed-Reference-Method

    Sensor Calibration Using the Dosed-Reference-Method

    The measurement result of the sensor is only as good as the reference to which it has been calibrated. For this reason we have developed the dosed-reference-method as an alternative to isokinetic dust sampling. The main basic idea of this is that a mass flow is dosed into the system which corresponds to a required concentration at a specific flow velocity.

Products by AMA Instruments GmbH

  • Online Gas Chromatographs

  • AMA - Model GC 5000 Series - Air Quality and Industrial Site Monitoring System

    AMA - Model GC 5000 Series - Air Quality and Industrial Site Monitoring System

    The GC 5000 series of gas chromatographs have been developed for the continuous monitoring of organic compounds. The instruments are characterized by their rugged and compact design and their outstanding detection sensitivity in the low ppb to ppt range. The instruments allow for cabinet/rack mounting in AQMS, containers and mobile vans for monitoring of air pollutants in unattended operation mode.

  • Calibrators

  • 19` Gas Generators

  • AMA - Model HG 300 and HG 500 - 19″ Hydrogen Generators

    AMA - Model HG 300 and HG 500 - 19″ Hydrogen Generators

    The HG 300 and HG 500 models of 19″ hydrogen generators offer high performance and reliable operation even under harsh operating conditions. Utilizing field proven PEM cell technology, hydrogen is produced from deionized water on demand only. Thus there is no need to use high pressure gas cylinders in monitoring stations and industrial installations anymore. This saves money and results in a high level of safety.

  • AMA - Thermal Desorption Systems

    AMA - Thermal Desorption Systems

    Thermal desorption has become a well established sample introduction technique for gas chromatography in order to determine volatile or semi-volatile organic compounds in air or gaseous samples and in solids. In case of gaseous samples the organic compounds to be analyzed will be collected on suitable adsorbent materials prior to analysis, whereas solid samples can be analysed directly by means of thermal desorption.

  • AMA - Sampling Units

    AMA - Sampling Units

    AMA Instruments offers a wide range of portable and automated sampling units performing high precision air and gas sampling. The sampling units are primarily used for indoor air monitoring, occupational health and safety monitoring or observation of legally required limits in industry or environment. While sampling an exactly defined air or gas volume will be drawn through special adsorption tubes, filters or washing bottles for subsequent laboratory...

Products by Durag Group

  • Ignition & Combustion- High Energy Igniters

  • Monitoring & Control - Flame Sensors

  • Monitoring & Control - Furnace Cameras

  • Durag - Model D-FS2 - Furnace Sensor

    Durag - Model D-FS2 - Furnace Sensor

    The digital furnace sensor D-FS2 delivers high definition live images directly out of the combustion chamber. The D-FS2 VIS with high resolution colour video is available as water or air cooled version. The furnace sensor D-FS2 is designed for the use with a retraction unit. All versions can be extended with the D-VTA 200 software to a thermography and analysis system. 

  • Measuring & Monitoring - Accessories

  • Durag - Model D-ISC 100 xx2 - Universal Operating Unit

    Durag - Model D-ISC 100 xx2 - Universal Operating Unit

    Universal display and operating unit in stainless steel field housing for connecting all new generation DURAG measuring systems. Ease your installation by combining several emission and flow measuring devices with only one operating unit. Realize redundant system setups with the D-ISC 100 easily and efficiently.

  • Measuring & Monitoring - Old Products

  • Durag - Model D-FL 200 - Volume Flow Measuring System

    Durag - Model D-FL 200 - Volume Flow Measuring System

    Ultrasonic measuring system to measure the velocity and the volume flow of flue gas or process gas in pipes or ducts. Please not that this product was discontinued on December 31st, 2014. Further details are given in the end of life notification.Repair at manufacturer site, remote and field...

  • Measuring & Monitoring - Air Flow Monitors

  • Durag - Model D-FL 220T - Ultrasonic Flow Velocity Monitor

    Durag - Model D-FL 220T - Ultrasonic Flow Velocity Monitor

    Measuring system for continuous evaluation of flow velocity and flow direction in tunnels. Ultrasonic sensors for tunnel ventilation control system. Reliable measurement across the tunnel profile. Two identical sensors alternately transmit and receive ultrasonic pulses. The system evaluates the transition times dependant on direction and calculates flow speed. D-FL 220T requires extremely low maintenance.

  • Measuring & Monitoring - Filter Monitoring

  • Durag - Model D-FW 231 - Filter Monitor

    Durag - Model D-FW 231 - Filter Monitor

    Filter monitor to detect the efficiency and function of filters and filtration systems. Dust Monitor for qualitative measurement of dust concentration in dry process or flue gas.

  • Measuring & Monitoring - Ambient Air Monitoring