10 products found
B W Innovative Produkte GmbH Products
-
NALTEC - Water Mist System
The NALTEC system is an easy-to-use technology for using the finest water mist for technical systems. The artificial water mist created by the NALTEC system has the same properties as the morning mist created by nature. It consists of super-fine, floating water droplets that wash the air clean, for example. These droplets are generated by specially developed pressure nozzles with only 10 bar water ...
-
MATAKT Air Cannons
MATAKT® air blast devices are used for the pneumatic activation of stored bulk goods. They prevent, for example, the formation of bridges in bunkers or silos, or also blockage and build-up in pipes, which are usually the reason why no more material can flow. B + W has developed the MATAKT® air blast devices to remove material jams and the associated malfunctions in various process systems. The large selection of MATAKT® components creates an individual readiness for use.
-
Matakt - Silo Bunker
To eliminate the fault, compressed air tanks or compressed air pipelines are attached to the outside of the corresponding funnel, silo or bunker walls using stable brackets. Holes of approx. 80 mm in diameter are drilled through the container walls near the low-flow zones. A 2 1/2 ″ pressure hose then creates the connection between the pressure vessel and the discharge nozzle, which is attached to the inside of ...
-
Matakt - Underfloor Extractor
To remove material jams , the specially developed MATAKT® 45 ° lance nozzles are mounted on the flat bottom around the fume cupboard . The pressure vessels belonging to the system are installed in the underfloor. The connection between nozzle and cannon is created by a 2 1/2 ″ pressure hose. A control cable is laid to control the valves and a 1/2 ″ compressed air line to the pressure vessels. The control unit addresses the firing ...
-
Matakt - Container
The air cannon is available as standard in various container variants : The most common sizes are 36, 66 and 100 liters, other containers can also be produced on request. The MATAKT® air cannons are not only variable in size. The containers can also be equipped with several and differently arranged blow-out valves, and the position and installation direction of the cannons is arbitrary. Therefore, it is possible to ensure optimal equipment for ...
-
Matakt - Lance Nozzle
With the MATAKT® lance nozzle, the air escapes from the side of the nozzle at the speed of sound, forms an air wedge and separates adhering material from the container wall. This allows the material to flow downwards again due to gravity. The effective range is approx. 1 meter to the left and right of the blow-out side. This results in a large effective range for activating the material. The lip seal on the blow-out slots prevents fine-grained ...
-
Flaer Scraper systems
-
Flaer - Head Wipers
The FLAER® head scraper is mounted on the discharge drum and is particularly suitable for extremely cramped construction conditions and strongly adhering materials. The individual hard metal angle scraper blades mounted on elastic spring arms achieve an optimal adaptation to the belt contour. The scraper blades can be adjusted to the belt with optimal contact pressure thanks to the lateral support of the support tube. This results in effective ...
-
FLAER - Main Scraper
The FLAER® main scraper is mounted on the head drum approx. 100 mm behind the discharge point of the conveyor belt. Due to its compact design, the transfer chutes can be kept small. The lateral mounting of the support tube also allows the scraper blades to be optimally adjusted to the belt. The FLAER® main scraper can be used at 90 ° for normal as well as reversing operation. The hard metal scraper blades mounted on rubber elements ensure high ...
-
Flaer - Model ST-FB / 100 - Main Wipers
The FLAER® main scraper is mounted on the head drum approx. 100 mm behind the discharge point of the conveyor belt. Due to its compact design, the transfer chutes can be kept small. The lateral support of the support tube also allows the scraper blades to be optimally adjusted to the belt. The FLAER® main scraper can be used at 90 ° for normal as well as reversing operation. The hard metal scraper blades mounted on rubber elements ensure high ...
-
Additives
-
Lipcoat - Model 100 - Dust Binder
The dust binder LIPCOAT ® 100 is a powder of organic polymers with a hygroscopic effect (binds moisture from the environment). This powder is dissolved in water and used against dust, for example on ...
-
Lipcoat - Model 103 - Atex-Like, Plastic-Based Liquid
The LIPCOAT ® 103 is a latex-like, plastic-based liquid that lies like a film over the treated surface. It is used to avoid the removal of material on passive dumps. To do this, the LIPCOAT ® 103 is diluted with water and sprayed evenly over the entire surface. Once the water has evaporated, a homogeneous, completely encrusted, film-like surface remains. This surface is completely weatherproof and covers the stockpile like a tarpaulin as long as ...