Applications

  • Remote temperature monitoring - Waste & Recycling - Composting

    Remote temperature monitoring

    To abide local regulations, and ensure efficient and effective composting, the temperatures of the windrows must be measured and logged constantly. With accurate temperature measurements, you can determine the optimum time to turn the windrows for quicker compost production. Time consuming and error prone manual data collection is eliminated using a SureCross FlexPower Node equipped with three thermocouples to automatically monitor the temperature at three depths within a compost windrow. Temperature sensor...

  • Remote level monitoring - Waste and Recycling - Landfill

    Remote level monitoring

    Leachate level control is a primary function in landfills. Although different types of pumps are used, all pumps need to be installed with a totalizing counter mounted at the top of the well head to monitor the pump cycles and to calculate the total volume of leachate removed from the well. Instead of manually monitoring the leachate level and collecting the pump count data, use FlexPower™ Counter Nodes to wirelessly send data from the pumps back to a central control location to save time and eliminate...

  • Wireless multiple parameter monitoring - Water and Wastewater - Water Monitoring and Testing

    Wireless multiple parameter monitoring

    Monitoring multiple sensing points including fill level, pH, conductivity, and flow—often from varied locations in a large water treatment plant—can be a challenge. With four analogue inputs, a single SureCross Node can easily centralize and transmit critical monitoring information from multiple Sensors or controllers. Banner’s unique power management capability enables a single Node equipped with a FlexPower™ optimized QT50U or T30UX ultrasonic analogue sensor (level detection) to...

  • Temperature monitoring in a rotary kiln - Environmental - Environmental Monitoring

    Temperature monitoring in a rotary kiln

    Taking measurements on rotating equipment, such as a kiln or rotary table, usually requires a complex and expensive system of cabling. Even taking precautions and using specialized equipment doesn’t eliminate cable tangles and breaks. The SureCross Wireless Network eliminates complexities associated with data acquisition from rotating and moving machinery such as a rotating kilns in cement or composting industry. Crucial temperature data is acquired using a thermocouple and transmitted from the FlexPowered...

  • Wireless monitoring in EX areas - Monitoring and Testing - Environmental Monitoring

    Wireless monitoring in EX areas

    The DX 99 battery operated remote IO unit allows to monitor sensors situated in EX areas (zone 0 and 20) whithout the need for costly and complicated cable runs. Thanks to elaborate power management, the radio unit can power the sensor from the battery (up to 19V for a warm up time of 1 min)