Be.T.A. Strumentazione Srl

4 products found

Be.T.A. Strumentazione Srl Products

  • Gas Diluters

    The below detailed gas dividers are individual products, but made by a single module or by the composition of two or three modules. Modules type are just two : CAP30 and CAP1A100, but the modules combinations produce a models range that may satisfy a lot of clients needs. The module CAP30 may be used single or double (BetaCAP60-3G) The module CAP1A100 may be added as pre-scaler by 100 to CAP30 or to CAP60-3G and may be bypassed or inserted to get the higher dilutions (up to 6000:1)

  • Model BetaCAP30 - Gas Diluter

    Model BetaCAP30 - Gas Diluter

    BetaCAP30 is a gas divider that uses 30 capillaries, to operate 31 dilution ratios (between 0 and 100% of the concentration to be diluted). The choice of 30 capillaries is not aimed at carrying out tests on 30 steps, but to increase the diluter application flexibility reducing the number of required cylinder concentrations. With BetaCAP30 it is possible to perform linearity tests on 5 steps (0, 20%, 40%, 60%, 80%, 100% of the measurement range) using...

  • Model BetaCAP30X100 - Gas Diluter With Two Diluting Range

    Model BetaCAP30X100 - Gas Diluter With Two Diluting Range

    BetaCAP30X100 is a gas divider in two stages with 100 + 30 equal capillaries, designed to operate 31 dilution ratios linearly scaled between 0 and 100%) and 30 more between 3.000: 1 and 100: 1. While the first range of dilutions gets the main application of the analyzers for emissions, the second is aimed to tests of analyzers air quality (immission).

  • Model BetaCAP60-3G - Double Gas Diluter

    Model BetaCAP60-3G - Double Gas Diluter

    BetaCAP60-3G is a 60-step diluter, capable of diluting 2 gases in a diluting gas, in any relationship between them. BetaCAP60-3G was created to satisfy the need of combining linearity tests with the possibility of performing interference tests. For this purpose, having two components (measuring and interfering) pure or contained in mixture in different cylinders, these can be diluted differently and independently. To clarify the operating conditions,...

  • Model BetaCAP60X100 - Compact Gas Diluter With 3 Inputs Pre-Dilution Systems

    Model BetaCAP60X100 - Compact Gas Diluter With 3 Inputs Pre-Dilution Systems

    BetaCAP60X100 a compact diluter with 3 inputs (two gases to be diluted in a diluting gas), pre-dilution just for an input and flow comparator for self-checking with relative deviations calculation. BetaCAP60X100 is built complying with the principles that inspire the entire Be.T.A. production : equal capillaries, electronic pressures control and manifold construction in highly corrosion-resistant materials. Very similar to the BetaCAP60-3G model, is...