Carbolite Gero Ltd - part of Verder Scientific

13 Articles found

Carbolite Gero Ltd - part of Verder Scientific Articles

indicates free access

  • Heat Treatment of Steel

    Heat Treatment of Steel

    This application note introduces a series of furnaces suitable for hardening, tempering and annealing of steel. Hardening and tempering of steels The HRF furnace is suitable for hardening and tempering steel by increasing the mechanical resistance ...

  • Modern Solutions for Safe Debinding of Ceramic Parts

    Modern Solutions for Safe Debinding of Ceramic Parts

    CARBOLITE GERO has developed sophisticated safety concepts for safe debinding of ceramic parts Technical ceramics are manufactured in powder-based production processes. The ceramic powder component is formed via various manufacturing steps and is ...

  • Cement testing and pilot plant production: oven & furnace requirements

    Cement testing and pilot plant production: oven & furnace requirements

    Much has changed since Joseph Aspdin patented grey Portland Cement in 1824 with his son William making it commercially viable by 1842. In the 21st Century those who require cement have a vast array of solutions to choose from depending on the ...

  • Cement testing for compliance

    Cement testing for compliance

    The compliance of cement with standards such as EN 197 / ASTM C 150 is a quality requirement. Quality assurance of the raw materials used in calcination and also during the clinker production is necessary. Carbolite Gero offers different furnaces ...

  • Heat Treating 3d Additive Manufactured Parts

    Heat Treating 3d Additive Manufactured Parts

    Introduction At present there are two main techniques used in the additive manufacturing of 3D metal parts. These take time but are outstanding for creating complex or ‘impossible’ parts which cannot be created using traditional casting ...

  • Graphitisation at up to 3000 °C - what is it good for?

    Graphitisation at up to 3000 °C - what is it good for?

    Graphite is a soft, slippery, greyish-black substance. It has a metallic luster and is opaque to light. Graphite is a good conductor of heat and electricity. Often graphite is simply named carbon. Under inert gas or vacuum graphite is extremely ...

  • High Temperature Furnace for Heat Treatment of Superconducting Magnets at CERN

    High Temperature Furnace for Heat Treatment of Superconducting Magnets at CERN

    The high temperature furnace GLO 10 000 KE/09-1G from CARBOLITE GERO is tailored for the heat treatment of superconducting coils for CERN. The plant, which is going into full operation at the CERN site in the middle of this year, was introduced in ...

    T. Ohnweiler;F. Lackner

  • The future of ash fusion analysis

    The future of ash fusion analysis

    Professor Ed Lester and Thomas Huddle, University of Nottingham, Patrick Daley, the EPSRC Centre for Doctoral Training in Carbon Capture and Storage and Cleaner Fossil Energy, and Paul Haigh, Carbolite Gero Ltd, UK, detail advances in ash fusion ...

  • Determining the CO2 Reactivity of Petroleum Coke

    Determining the CO2 Reactivity of Petroleum Coke

    Calcinated petcoke is an essential ingredient in the production of aluminium. Its quality needs to be monitored continuously throughout the production process to ensure a high quality metal grade. As part of its range of coke testing furnaces, ...

    Paul Haigh

  • Condensate-free debinding with vacuum furnaces

    Condensate-free debinding with vacuum furnaces

    Today techniques like pressing, rapid prototyping, powder metallurgy, siliconization and sintering are widely used production methods. Sintering, for example, is only the last step of a near-net-shape fabrication technology. Many processes, such as ...

  • Heat treatment at low pressures

    Heat treatment at low pressures

    High temperature vacuum furnaces are used for heat treatment of samples at low pressure (down to 10-6 mbar) and under partial gas atmospheres. In the bottom loader version the bottom is lowered and driven out of the furnace. It then pivots forward ...

  • High vacuum soldering and brazing with hood furnaces

    High vacuum soldering and brazing with hood furnaces

    Nowadays many electronic components, for example devices used in satellites or aircraft, have to withstand challenging environments such as vacuum or extremely high temperatures. To manufacture reliable electronic components like these a connection ...

  • Recycling and assessing precious metals

    Recycling and assessing precious metals

    Global demand for precious metals continues to soar, whether for jewellery or for use in industrial applications. While gold and silver have been used for thousands of years in jewellery, more recently precious metals are performing useful and ...