Carbolite Gero Ltd - part of Verder Scientific

13 products found

Carbolite Gero Ltd - part of Verder Scientific Products

  • Tube Furnaces - Universal Tube Furnace

  • Carbolite - Model TF - Tube Furnace

    Carbolite - Model TF - Tube Furnace

    Carbolite Gero’s versatile new TF tube furnace range incorporates high-quality heating elements and innovative thermal insulation design to achieve first class performance while maintaining both reduced case temperatures and power consumption. The TF range has been designed with flexibility in mind. Slide-in accessory work tubes and the use of tube adapters allow a single furnace to accommodate a variety of tube diameters, whilst the work tubes...

  • Carbolite - Model FHA / FHC - Universal Tube Furnaces Up to 1350°C

    Carbolite - Model FHA / FHC - Universal Tube Furnaces Up to 1350°C

    The FHA, single zone, and FHC, 3-zone, tube furnaces can be used either vertically or horizontally and have a maximum operating temperature of 1350 °C. The extensive F range of tube furnaces is offered with a wide range of accessories. The furnaces comprise ceramic fibre modules with a high quality 5 mm APM wire heating element mounted in the insulation, held in position by a ceramic holding ridge. The low thermal mass ceramic fibre insulation...

  • Carbolite - Model AZ Series - Eight Zone Tube Furnace

    Carbolite - Model AZ Series - Eight Zone Tube Furnace

    The AZ is an eight zone tube furnace for controlled temperature profiles. These zones can be used to generate temperature profiles along the heated length of the furnace. With eight zones, thick insulation, and highly symmetrical winding of the heating elements throughout the entire AZ furnace, a uniformity of better than ± 5 °C is achieved. A key advantage of the eight individually controlled zones is the extension of the uniform length...

  • Carbolite - Model HTRH - High Temperature Horizontal Tube Furnace

    Carbolite - Model HTRH - High Temperature Horizontal Tube Furnace

    The Carbolite Gero high temperature tube furnaces HTRH can be used horizontally up to 1800 °C. The high-grade insulation materials guarantee low energy consumption and high heating rates due to their low thermal conductivity. The insulation and molybdenum disilicide (MoSi2) heating elements are installed in the rectangular housing. The heating elements are vertically hanging and can be replaced easily. At higher temperatures and in the presence of...

  • Carbolite - Model HTRV - High Temperature Vertical Tube Furnaces

    Carbolite - Model HTRV - High Temperature Vertical Tube Furnaces

    The HTRV high temperature tube furnaces are designed for vertical orientation and operation up to 1800 °C. The high grade insulation material consisting of fibre plates provides low energy consumption and high heating rates due to its low thermal conductivity. The insulation and the molybdenum disilicide (MoSi2) heating elements are installed in a rectangular housing. The heating elements hang vertically and can be easily replaced. At higher...

  • Carbolite - Model HTRH-GR - Graphite Tube Furnace

    Carbolite - Model HTRH-GR - Graphite Tube Furnace

    With the adjustable stand option, the Carbolite Gero graphite tube furnace range up to 2600 °C can be used at various angles, ranging from horizontal to vertical. This range of cold wall tube furnaces is heated by graphite elements and insulated by graphite felt. At higher temperatures above 400 to 600 °C graphite is air sensitive and needs to be kept under either an inert gas or vacuum atmosphere. To maintain an oxygen free environment, the...

  • Carbolite - Model MTF - Wire Wound Single Zone Tube Furnaces

    Carbolite - Model MTF - Wire Wound Single Zone Tube Furnaces

    The MTF wire wound tube furnaces, like the larger diameter CTF range use a wire element that is wound directly onto a fixed integral ceramic work tube. This simple and economical design provides a furnace which can be used without the need to purchase an accessory work tube. However, should vacuum or a modified atmosphere be required, it is necessary to use a separate slide-in work tube in order to provide the required length needed to fit end seals....

  • Carbolite - Model EHA / EHC - Compact Horizontal Tube Furnace

    Carbolite - Model EHA / EHC - Compact Horizontal Tube Furnace

    The compact horizontal tube furnace range EHA / EHC uses free radiating wire elements embedded within the insulation of the furnace body. The benefit of this design is its flexibility with the use of tube adapters the same tube furnace can be used with a variety of tube diameters. The EHA are single zone furnaces and the EHC are three zone furnaces.

  • Carbolite - Model EVA / EVC - Compact Vertical Tube Furnace

    Carbolite - Model EVA / EVC - Compact Vertical Tube Furnace

    The compact vertical tube furnace range EVA / EVC uses free radiating wire elements embedded within the insulation of the furnace body. The benefit of this design is its flexibility with the use of tube adapters the same tube furnace can be used with a variety of tube diameters. The EVA are single zone furnaces and the EVC are three zone furnaces.

  • Carbolite - Model GHA/GHC - Modular Horizontal Tube Furnaces

    Carbolite - Model GHA/GHC - Modular Horizontal Tube Furnaces

    The tube furnace range GHA (single zone) / GHC (three zone) uses free radiating wire elements embedded within the insulation of the furnace body. The benefit of this design is its flexibility; with the use of tube adapters the same furnace can be used with a variety of tube diameters. The extended uniform zone in the mid-section of the work tube in the GHC 3-zone furnace is achieved with the use of end zone controllers which track the centre zone...

  • Carbolite - Model GVA/GVC - Modular Vertical Tube Furnaces

    Carbolite - Model GVA/GVC - Modular Vertical Tube Furnaces

    The tube furnace range GVA (single zone) / GVC (three zone) uses free radiating wire elements embedded within the insulation of the furnace body. The benefit of this design is its flexibility with the use of tube adapters the same furnace can be used with a variety of tube diameters. The extended uniform zone in the mid-section of the work tube in the GVC 3-zone furnace is achieved with the use of end zone controllers which track the centre zone...

  • Carbolite - Model CTF12/TZF12 - Wire Wound Tube Furnaces

    Carbolite - Model CTF12/TZF12 - Wire Wound Tube Furnaces

    The CTF single zone and TZF 3-zone wire wound tube furnaces use a wire element that is wound directly onto a fixed diameter integral ceramic work tube. This simple and economical design of both the CTF and TZF provides a tube furnace that can be used without the need to purchase an additional work tube. However, should vacuum or a modified atmosphere be required, it is necessary to use a separate additional slide-in work tube in order to provide the...

  • Carbolite - Model STF/TZF - High Temperature Tube Furnace 1600 °C

    Carbolite - Model STF/TZF - High Temperature Tube Furnace 1600 °C

    The Carbolite Gero STF single zone and TZF 3-zone high temperature tube furnace range is available at 1500 °C and 1600 °C with both models using silicon carbide heating elements. This range of tube furnaces does not include an integral work tube and one must be selected as an additional item. The work tube length is dependent on the application eg for use with modified atmosphere or vacuum. The TZF 3-zone high temperature tube furnace has...