25 products found

Products

  • Dust & Opacity Monitoring

  • Model LM3086  - Dust & Opacity Monitor

    Model LM3086 - Dust & Opacity Monitor

    The new performance standard in opacity/dust monitoring, fulfilling U.S EPA 40 CFR Appendix B, PS1 requirements. LM 3086 EPA3 continues to be the standard for performance in opacity/dust monitoring after more than 1000 installations worldwide and more than 500 in the USA alone. It fulfills the U.S EPA 40 CFR Appendix B, PS1 requirements and is TUV approved.

  • Model LM3189  - Process Dust and Opacity Monitor

    Model LM3189 - Process Dust and Opacity Monitor

    LM 3189 model features a semi-conductor laser technology for high efficiency and reliability at a very affordable cost. They are most suitable for process applications and works in a variety of ranges. Suitable for power plants, cement plants, iron and steel and tunnel applications.

  • Model LM3189  - Port Laser Dust Monitoring

    Model LM3189 - Port Laser Dust Monitoring

    The LM 3189-Port is a lightweight, compact unit which can be easily installed and removed. The LM 3189-Port is meant for temporary opacity and dust monitoring and can be moved from one stack to another.

  • Continuous Emissions Monitoring

  • IntelliCEMS  - Gas Analyzer

    IntelliCEMS - Gas Analyzer

    Methane and Oxygen analyzer is housed in a climate controlled NEMA 4 or NEMA 4x enclosure approximately 48”H x 36”W x 16”D.

  • IntelliCEMS  - Biomass Analyzer

    IntelliCEMS - Biomass Analyzer

    The IntelliCEMS Gas Analyzer Systems by Cemtrex, Inc. offers the latest in technology to allow your facility to meet or exceed EPA requirements on emissions monitoring (CFR 40 and CAA 1990). In response to the regulations in monitoring of all greenhouse gases set by the EPA for all biomass processing facilities, Cemtrex now offers customizable gas analyzer systems that allow for monitoring of multiple gases as well as a variety of...

  • Mercury Monitors

  • Analyzers

  • Gas Detection Systems

  • Model S2K  - Sampling System

    Model S2K - Sampling System

    The model S2K Sampling System is a flexible sampling system which is designed to condition the sample as required. This system not only brings the sample to the sensor, in many cases, it is the only viable solution to difficult applications. For instance, in applications where the sample concentration is too high for the sensor, the model S2K's ability to dilute samples allows the sensor to be exposed to the sample and provide an accurate...

  • Process Analyzers

    Cemtrex provides complete integrated analyzer systems and all related services from initial engineering through manufacturing, testing and field start-up. Analyzer Systems are normally supplied installed in the special Analyzer Houses including air-conditioning, power distribution, lighting, termination and junction boxes, gas and flame detection, relevant piping and wiring. Process sample probes and sample transport lines are designed to ensure representative and rapid sampling, avoiding a

  • Beacon 3000 Process NIR Analyzer

    Beacon 3000 Process NIR Analyzer

    The Beacon 3000 is an inline, multi-channel process analyzer system. It enables non-contact, real-time monitoring and closed-loop control of physical properties and chemical composition in industrial process applications. The Beacon 3000 is ideal for monitoring petroleum,chemical and petrochemical products. Based on novelalgorithms, the Beacon 3000 measures the absorption spectrum in the near infrared (NIR) fast and accurately without labor and...

  • MOD-8000 Process NMR Analyzer

    MOD-8000 Process NMR Analyzer

    The MOD-8000 online process analyzer is designed to analyze the composition of process fluids. Using Magnetic Resonance (MR) spectroscopic techniques, it can detect the presence and the concentration of chemical constituents in a process stream. By utilizing exclusive software, it provides closed loop supervisory control of a process unit. It has an extensive range of applications from light Naphtha streams to heavy Crude oil. Typical user benefits...

  • MOD-4100 Crude Oil Analyzer

    MOD-4100 Crude Oil Analyzer

    The new MOD-4100 represents a breakthrough in crude oil on-line analysis by determination of Crude Density, Concentration of Salt, Hydrogen Sulphide and Water by one single analyzer system. The analyzer comes installed in outdoor stainless steel enclosure and equipped with an integral sample conditioning system. On-line analysis of the quality of crude oil is important because this allows the crude to be evaluated for potential to corrode equipment...

  • MOD-1022 Natural Gas Quality Analysis System

    MOD-1022 Natural Gas Quality Analysis System

    The MOD-1022 On-line Analytical System is a complete equipment set, which allows performing the following tasks in real time mode and in field conditions: *Continuous sampling of gas from pipeline or process vessel, its filtration and separation from accompanying impurities (solid particles, salts, oils, aerosols of liquid hydrocarbons, glycols, amines etc.) *Sample preparation for analysis of physical and chemical parameters according to...

  • MOD-6400 Sulphur Analyzer

    MOD-6400 Sulphur Analyzer

    MOD-6400 Sulphur Analyzer utilizes field-proven ultraviolet (UV) fluorescence technology to continuously monitor the Total Sulphur content found in gasoline, diesel and other petroleum products. UV-Fluorescence is a non-consuming method of detection, eliminating the hassles associated with replacing tape cartridges, and enables detection as low as 10 ppb, depending on application, with stable, reproducible results. The analyzer is designed to meet...

  • Process Gas Chromatographs

    Process Gas Chromatographs

    Our current offering for Process Gas Chromatograph applications is based on Siemens MAXUM edition II and MicroSam solutions which are backward compatible with the Applied Automation's Advance Maxum, and Optichrom Advance and Siemens PGC 302, RGC 202. *The Maxum edition II is used in all branches of the fine chemicals, refining and hydrocarbon processing industries. It performs chemical composition analysis of gases and liquids that are present in all...

  • Maxum edition II

    Maxum edition II

    This process gas chromatograph, which has resulted from decades of international experience and technology development, leads the industry in capability, flexibility and reliability. The Maxum edition II is used in all branches of the fine chemicals, refining and hydrocarbon processing industries. It performs chemical composition analysis of gases and liquids that are present in all phases of production. The Maxum is built for installation in harsh...

  • MicroSAM

    MicroSAM

    MicroSAM, the newest on-line Process Gas Chromatograph from Siemens, brings a new dimension to the industry - small! Using modern silicon micro-machining techniques achieves miniature size while simultaneously increasing power and versatility. The explosion-proof enclosure contains everything you need for separation and detection of the measured sample integrated into the space of a small platter.

  • SITRANS CV

    SITRANS CV

    SITRANS CV is the consequent advancement of a micro process chromatograph based on MEMS technology to a calorific value (CV/BTU) analyser with high performance. The analyser can be used also in rough environment because of its rugged and compact design. The unique multiple and in-line analytical functions open up new possibilities and provide shorter analysis times.

  • Smart Analyzer Houses

    Smart Analyzer Houses

    Cemtrex Analyzer Houses are versatile enough to accommodate virtually any combination of required analyzers, sample conditioning systems and analyzer management systems. The analyzer houses normally have a facility for remote real time monitoring, diagnostics and maintenance via secured industrial network, offering complete remote access solutions through a choice of embedded routers using PSTN, ISDN, and GPRS or EDGE technology. The embedded...

  • Analyzer Systems

    Analyzer Systems

    Cemtrex provides complete integrated analyzer systems and all related services from initial engineering through manufacturing, testing and field start-up. Analyzers Systems are normally supplied installed in the special Analyzer Houses including air-conditioning, power distribution, lighting, termination and junction boxes, gas and flame detection, relevant piping and wiring. Process sample probes and sample transport lines are designed to ensure...

  • ANACON Software

    ANACON Software

    ANACON is a full-distributed software Analyzer Management and Control System that was developed to provide more efficient tools for maintenance calibration and validation of the analyzer systems. It was configured to be connected to remote systems using communication links like TCP/IP or RS-485. ANACON is able to monitor the operating state of the installed equipment and validate a wide variety of analyzers and instruments. Once an analyzer or instrument...