Chemisch Thermische Prozesstechnik GmbH / CTP Air Pollution Control

18 products found

Chemisch Thermische Prozesstechnik GmbH / CTP Air Pollution Control Products

  • Systems - Oxidation

  • CTP VOXcube - Regenerative Thermal Oxidation

    CTP VOXcube - Regenerative Thermal Oxidation

    The VOXcube purifies organic (VOC) and specific inorganic pollutants in the waste gas. The system is suitable for flow rates up to 125,000 Nm³/h, independent of the concentration and the nature of contaminants. For waste gas temperatures from -20°C up to +350°C.

  • CTP AutoTherm - Regenerative Thermal Oxidation

    CTP AutoTherm - Regenerative Thermal Oxidation

    The perfect CTP solution for increased solid matter content (dust), sticky substances or corrosive components in the waste gas. The AutoTherm is suitable for flow rates of up to 300,000 Nm³/h, independent of the concentration and the nature of the contaminants. For waste gas temperatures from -20°C up to +400°C.

  • CTP MultiTherm - Direct Thermal Oxidation (TO)

    CTP MultiTherm - Direct Thermal Oxidation (TO)

    The MultiTherm safely removes highly contaminated, i.e. halogenous, waste gas streams and liquid waste as well as wastewaters especially in the pharmaceutical, chemical and petrochemical industry. CTP‘s MultiTherm is a combined process in air purification. It consists essentially of a thermal oxidation and one or more upstream or downstream processes fitted to the application. These comprise, among others, heat recovery, wet scrubbing and...

  • CTP RecuKAT - Recuperative Catalytic Oxidizer (CO)

    CTP RecuKAT - Recuperative Catalytic Oxidizer (CO)

    For high cleaning efficiency, the RecuKAT's attractive economic performance is due to the low reaction temperature of the CTP oxidation catalysts.  CTP can refer to 25 years of experience with catalysts in industrial applications. The RecuKAT as an air cleaning system is suitable for small to medium gas flows with high concentrations.

  • CTP AutoKAT - Regenerative Catalytic Oxidation (RCO)

    CTP AutoKAT - Regenerative Catalytic Oxidation (RCO)

    The AutoKAT combines the advantages of the regenerative thermal oxidation with those of catalytic oxidation and is a technologically advanced air pollution solution. The AutoKAT is a very cost-effective alternative if no catalyst poisons occur. Existing systems can be upgraded to an AutoKAT.

  • Systems - Reduction

  • Systems - Adsorption

  • CTP RotorSorb - Rotary Adsorber

    CTP RotorSorb - Rotary Adsorber

    Rotary adsorbers based on the principle of adsorption are CTP's solution for continuous air pollution control at room temperature. The Rotorsorb achieves an optimal cleaning efficiency of organic pollutants.

  • CTP VOXsorbTherm - Fixed Bed Adsorption System

    CTP VOXsorbTherm - Fixed Bed Adsorption System

    The VOXsorbTherm system has been developed especially for very lowly contaminated (VOC concentration < 100 mgVOC/Nm³) and periodically occuring waste gas streams. This adsorption system stands out due to an efficient non-simultaneous combination of pollutant separation and removal.

  • Systems - Absorption

  • CTP - Wet Gas Scrubbing System

    CTP - Wet Gas Scrubbing System

    Removal of inorganic components: The hot waste gas from the customer's process or upstream oxidizer is cooled in a quench and then directed to a scrubbing chamber. The scrubbing medium, usually water or acid/alkali solutions is injected into the scrubber and trickles over the packing material from top to bottom. The inorganic pollutants in the waste gas interact with the scrubbing solution. Purified gas is demisted and leaves the scrubber.

  • Systems - Filtration

  • CTP - Mechanical-Thermal Filter

    CTP - Mechanical-Thermal Filter

    Removal of sticky particulate (e.g. tar) and aerosols: CTP’s prefilters are filled with high temperature-proof ceramic saddles which generate a turbulent flow and allow for a rapid bake-out of deposits. Due to the depth and the volume of the filter packing particles, tar and aerosols are removed from the waste gas to a high degree.

  • CTP - Dust and Particulate Fabric Filters

    CTP - Dust and Particulate Fabric Filters

    Removal of particulate: Even fine-grained particles are arrested in baghouse or pocket filters. Different filter media are available, depending on temperature and dust type. The dust collected in the filter is cleaned and discharged with jets of compressed air.

  • Components

  • CTP - Smoothing Bed

    CTP - Smoothing Bed

    Very large fluctuations in the concentration of contaminants in the raw gas challenge the air purification system and can even lead to a complete shutdown when temperature limits are exceeded. An upstream CTP smoothing bed stores and smoothes concentration peaks. The fixed bed provides the air purification system with an even and reduced contaminant concentration, enabling it to operate in the correct condition. Any exceeding of the lower explosion...

  • CTP - Valves

    CTP - Valves

    CTP valves are specially designed for applications in gaseous media. They are manufactured from different metals and are tight, robust and wear-resistant. Additional options such as blocking gas sealing, high temperature design or position control are also available.

  • Technology

  • CTP - Model CO - Catalytic Oxidation Technology

    CTP - Model CO - Catalytic Oxidation Technology

    CTP's vision for catalytic oxidation (CO) combines: Extensive expertise in the production of random and honeycomb block catalysts with well-engineered fixed bed technology and highly efficient integrated tube or plate heat exchangers.

  • CTP - Concentrator

    CTP - Concentrator

    Rotary Adsorbers result from the technically mature end of that technology widely used in air pollution control.