Chromatotec Group

50 products found

Chromatotec Group Products

  • Auto GC866 Analyzers - VOCs Analyzers

    Analysis of VOC/BTEX in ambient air (ppb/ppt) . This technology comes from the Swiss pharmaceutical industry . Partnership with airmotec AG SA in Swiss and airmotec GmbH in Germany in 1990 and 1991.

  • Auto GC866 Analyzers - Sulfur Compounds Analyzers

  • chromaTHC - Total Hydrocarbons Monitoring Analyzer

    chromaTHC - Total Hydrocarbons Monitoring Analyzer

    CH4 and Non Methane Total Hydro Carbon (NMTHC) Monitoring and analysis of Methane and Non-Methane Hydrocarbons by flame ionisation detection (ppm level analysis). The CHROMATHC is an automated isothermal industrial gas chromatograph dedicated to the analysis of volatile organic compounds in air (indoor, outdoor, combustion), industrial hygiene, pure gas like N2/CO2/O2.

  • airmo - Model S - Automatic Isothermal Gas Chromatograph Analyzer

    airmo - Model S - Automatic Isothermal Gas Chromatograph Analyzer

    An autoGC-trap-FPD for low sulfur quantification. airmo S is a fully automatic isothermal gas Chromatograph for the ana­lysis & monitoring of sulfur compounds with Sulfur Specific Detector. This solution is specific for application where low sensitivity on sulfurs must be reached. This auto GC uses a valve with 1 sample trap, and metallic capillary columns.

  • BTEX -airTOXICBTXPID - 1,3 Butadiene Analyzer

    BTEX -airTOXICBTXPID - 1,3 Butadiene Analyzer

    A GC/PID for automatic monitoring of BTEX in air, water and soils. This instrument uses a port valve with a single absorbent trap, and a 30 meter metallic 0.28 mm ID column. Minimum detection level as low as 10 ppt for application Benzene or 1,3-Butadiene in ambient air. Miniaturization, sensitivity, mobility and flexibility are its main features. Everything from the sample port up to the data storage is integrated in a 19'- rack 5U.

  • TRS Medor - Sulfur Compounds Analyzer

    TRS Medor - Sulfur Compounds Analyzer

    The TRSMEDOR is an automatic and isothermal gas chromatograph dedicated to sulfur compounds analysis (H2S, mercaptans and sulphides) in different matrices. Two versions exist : the TRSMEDOR ppm which measures at ppm levels and the TRSMEDOR ppb which measures at ppb levels.

  • MEDOR - Model Exp - Sulfurs / Mercaptans / Odor Analyzer

    MEDOR - Model Exp - Sulfurs / Mercaptans / Odor Analyzer

    Sulfurs / Mercaptans / odor analyzer: MEDOR Exp Chromatotec has engineered and manufactured the new Exp Medor designed to operate in hazardous area environment such as Class I, Division 2, group C&D and ATEX zone I and II.

  • ChromaPID - BTEX Analyzer with PID Detector

    ChromaPID - BTEX Analyzer with PID Detector

    A GC PID for automatic monitoring of compounds, in air, water or soils: This instrument uses a port valve with a loop, and a metallic 0.53 mm ID column. It has a minimum detection level of ppb. Miniaturization, sensitivity, mobility and flexibility are its main features. Everything from the sample port up to the data storage is integrated in a 19' rack 4U. Isothermal oven in standard (programmed gradient temperature in option) : pressure/flow control...

  • airmoVOC - Model C6C12 - Heavy Volatile Hydrocarbons Analyzer

    airmoVOC - Model C6C12 - Heavy Volatile Hydrocarbons Analyzer

    Capable of anlaysing up to 32 compounds from C6-C12 (used in airmozone) or PAMS. The airmoVOC C6-C12 uses a valve with 1 sample trap. It also features a metalic capillary column. Miniaturization, sensitivity, mobility and flexibility are its main features.

  • airTOXIC - Model BTX PID - BTEX and 1,3 Butadiene Analyzers

    airTOXIC - Model BTX PID - BTEX and 1,3 Butadiene Analyzers

    A GC/PID for automatic monitoring of BTEX in air, water and soils This instrument uses a port valve with a single absorbent trap, and a 30 meter metallic 0.28 mm ID column. Minimum detection level as low as 10 ppt for application Benzene or 1,3-Butadiene in ambient air. Miniaturization, sensitivity, mobility and flexibility are its main features. Everything from the sample port up to the data storage is integrated in a 19'- rack 5U.

  • airmo - Model H-CHO - Formaldehyde Analyzer

    airmo - Model H-CHO - Formaldehyde Analyzer

    airmo HCHO is designed for the measurement of formaldehyde in air or pure gases. The airmo HCHO is an autoGC using FID detector dedicated to Formaldehyde monitoring at low concentration. This instrument uses a valve with a single sorbent trap, a metallic column and a methanizer.

  • ChromaFID - Volatile Organic Compounds (VOC) Analyzer

    ChromaFID - Volatile Organic Compounds (VOC) Analyzer

    A GC/FID instrument for automatic, continuous analysis of Volatile Organic Compounds (20 ppb to ppm). The ChromaFID is a gas chromatograph dedicated to the analysis of VOC’s from 20 ppb to ppm levels. The analyser enables the continuous monitoring of the concentration...

  • airmoSCAN - Model XPERT - VOC and Volatile PAH Analyzer

    airmoSCAN - Model XPERT - VOC and Volatile PAH Analyzer

    Automatic Gas Analyzer for Volatile PAH compounds and VOCs monitoring. The airmoSCANXPERT uses a valve with a sampling trap. It also features a metallic capillary column. Its main characteristics are: Miniaturization, sensitivity, mobility and flexibility.

  • Auto GC866 Analyzers - Odor Solutions

  • Odor & VOCs Monitoring for Odor & Chemical Control Units (OCU)

    Odor & VOCs Monitoring for Odor & Chemical Control Units (OCU)

    Methane, Non-Methane Total Hydrocarbons and Total Hydrocarbons with ChromaTHC-OCU. When odor issues occur at an industrial site, rapid diagnosis must be done to define the best source treatment strategy. Manual sampling techniques can lead to problems during sampling and transport to the laboratory for analysis. Therefore, there is a need for online analyzers to monitor odors constituents such as methane and non-methane Volatile Organic Compounds...

  • vigiODOR - Dispersion Modelling Odour and Pollutant Gas

    vigiODOR - Dispersion Modelling Odour and Pollutant Gas

    The vigiODOR solution is based on Plumair web platform. This unique solution allows to forecast and monitor in real-time the dispersion of odour and gas plumes (H2, NH3 VOC, TBM, etc) around industrial sites. Connected to the network of vigi e-noses analyzers and to the weather station installed on-site, it provides real-time key information for optimised operation of facilities and efficient management of chemical and olfactory pollution.

  • Auto GC866 Analyzers - Permanent Gases Analyzers

  • Chroma CO - CO / CO2 / CH4 / HCHO Analyser

    Chroma CO - CO / CO2 / CH4 / HCHO Analyser

    A gas analyser using flame detection with a catalytic methanator module to analyse CO and CO2 for monitoring gas purity and electronic gas measurement. A 19' inch rack mountable chassis, 4U high. It has the ability to be used as a fully integrated system for automatic sample analysis as well as it is transportable for use at various sites. Our application flexibility allows the chromaCO start up to meet the customer’s specifications.

  • ChromaTCD - Ne / H2 / O2 / N2 / CO / CH4 / CO2 Gas Analyser

    ChromaTCD - Ne / H2 / O2 / N2 / CO / CH4 / CO2 Gas Analyser

    The continuous mode permanent gases monitor. A highly automated system for routine field measurement of permanent gases on the range. The chromaTCD is an automatic industrial gas analyser. The sample comes through the sampling loop. Then the sample is injected into an analytical column for separation. The system uses packed or capillary column.

  • Mass Spectrometers

  • airmoSCAN XPERT - Model autoGC-FID/MS - Mass Spectrometers

    airmoSCAN XPERT - Model autoGC-FID/MS - Mass Spectrometers

    Due to the large number of Volatile Organic Compounds (VOCs), there is a need to combine their separation and quantification by Gas Chromatography (GC) with Flame Ionization Detection (FID) and their individual identification by Mass Spectrometry (MS).

  • Chromatotec - Model GAM 3000 (IPI) - Process Mass Spectrometer for Direct Analysis

    Chromatotec - Model GAM 3000 (IPI) - Process Mass Spectrometer for Direct Analysis

    Chromatotec® Group distributes Process Quadrupole Mass Spectrometers from InProcess Instruments in France, Italy, Benelux, Saudi Arabia and Taiwan. Learn more about this partnership following this link. With this product line, we can now offer flexible and customer-specific solutions ideal for very fast, precise and continuous multi-component gas analysis. These complete systems include software, gas inlets with pressure and temperature control,...

  • Peripherals - Gas Generators

  • airmoPURE - Model D - High Purity Air Generator

    airmoPURE - Model D - High Purity Air Generator

    We propose a generator of high purity air for our analyzers as well as for thedilution of permeation tubes. This air can be used as carrier gas for our'MEDOR' instruments as well as for FID detector.

  • Hydroxychrom - Hydrogen Generator

    Hydroxychrom - Hydrogen Generator

    Hydroxychrom is a gas generator providing high purity (grade: 99.9995%) of hydrogen used as carrier gas or fuel gas for autoGC FID (for VOCs) and FPD (for sulfur compounds). Generator of high purity hydrogen used a carrier gas for airmoVOC and chromaFID analysers as well as for the FID flame. Hydroxychrom is a high purily hydrogen generator and an important tool for the incoming H2 of FID, FPD detectors, BTEX, VOC analyzers and others....

  • Nitroxychrom - Nitrogen Generator

    Nitroxychrom - Nitrogen Generator

    Nitroxychrom is a gas generator providing high purity (grade : 99.9995%) of nitrogen used as carrier gas dilution gas for autoGC PID (for VOCs) and MEDOR (for sulfur compounds). Associated with internal calibration tubes, it allows to use specific components without oxidation risks.

  • Peripherals - Sampling

  • Chromatotec - Heated Multiplexing System with Inbuilt Calibration

    Chromatotec - Heated Multiplexing System with Inbuilt Calibration

    We propose multiplexers (selection of multichannel samples) adapted to your installation and controlled by our software VISTACHROM.  VISTACHROM can : 'Cycle' methods to analyze different ranges on each stream. Transfer data via MODBUS, specific for each stream.

  • Chromatotec - Purge and Trap Headspace Sampling Systems

    Chromatotec - Purge and Trap Headspace Sampling Systems

    Simplified and enhanced headspace sampling system designed to extract representative samples from the liquid phase. The vaporized sample can be preconcentrated using a trap to achieve quantification at very low concentration levels (ppb and/or ppm). Then, it is injected automatically and in continuous mode into the auto-GC analyzer.

  • Peripherals - Calibration

  • airmoCAL - Calibration Device

    airmoCAL - Calibration Device

    Calibration device inside 19ˮ and 4U rack. Designed for automatic validation of results at different concentration levels. ZERO / Sample / Cylinder / CALIB.

  • Peripherals - Enclosures

  • Chromatotec - Wall Mounted Rack

    Chromatotec - Wall Mounted Rack

    It allows to integrate the managing analytical and electronic part (LCD display under Windows). Instead of the 19' rack, this particular waterproof rack is used for some industrial applications for easy maintenance with a front door.

  • TRS Medor - Cabinet

    TRS Medor - Cabinet

    Deodorization application for Waste Water Plants. Deodorization of polluted air is captured and neutralized by successive chemical cleanings in the deodorization towers which neutralize the odours caused by bacteriological fermentation.

  • airmOzone - Cabinet

    airmOzone - Cabinet

    Our system airmOzone C2-C12 allows you to analyze the VOC thanks to: the calibration system with a bottle or permeation tube, a H2 generator, in-built LCD computer with our own operation software VISTACHROM, airmopump sampling, Peltier effect : for cooling, Airmopure : air generator. Applications in the atmosphere pollution, in the petrochemical fence line and clean air room.

  • Peripherals - Communication

  • Chromatotec - Wall Mounted Computer

    Chromatotec - Wall Mounted Computer

    We propose you a wall mounted industrial computer / box dedicated to the analyser (delivered with Windows XP and Vistachrom) - screen, keyboard and mouse not supplied.

  • Chromatotec - Automation Module

    Chromatotec - Automation Module

    The Automation module permits user defined automated computation. For example: Average computations, specific historical files, Logging files, alarm computation.