40 products found

products

  • Dosing Gases - Vacuum Regulators

    Vacuum Regulators are designed for dosing gas chlorine and with minor alterations also for other gases, working on the indirect vacuum principle.

  • Model M 20 C - Vacuum Regulators

    Model M 20 C - Vacuum Regulators

    They are made of the best and most resistant materials. The springs are made of tantalum alloys, the dosing valves of technically pure silver, the casing of rubber and plastic mixture, the membranes and washers of fluorized hydrocarbons (VITON, TEFLON, EPDM), which all ensures faultless operation of these devices at high mechanical and temperature load.

  • Model M 40 C - Vacuum Regulators

    Model M 40 C - Vacuum Regulators

    Vacuum regulators series M 40 C function in the same way as M 20 C Vacuum regulators, with the only difference that they are designed for dosing larger amounts of gas. M 40 C regulators consist of an inlet pressure valve, regulator head and a pressure gauge, and can be equipped with liquid chlorine gas trap and heater, or chlorine gas filter. The dosing capacity of the M 40 C vacuum regulator is up to 40 kg/h.

  • Model M 50 C - Vacuum Regulators

    Model M 50 C - Vacuum Regulators

    Vacuum regulators series M 50 C function in the same way as M 20 C Vacuum regulators, with the only difference that they are designed for dosing very high amounts of gas. M 50 C regulators consist of a inlet pressure valve, regulator head and a pressure gauge, and can optionally be equipped with liquid chlorine gas trap, y-strainer and heater. The max. dosing capacity of the M 50 C vacuum regulator is up to 200 kg/h.

  • Dosing Gases - Rotameters

    Rotameters are gas flow meters that can regulate flow. They consist of a base plate, measuring tube holders, a dosing valve and a measuring tube. The size and type of the measuring tube varies according to the flow range and gas type.

  • Model M 200 C, M 240 And M 250 - Rotameters

    Model M 200 C, M 240 And M 250 - Rotameters

    M 200 C Rotameters are gas flow meters that can regulate flow. They consist of a base plate, measuring tube holders, a dosing valve and a measuring tube. The size and type of the measuring tube varies according to the flow range and gas type.

  • Dosing Gases - Ejectors

    The Ejector is a mechanical device that generates the necessary vacuum for functioning of the dosing system. It consists of a drive nozzle, mixing chamber, non-return valve and an outlet connection.

  • Model M 300 C - Ejectors

    Model M 300 C - Ejectors

    The Ejector is a mechanical device that generates the necessary vacuum for functioning of the dosing system. It consists of a drive nozzle, mixing chamber, non-return valve and an outlet connection.

  • Model M 340 C And M 350 C - High Capacity Ejectors

    Model M 340 C And M 350 C - High Capacity Ejectors

    The high capacity ejectors series M 340 C and M 350 C are designed for dosing larger amounts of gas chlorine into the water. They are working on the venturi principle to create a vacuum required for vacuum regulator operation.

  • Dosing Gases - Motor Valve

    Electronicaly controlled electromotive dosing valve is designed for accurate dosing of gas chlorine into the water.

  • Model M 3521 C - Motor Dosing Valve

    Model M 3521 C - Motor Dosing Valve

    Electronicaly controlled electromotive dosing valve Series M 3521 C is designed for accurate dosing of gas chlorine into the water. Electromotive dosing valve Series M 3521 C is made of: compact plastic, resistant to high concentration of chlorine, precision silver dosing valve and quality driving motor. O-rings and diphragms are made of fluourocarbonic hydrogens ( VITON, TEFLON, EPDM) resistant to agressive gases. All this guarantees a long and...

  • Dosing Gases - Vacuum Regulator Systems

    System of vacuum regulators are designed for dosing gas chlorine and with minor alterations also for other gases, working on the indirect vacuum principle.

  • Model M 20 RC - Vacuum Regulators System

    Model M 20 RC - Vacuum Regulators System

    The M 20 RC System of Vacuum Regulators is designed for dosing gas chlorine and with minor alterations also for other gases, working on the indirect vacuum principle.

  • Model MR 20 RC - Vacuum Regulators System

    Model MR 20 RC - Vacuum Regulators System

    The MR 20 RC System of Vacuum Regulators is designed for dosing gas chlorine and with minor alterations also for other gases, working on the indirect vacuum principle.

  • Model MR 21 RC - Vacuum Regulators System

    Model MR 21 RC - Vacuum Regulators System

    The MR 21 RC System of Vacuum Regulators is designed for dosing gas chlorine and with minor alterations also for other gases, working on the indirect vacuum principle.

  • Model MR 40 RC - Vacuum Regulators System

    Model MR 40 RC - Vacuum Regulators System

    The MR 40 RC System of Vacuum Regulators is designed for dosing larger amounts of gas chlorine and with minor alterations also for other gases, working on the indirect vacuum principle.

  • Model MR 50 RC - Vacuum Regulators System

    Model MR 50 RC - Vacuum Regulators System

    The MR 50 RC System of Vacuum Regulators is designed for dosing larger amounts of gas chlorine and with minor alterations also for other gases, working on the indirect vacuum principle.

  • Dosing Gases - Pressure Regulator Systems

    System of pressure regulators for direct dosage of gaseous chlorine under pressure, e. g. for open swimmingpools and tanks at locations where it is not possible to provide an auxiliary power supply.

  • Model M 30 RC - Pressure Regulators System

    Model M 30 RC - Pressure Regulators System

    System of pressure regulators M 30 RC have been designed for direct dosage of gaseous chlorine under pressure, e. g. for open swimmingpools and tanks at locations where it is not possible to provide an auxiliary power supply. The capacities of the device vary from 0 - 2000 g/h, functioning on the principle of pressure in the chlorine cylinder with manual dosage adjustment.

  • Dosing Gases - Cabinets

    The cabinets system can consists of rotameter, vacuum regulator, ejector, differential presure regulator, pressure gauge and vacuum gauge.

  • Model MR 520C, MR 540C and MR 550C - Cabinet Mounted Dosing Unit

    Model MR 520C, MR 540C and MR 550C - Cabinet Mounted Dosing Unit

    The MR 500C series of dosing units is used for accurate dosing gas chlorine, sulphor dioxide and other gases in water supplies, waste water treatment plants and industry. The dosing capacity of M 520 is up to 15 kg/h, the MR 540C dosing capacity up to 40 kg/h and the dosing capacity of MR 550C is up to 200 kg/h.

  • Model Series MR 520RC, MR 540RC and MR 550RC - Cabinet Mounted Dosing System

    Model Series MR 520RC, MR 540RC and MR 550RC - Cabinet Mounted Dosing System

    The MR 500RC series of dosing unit is used for accurate dosing gas chlorine, sulphor dioxide and other gases in water supplies, waste water treatment plants and industry. The dosing capacity of MR 520RC is up to 10 kg/h, the MR 540RC dosing capacity up to 40 kg/h and the dosing capacity of MR 550 is up to 200 kg/h.

  • Dosing Gases - Switchower

    Is a device which in case of empty cylinder or container, automatically switches to full cylinder or container.

  • Model M 400, M 440 - Vaccum Switchover

    Model M 400, M 440 - Vaccum Switchover

    Vacuum switchover is a device which in case of empty cylinder or container, automatically switches to full cylinder or container. The switch occurs mechanically and no additional energy is required.

  • Dosing Fluids - Portable Disinfection Box

    Portable disinfection box is used for intervening disinfection of waterworks and reservoir.  It contain dosing pump, dosing valve, air container and portable box vith reservoir. Disinfection box can be used for different aggressive fluids (NaOCL, H2SO4 (30%).

  • Portable Disinfection Box

    Portable Disinfection Box

    Dosing range: 1,4l/h up to 11,2l/h. possibility of using different dosing pumps. possibility of controling with water gauge.

  • Dosing Fluids - Chlorine Dioxide Dosing

    Dosing equipment for liquid chlorine dioxide.

  • Chlorine Dioxide Dosing

    Chlorine Dioxide Dosing

    Chlorine dioxide analyzer M 1053 ClO2 on-line chlorine dioxide measurement. PI regulation included, galvanicaly separated current outputs, easy assembling and management, IP 65 housing.

  • Measurement

    Measuring and control devices are designed to measure and control different parameters: Free chlorine in water, pH and Redox potential, temperature of analysed media, indication and quantity of gas chlorine or other gases like Cl2, SO2, H2S, NO, HCN, CO2, H2 in the air.

  • Model Series M 2103 C - Chlorine Gas Measuring Sensor

    Model Series M 2103 C - Chlorine Gas Measuring Sensor

    The M 2103 C series Controlmatik ABW measuring probe for chlorine gas is designed to measure and indicate chlorine concentrations in the air. The probe is mounted in an IP 65 housing and is connected via connector to the amplifying electronics, which is also mounted in the IP 65 housing. Sensor is, with two-wire current loop, connected to the unit according to the enclosed scheme.

  • Model Series M 5262 C - Compact Swimmingpool Measurment & Regulation Unit

    Model Series M 5262 C - Compact Swimmingpool Measurment & Regulation Unit

    Compact swimingpool measurment & regulation unit type M 5262 C is designed for measurment and control of free chlorine, redox and pH in swimming-pools applications. The unit consists of two electrodes (gold and copper - measurement electrodes) measurement cell with mechanical cleaning and flow armature with pH and redox electrode and with three microprocessor controlled display units with PI regulator build in and with automatic temperature...

  • Model M 1054 - Chlorine Dioxide Analyzer

    Model M 1054 - Chlorine Dioxide Analyzer

    Chlorine dioxide analyzer type M 1054 C is designed for online measurement and control. The unit consists of two electrodes (platinum and copper - measurement electrodes) measurement cell with mechanical cleaning and microprocessor controlled unit with graphic display. With clear measured signal control unit evaluates and amplifies cell current and with an automatic temperature compensation we have an accurate measured signal on the output and on the...

  • Model Series M 1122 - pH Probe

    Model Series M 1122 - pH Probe

    pH measurement is used in chemical industry, in swimming-pools, potable and waste water treatment and also in different kinds of industrial measurements. Controlmatik probe M 1122 is designed for continous measurement of pH in swimming pools, potable, waste and industrial waters. With special versions of measuring electrodes it can also be used for measurement of other media.

  • Model Series M 1322 - Redox Probe

    Model Series M 1322 - Redox Probe

    Redox measurement is used in chemical industry, in swimming-pools, potable and waste water treatment and also in different kinds of industrial measurements. Controlmatik probe M 1322 is designed for continous measurement of redox in swimming pools, potable, waste and industrial waters. With special versions of measuring electrodes it can also be used for measurement of other media.

  • Regulation

    Regulation devices are designed to execute continual regulation of different parameters as: Free chlorine and pH factor, temperature and level. They have module extension and the number of actuators (valves) is not limited. The data can be transferred to PC over communication protocol.

  • Model Series M 5600 C - AQUAprocessor

    Model Series M 5600 C - AQUAprocessor

    AQUAprocessor series M 5600 C is unit built with main CPU (central processor unit) and can be expanded through various other extension modules, as to the system. It is designed to control the process values on water plants, swimmingpools, waste water plants or in industry. Regulation cabinet can be configured for manual or automatic output monitoring. The monitored data can be transmitted to a scada PC or other control system.

  • Decentralized Automation With CAN Networking

    Decentralized Automation With CAN Networking

    Plant constructors are increasingly being confronted with the demand for greater flexibility while having to cope with more intense time and cost pressures. Decentralized automation systems go a long way to meet these new requirements. Thus, for example, decentralized , intelligent compact controllers can be used to turn the components of modulary designed installations into autonomus units which communicate with a CPU via high-speed serial data bus....

  • Model Series M 4000 - Chlorine Gas Leak Detector

    Model Series M 4000 - Chlorine Gas Leak Detector

    The M 4510 series Controlmatik ABW detection unit is assembled as separate signal evaluation unit with display, limiter unit with two adjustable alarms and unit fault alarm, power supply unit and separate detection cell - probe.

  • Model Series M 5110 - Flow Proportional Control Unit

    Model Series M 5110 - Flow Proportional Control Unit

    Electronic control unit is based on a CPU unit with 4 -20 mA input. It controls the motor valve unit M 3521 C on a flow proportional basis. It is intended only for the dosage of chlorine gas proportional to the water flow. User simply connects the motor valve to the unit and connects the 4-20 mA signal from flow meter. When the flow changes, the control unit responds immediately and opens the motor dosing valve accordingly. The dosage is set at the...

  • Model Series M 3800 - Shutoff System

    Model Series M 3800 - Shutoff System

    Chlorine gas leak detector provides information about the leakage and gives signal to shut off system control panel which immediately closes all the necessary valves to prevent further leakage. The system is very easy to install. Controlmatik ABW “Shutoff system” can be used from one up to eight units (cylinder or container valves). The system uses nitrogen as pneumatic source. There is no need for compressed air source and air...

  • Filtration

    Our company provides two products for water filtration: Chlorine gas filter is used in MR 40 and MR 50 disinfection systems. Compact filtration unit is assembled in a portable container wich is placed in the area of a water reservoair.

  • Model M 3319 - Chlorine Gas Filter

    Model M 3319 - Chlorine Gas Filter

    The chlorine gas filters type M 3319 are designed to clean chlorine gas from imurities. It prevents the dosing units from damadge particularly the sensitve parts like valve seats and dosing valves and with the combination of heater wrapped around the filter also evaporates the liquid rests.

  • Compact Unit For Water Filtration And Disinfection

    Compact Unit For Water Filtration And Disinfection

    The COMPACT unit for water filtration and disinfection is s system made out of very well proofed components. The water wich leavs the unit is free from germs, odorless and naturally tasting. The unit is made out of dosing pumps for floculation and disinfection, automatic high preformance filter and all the necessary mounting and piping materials. It is assembled in a portable container wich is placed in the area of a water reservoair.

  • Disinfection

    Disinfection of drinking water provides critical public health protection. Disinfection destroys bacteria and viruses and prevents the spread of waterborne disease. The most commonly used disinfectant for both drinking water and wastewater treatment is chlorine. Its effectiveness against a wide spectrum of disease causing organisms, relatively low cost, and high reliability contribute to its popularity.

  • Model M 6000 - System For Complete Gas Chlorine

    Model M 6000 - System For Complete Gas Chlorine

    Neutralization is designed to protect storage rooms for gas chlorine, devices for dosing gas chlorine and people operating them. The device consists of a neutralization solution tank, a centrifugal pump for solution transport and vacuum ejector activation.

Products by Ecolab Engineering GmbH

  • Metering Technology

  • Model II - Pneumatic Metering Pump

    Model II - Pneumatic Metering Pump

    Pneumatic metering pump incl. control by external 3/2-port directional control valve optional. Pneumatic metering pump incl. control by integrated 3/2-port solenoid valve. Works without electrical current. Mechanical stroke adjustment. Space-saving design. Separate air bleeding. High reliability due to teflon compound diaphragm. Optional with integrated solenoid valve.

  • ELADOS - Model EMP-KKS - Diaphragm Piston Pump

    ELADOS - Model EMP-KKS - Diaphragm Piston Pump

    All metering pumps of the series ELADOS EMP-KKS operate on the piston-diaphragm principle. The diaphragm serves to feed the product whereas the piston handles the metering. Because of the continuous surplus return this metering pump operates self-venting. Therefore, the pump is appropriate for the conveying of degassing products. The cylindrical piston system without seal s made of ceramic material and offers maximum resistance to chemicals.

  • ELADOS - Model EMP III - Diaphragm Metering Pump

    ELADOS - Model EMP III - Diaphragm Metering Pump

    The ELADOS EMP III series of metering pumps is constructed on the building block principle. It comprises the drive unit, the gear box unit, the metering pump head and the electronics. Different designs of drive option allow the pump to be adapted to any processing sequence for quantity or proportional metering. The scope of delivery is rounded off by practical accessories, so forming a complete range of equipment for all...

  • ELADOS - Model EMP IV - Diaphragm Metering Pump

    ELADOS - Model EMP IV - Diaphragm Metering Pump

    The ELADOS EMP IV series of metering pumps is based on the building block principle. Devices of this series comprise the drive unit, the gear, the metering pump head and the electronics. Different electronic control variants guarantee that the pump may be adapted to any processing sequence for proportional or quantity metering.The scope of delivery is rounded off by practical accessories, so forming a complete range of equipment for all metering...

  • ELADOS - Model EMP II - Diaphragm Metering Pump

    ELADOS - Model EMP II - Diaphragm Metering Pump

    The ELADOS EMP II series of metering pumps is based on the building block principle. Devices of this series comprise the drive unit, the gear, the metering pump head and the electronics. Different electronic control variants guarantee that the pump may be adapted to any processing sequence for quantity or proportional metering. The scope of delivery is rounded off by practical accessories, so forming a complete range of equipment for all metering...

  • ELADOS - Model EDP L - Diaphragm Metering Pump

    ELADOS - Model EDP L - Diaphragm Metering Pump

    The metering pump series ELADOS EDP L is equipped with a robust three phase alternating current motor, which is controlled via an integrated frequency converter. In combination with a corresponding electronic system, the duration of the suction and metering stroke can be set to different lengths of time. This allows a multitude of applications for this pump concept. The metering rate can be set in a range of 1:100, thus facilitating a wide range of...

  • Measuring and Control Technology

  • Model LMIT 09 - Conductivity/Temperature Transmitter

    Model LMIT 09 - Conductivity/Temperature Transmitter

    The conductivity/temperature transmitter LMIT 09 offers process security due to an innovative measuring technology. The quality of a fluid is basically determined by measurement of its specific conductivity. Examples of this quality determination method are: Phase separation during CIP applications. Concentration monitoring for detergent and disinfectant solutions. Monitoring of water quality. Quality control for liquid products. Process control by...

  • Model OC - Single-Channel Measuring and Control Unit Multronic

    Model OC - Single-Channel Measuring and Control Unit Multronic

    The Multronic OC covers an extensive range of measuring and control procedures for many diverse functions in industrial and chemicals process-engineering. Every measuring and control challenge requests their extensive hardware solutions and easy adoption to individual customer needs. To meet this requirement, the modern modular system of the Mutronic OC measuring and control range is designed to provide the ideal module for each individual situation....