10 products found

Products

  • Liquid

  • Pervaporation Pilot Unit

    Pervaporation Pilot Unit

    The Convergence Pervaporation unit in combination with the Pervatech membranes allows the user to perform permeability studies at different temperatures, pressures and with different solvents.

  • Liquid Entry Pressure Tester

    Liquid Entry Pressure Tester

    The Liquid Entry Pressure (LEP) pilot is essential when characterizing membranes, especially Membrane Distillation (MD) membranes. Convergence can design and manufacture a complete system to perform research on MD membranes.

  • Permselectivity Pilot Unit

    Permselectivity Pilot Unit

    The permselectivity (PS) pilot is the ideal lab-scale solution for R&D or quality control on electrodialysis membranes. The PS test cell is equipped with a mV sensor. Based on the potential measurement and the theoretical calculation of the expected potential, the permselectivity can be calculated.

  • Gas

  • Gas Permeation Pilot Unit

    Gas Permeation Pilot Unit

    To evaluate single and mixed gases, Convergence developed customized gas mixing and gas permeation pilot. These pilots can control any gas mixture at user required pressures and flows. Evaporator units (heating up to 300°C) and integrated GC’s for composition analysis are optional. The gas independent Coriolis Mass Flowmeters accurately measures the mass flow of any gas mixture.

  • Gas Separation Pilot Unit

    Gas Separation Pilot Unit

    To evaluate single and mixed gases, Convergence developed customized gas mixing and gas permeation pilot. These pilots can control any gas mixture at user required pressures and flows. Evaporator units (heating up to 300°C) and integrated GC’s for composition analysis are optional. The gas independent Coriolis Mass Flowmeters accurately measures the mass flow of any gas mixture.

  • Standard

  • Clean Water Flux Tester (CWF)

    Clean Water Flux Tester (CWF)

    Clean water flux (CWF) is the rate of clean water permeability through the membrane at reproducible temperature and pressure. CWF is an important test to monitor membrane performance.

  • ACAS  - Control and Readout System

    ACAS - Control and Readout System

    The Convergence ACAS control box series are designed for plug and play control of several analogue or digital instruments. The system allows easy configuration, control and logging with a few touches. An ideal solution for gas mixers, lab applications and more. Software interface customization is possible for special applications.

  • Dialysis Lab Scale System

    Dialysis Lab Scale System

    Convergence Dialysis lab scale system The Convergence Inspector – Dialysis lab scale system was developed to measure the clearance of dialysis membrane modules. Different system configurations are available: R&D systems  for lab-scale modules or cells or systems for quality control of full dialysate modules in production. The Dialysis lab scale system can measure, but is not limited … Lees verder Dialysis lab scale system.

  • Dosing

  • Industrial Dosing System

    Industrial Dosing System

    Convergence developed a highly accurate custom low-flow dosing system for additive dosing, blister filling in food/pharma applications. For applications where ultra-low flows are required (0.1 g/hr) or where highly precise dosing is a plus, the Convergence dosing skids are ideal. Custom engineered according to customer needs. ATEX or GMP options are possible.

  • Lab Dosing System

    Lab Dosing System

    In order to achieve the desired quality on your test results or final product, accurate dosing is an important condition. The Convergence lab dosing system is developed for accurate dosing of any fluid. Dosing can be continious or badge wise, dependend on your requirements.