CRS Industrial Water Treatment Systems

CRS Industrial Water Treatment Systems

4 products found

Products

  • Sewage Treatment

  • Membrane Bioreactor

    Membrane Bioreactor

    CRS have delivered numerous package and permanent Membrane Bio-Reactor solutions across Australia. CRS-designed MBR’s utilise a combination of activated sludge and membrane technology to produce high quality effluent at a smaller physical footprint than their conventional ASP counterparts. Biological components of the system reduce the BOD, COD, nitrate and phosphate levels through aerobic, anoxic and anaerobic cycles, while the membrane...

  • Conventional Activated Sludge Plant

    Conventional Activated Sludge Plant

    CRS’s conventional activated sludge plants (CASP) use a combination of traditional biological processes and modern technologies to remove the unwanted components and to produce an effluent that is lower in BOD, COD, nitrogen and phosphorous.

  • Intermittently Decanted Extended Aeration

    Intermittently Decanted Extended Aeration

    Intermittently Decanted Extended Aeration (IDEA) applies modifications to a Conventional Activated Sludge Plant (CASP). The IDEA treatment process consists of 3 phases: Aeration, settling and decanting.The first phase, aeration, involves rapid surface mixing to mix the influent with the activated sludge. The mixing action aids in dissolving oxygen into the water whilst forcing the sludge into suspension from its settled state. Alum is added to bind...

  • Rotating Biological Contactor

    Rotating Biological Contactor

    Rotating Biological Contactors use a series of slow-revolving discs which are hosts to a biological film that removes pollutants from wastewater. The discs sit within a trough, with approximately 40% of their diameter covered by the liquid. As the discs rotate, waste water is retained on the bacterial layer and subjected to oxidative conditions via air contact, breaking down both organic and inorganic materials, depending on the bacterial...