Danish Wastewater Equipment A/S (DWE)

15 products found

Danish Wastewater Equipment A/S (DWE) Products

  • Wastewater Pre-Treatment -Sand/Grease Removal

  • Model KD 01 - Grit Separator

    Model KD 01 - Grit Separator

    The grit separator model KD 01 is available in five sizes with a separating capacity from 5 to 35 litres per minute. The grit separator is constructed in stainless steel and after machining completely pickled. By this, the optimal durability of the material is ensured. The grit separator is of a simple and robust construction and works at a low number of revolutions. Thus, limited maintenance and low running costs are achieved.

  • Vortex - Model KD 01.5 - Grit Chamber

    Vortex - Model KD 01.5 - Grit Chamber

    The Vortex Grit Chamber type KD 01.5 is a compact grit trap constructed of steel thereby permitting a considerable reduction of construction costs. Circular grit traps are used for separation of grit and water and if necessary of floating material. The grit trap is a welded construction consisting of an outer tank, an inner tank and if needed, a floating outlet used for separation of floating material.

  • Wastewater Pre-Treatment - Screening

  • Model KD 03 - Shaftless Screw Compactor

    Model KD 03 - Shaftless Screw Compactor

    Shaftless Screw Compactor model KD 03 are available in four sizes with capacities fra 1 to 8 cubic metres per hour. The Conveyors are particularly suitable for screen solids where separations of water and dry material is required. The Shaftless Screw Compactor are made of dip-pickled stainless steel, thus ensuring maximum durability of the material. The construction is robust and simple, ensuring limited maintenance and low operating costs.

  • Model KD 09 - Screening Hydraulic Press

    Model KD 09 - Screening Hydraulic Press

    The Screening Press Hydraulic KD 09 is used for dewatering, compaction and transport of screenings and other material that can be dewatered. Screening could be feeded to screen solids press KD by a shaft less conveyor type KD02 or by pipe. The machine is reliable in service, easy to operate and only requires limited maintenance.

  • Transport

  • Model KD 02 - Shaftless Screw Conveyor

    Model KD 02 - Shaftless Screw Conveyor

    Shaftless screw conveyors model KD 02 are available in four sizes with capacities from 5 to 20 m3 per hour. The conveyors are especially suited for products with a tendency towards tackiness and bridgebuilding e.g. sludge, damp sand and materials with heterogeneous grain sizes.

  • Model KD 04 - Sliding Gate for Conveyors

    Model KD 04 - Sliding Gate for Conveyors

    The slide gate KD 04 is a simple and solid construction, resistant to all products that are used in purification units, such as sludge and water. The gates are made of stainless steel and completely pickled. The operation can be manual, pneumatic or electrical. Inductive sensors indicate whether the gate is open or closed.

  • Process-/Aeration systems

  • Model KD 17 - Biofilter Distributor

    Model KD 17 - Biofilter Distributor

    The Biofilter Distributor Type KD 17 is specially designed for even distribution of water over a biofilter. Water is led through the central pipe and gravitates to the four rotating distribution arms. Here the water is led out of specially designed outlet orifices causing the Biofilter Distributor to rotate. It is possible to adjust rotation speed by turning some of the outlet orifices opposite the rotating direction.

  • Model KD 31  - Maxi Rotor

    Model KD 31 - Maxi Rotor

    In the past 30 years Danish Wastewater Equipment A/S has acquired a wide experience in sewage treatment. Our company has demonstrated, both with the local authorities and the manufacturing industry, that we can be relied on for sewage treatment. Sewage treatment plants world-wide have different aeration systems. There are different types and functions of aeration systems resulting also in variations with regard to efficiency and investment costs. The...

  • Clarifiers

  • Model KD 15C - Suction Scraper Bridge

    Model KD 15C - Suction Scraper Bridge

    Suction scraper bridge type KD 15C is available for circular primary and secondary tanks. The suction scraper bridge is designed based on the desire for a long service life as well as making operation and maintenance of the equipment as minimal as possible.

  • Model KD15R - Suction Scraper Bridge

    Model KD15R - Suction Scraper Bridge

    Suction scraper bridge type KD 15R for rectangular tanks. The suction scraper bridge is designed based on the desire for a long service life as well as making operation and maintenance of the equipment as minimal as possible.

  • Sludge Treatment

  • Model KD 21 - Liquid Polyring

    Model KD 21 - Liquid Polyring

    The Polyring KD 21 adds liquid polymer to the sludge before the drainage takes place and is mainly used when the SS > 1%. The Polyring consists of a welded hollow profile with holes on the inside, and an injection nozzle attached in the direction of the flow. The polymer is added through the holes as well as the injection nozzle. When the polymer is injected into the center of the sludge stream, a homogeneous distribution of the polymer is ensured....

  • Model KD 30 - Drum Thickener

    Model KD 30 - Drum Thickener

    The drum thickener Model KD 30 is a thoroughly tested machine designed to ensure low service and maintenance costs. Drum thickener model KD 30 is used for thickening of effluent sludge. A concentration from 0.8% dry solids to approximately 6% dry solids is normally achieved when dewatering municipal biological excess sludge. The drum thickener is especially suited for further treatment of sludge in e.g. sludge digesters or similar as it is possible to...

  • Regulation

  • Model KD 05.1-05.2 - Channel/ Wall Mounted Penstock

    Model KD 05.1-05.2 - Channel/ Wall Mounted Penstock

    Penstock is available in several sizes depending on the customers´s needs. The Penstock is made of stainless steel and after working it is fully pickled to ensure optimum durability. The Penstock is of a robust and simple construction ensuring limited maintenance and low running costs.

  • Model KD 34 - Adjustable Overflow Weir

    Model KD 34 - Adjustable Overflow Weir

    The adjustable overflow weir model KD 34 is designed for controlling the inlet volume in inlet structures and distributor structures. It may also be used in outlet structures and in sand traps to control the water level and in grease traps to remove grease from the surface of the water. The adjustable overflow weir is placed between two side plates. Rubber sealing strips ensure that the weir fits tightly to the side plates. These side plates may be...

  • Membrane Technology

  • Model KD 40 - MBR System

    Model KD 40 - MBR System

    We have designed a simple yet high-tech membrane filter. The filter is generally available in 3 sizes, as a single, double and triple module (-S,-D,-T) with a capacity (Bio tanks*) from ea. 3.3-6.6-9.9 m3/h *(at 10 g.SS/1.-20ᵒC). KD 40 MBR System runs using the force of gravity, which means that the installation, operation and installation costs are considerably minimised.