Davis Controls Limited

Davis Controls Limited

65 products found

Products by Arjay Engineering Ltd.

  • Oil in Water Monitors and Analyzers - PPM Oil in Water Monitors

    Oil in Water refers to products measuring the concentration (in ppm or %) of oil dissolved or emulsified oil in water. Oil on Water refers to products monitoring separated oil on the water surface.

  • Arjay HydroSense - Model 2410 - PPM Oil in Water Monitor

    Arjay HydroSense - Model 2410 - PPM Oil in Water Monitor

    The HydroSense 2410 oil in water analyser continuously monitors the water sample flowing through it for ppm concentrations of hydrocarbons. The display, signal output, and alarm can be configured within the 0-1000 ppm range. On-line monitoring for ppm concentrations of petroleum oils in effluent and produced water. The HydroSense 2410 is the engineered combination of three unique designs by Arjay for oil-in-water analysis. The sensing chamber...

  • HydroSense - Model 4410-LMP - PPM Oil in Water Monitor

    HydroSense - Model 4410-LMP - PPM Oil in Water Monitor

    On-line monitoring for ppm concentrations of petroleum oils in effluent and produced water. The HydroSense 4410 is the engineered combination of three unique designs by Arjay. The sensing chamber contributes a continuous controlled water sample while the optical sensor package hovers above the passing stream. The Arjay controller then monitors the multiple signals to provide a reliable ppm concentration output. Non-contacting sensor design...

  • Arjay HydroSense - Model 4410 OCM - Oil in Water Monitor

    Arjay HydroSense - Model 4410 OCM - Oil in Water Monitor

    The HydroSense 4410 continuously monitors a clean water sample for petroleum hydrocarbon concentrations. The display, signal output, and alarm can be configured within the 0-100 ppm range. On-line monitoring for ppm petroleum oil in industrial filtered water and cooling water. The HydroSense 4410 offers a high accuracy approach to monitoring low concentrations of free and soluble oils in water. Combining many unique design features into a compact...

  • Arjay HydroSense - Model 3420 - PPM Oil in Water Alarm

    Arjay HydroSense - Model 3420 - PPM Oil in Water Alarm

    The HydroSense 3420 continuously monitors a clean water sample for oil leaks. The display, signal output, and alarm can be configured within the 0-100 ppm range. On-line alarm for oil presence in filtered effluent and cooling water. The HydroSense 3420 offers a low-cost approach to monitoring ppm concentrations of emulsified free oils in clean water. Combining many unique design features into a compact package makes this an ideal solution to...

  • Oil in Water Monitors and Analyzers - Oil Water Separators

  • Arjay - Model 2852-OWS - Oil Water Separator & Sump Alarm

    Arjay - Model 2852-OWS - Oil Water Separator & Sump Alarm

    The sensing probe continuously monitors for the oil/water interface in a water filled sump or separator. It is typically used to control pumps, operate valves, or activate alarms. The 2852-OWS sensing probe monitors the capacitance field around the active probe tip. As the volume of separated oil increases in the separator or is drawn down toward the probe tip, the probe capacitance changes. This change is used to activate the relay for alarm...

  • Arjay - Model 4100-OWS - Oil Water Separator Level Monitor

    Arjay - Model 4100-OWS - Oil Water Separator Level Monitor

    Continuous interface monitoring of static level oil/water separators. This unique oil level system provides complete flexibility for monitoring oil water separators in one complete package. The 4100-OWS sensing probe monitors the capacitance field between the probe and the concentric shield. As the oil accumulates and displaces the water, the probe capacitance changes. This interface signal is used to provide outputs, displays and relay control.

  • Arjay - Model 2882-OWS - Oil Water Separator & Sump Alarm

    Arjay - Model 2882-OWS - Oil Water Separator & Sump Alarm

    Reliable monitoring for the oil/water interface in separators. The probe is inserted into the separator or sump to the depth of desired oil accumulation. The electronics is calibrated to the capacitance field around the probe. As oil accumulates and displaces the water, the capacitance change around the probe tip is monitored to activate the relays. Adjustable time delay and sensitivity adjustment is standard to suppress spurious alarms from...

  • Oil in Water Monitors and Analyzers - Oil/Water Interface & Profilers

  • Arjay - Model 2880-OWI - Probe Mounted Oil/Water Interface Transmitter

    Arjay - Model 2880-OWI - Probe Mounted Oil/Water Interface Transmitter

    Reliable monitoring of oil/water interface and emulsions. The sensing probe continuously monitors the capacitance of the inserted probe. As the interface or emulsion layer (rag layer) crosses over the probe, a proportional 4-20 mA output is provided. Typical applications include oil water separators, oil/water knock-out tanks, treater trains and decanting tanks.

  • Arjay - Model 2852-OWI - Remote Mounted Oil/Water Interface Monitor

    Arjay - Model 2852-OWI - Remote Mounted Oil/Water Interface Monitor

    Reliable monitoring of oil/water interface and emulsions. The sensing probe continuously monitors the capacitance of the inserted probe. As the interface or emulsion layer (rag layer) crosses over the probe, a proportional 4-20 mA output is provided. Typical applications include oil water separators, oil/water knock-out tanks, treater trains and decanting tanks.

  • Arjay - Model 4100-PRO - Multi Oil/Water Interface Tank Profiler

    Arjay - Model 4100-PRO - Multi Oil/Water Interface Tank Profiler

    Continuous profiling of oil/water interface and emulsions in tanks. Multiple capacitance probes staggered in an oil/water separator will provide a profile of the emulsion location and thickness. The 4100-PRO uses multiple sensing probes to measure the capacitance field at distinct points within the tank. The resulting profile can be used to track the vertical location of an interface/rag layer and the emulsion thickness. The data can be used for flow...

  • Oil in Water Monitors and Analyzers - Floating Oil Monitors & Controls

  • Arjay - Model 2852-HCF - Floating Oil Spill Alarm Monitor

    Arjay - Model 2852-HCF - Floating Oil Spill Alarm Monitor

    Reliable monitoring of sumps and containments for oil spills. For separated Oil-on-Water applications, Arjay offers the Hydrocarbon Float Sensor. This floating sensor monitors the surface of water in sumps, tanks, and lagoons to alert when oil has separated to the water surface. This is typically used to alert of spills or control pumps.

  • Arjay - Model 4100-HCF - Floating Oil Thickness Monitor

    Arjay - Model 4100-HCF - Floating Oil Thickness Monitor

    Continuous monitoring of separated oil thickness on a water surface. The 4100-HCF monitors a floating sensor on the water surface to indicate the thickness of separated oil. An LCD display of the thickness, analog output and relay alarms are standard. The 4100-HCF float sensor monitors the capacitance field of the water surface. As the oil accumulates on the surface, the sensor capacitance changes. This interface signal is used to provide outputs,...

  • Oil in Water Monitors and Analyzers

    Oil in Water refers to products measuring the concentration (in ppm or %) of oil dissolved or emulsified oil in water. Oil on Water refers to products monitoring separated oil on the water surface.

  • Arjay - Model 4100-OWM - Oil/Water Monitor

    Arjay - Model 4100-OWM - Oil/Water Monitor

    Continuous monitoring for % concentration of water in oil emulsions. The 4100-OWM is used for monitoring as the water phase changes to oil in a tank or pipe. A probe inserted into a tank or pipe measures the capacitance field. This is ideal for general oil-in-water testing and other liquid phase changes in a process.

  • Arjay - Model 4100-OTM - Oil Transfer Monitor

    Arjay - Model 4100-OTM - Oil Transfer Monitor

    Continuous interface monitoring of vapour, oil and water phases in transfer pipes. Over 40 years of Arjay’s field proven HF capacitance experience has been applied to the 4100-OTM series monitors. This unique design provides complete flexibility for monitoring liquid transfer applications.

  • Leak Detection Alarms

    Be alerted of any leaks that occur with reliable leak detectors from Arjay Engineering. The purpose of these area leak detection alarms is to detect and monitor the accumulation of liquid leaks in containments, floor spaces, and double wall tanks that are normally dry areas. When a liquid intrudes into this space, an alarm will sound to warn you that a leak is present. With over 40 years of capacitance experience, we’ve designed and manufactured all of our leak detection instruments wi

  • Arjay - Model 2852T-ILA - Interstital Tank Leak Alarm

    Arjay - Model 2852T-ILA - Interstital Tank Leak Alarm

    Reliable monitoring of the interstitial space in double wall tanks. Leaks from above or underground storage tanks can be costly, dangerous to worker health, and environmentally unsafe. Arjay provides sensors to monitor for leaks and spills. Probe variations can extend these applications to meet your specific needs. For double walled tanks, above or underground, the Interstitial Leak Alarm is designed to alarm on a dry vs. wet condition within the...

  • Arjay - Model 2852-LPS - Leak Pad Sensor (Area Leak Alarm)

    Arjay - Model 2852-LPS - Leak Pad Sensor (Area Leak Alarm)

    Reliable monitoring of liquid leaks in containments and floor spaces. The Leak Pad Sensor (Area Leak Alarm) can be placed on containment floors and pans to alert on a dry vs. wet condition. These can be placed around a tank, in electrical and computer vaults, and in pump stations. The 2852-LPS sensor monitors the capacitance field between the sensor pad and the floor. A single push button calibration at the controller locks in on the capacitance field...

  • Capacitance Monitors

    Capacitance monitors and probes can be used for a variety of applications to monitor for product characteristics and process changes. For reliable, continuous monitoring of solids and liquids, choose Arjay Engineering as your trusted capacitance monitor source. Our unique system effectively monitors the dielectric of solids and liquids for concentration, moisture content, blending, quality, changes, and more. Any changes to the overall dielectric can be tracked for process control and trends

  • Arjay - Model 2852-CAP - Capacitance Monitor

    Arjay - Model 2852-CAP - Capacitance Monitor

    Reliable monitoring of process conditions and concentration. The sensing probe continuously monitors the dielectric stability of the product. Changes in dielectric can be tagged to product quality changes, moisture content, emulsions, concentrations and product phase changes. Typical applications include liquid blending, moisture content of solids, upset product intrusion or separation, and general product quality.

  • Arjay - Model 4100-CAP - Capacitance Monitor

    Arjay - Model 4100-CAP - Capacitance Monitor

    Continuous capacitance/dielectric monitoring of liquids and solids. This unique system provides complete flexibility for monitoring solids and liquids for concentration, moisture content, blending, and quality control.

  • Level Transmitters and Switches for Liquid and Solids - On/Off Level Alarm Switches

  • Arjay - Model 2882-LS - Probe Mounted Solid/Liquid Level Switch

    Arjay - Model 2882-LS - Probe Mounted Solid/Liquid Level Switch

    Reliable level alarm and control of liquids and solids. As a liquid or solid rises or lowers around the probe, the capacitance field changes. This is monitored and used to control the two on-board relays. Each relay includes full differential control to allow the relay to activate and de-activate between two distinct at user determined points on the probe. This can be used for pump and valve control between high and low level points. Adjustable time...

  • Arjay - Model 2852-LS - Two Point Solid/Liquid Level Switch

    Arjay - Model 2852-LS - Two Point Solid/Liquid Level Switch

    Reliable level alarm and control of liquids and solids. The sensing probe continuously monitors the level changes in a vessel to alarm at user defined set points. It is typically used to control pumps and valves, alarm of high or low product conditions, or alert to potential overflow and dry conditions. The 2852-LS sensing probe monitors the capacitance field around the probe. As the level of product increases or decreases in the vessel, the probe...

  • Level Transmitters and Switches for Liquid and Solids - Continuous Level Monitors

  • Arjay - Model 2880-LT - Probe Mounted Level Transmitter

    Arjay - Model 2880-LT - Probe Mounted Level Transmitter

    Reliable monitoring of liquids and solids for a continuous level output. The probe continuously monitors product levels to provide a proportional level signal for pumps, alarms or control system interface. The 2880-LT sensing probe monitors the capacitance field around the active probe. As the volume of product increases in the vessel, the probe capacitance changes. A 4-20 mA output signal is provided for interface with customer controls and systems....

  • Arjay - Model 2852-LT - Remote Mount Level Monitor

    Arjay - Model 2852-LT - Remote Mount Level Monitor

    Reliable level monitoring of liquids and solids for measurement and control. The unit continuously monitors the liquid or solids level in a tank, stand-pipe or containment. Outputs include analog, digital, and relay control for interface to alarms, valves, pumps and other process monitoring equipment. The 2852-LT sensing probe monitors the capacitance field around the probe. As the product rises in the tank or vessel the probe capacitance increases....

  • Arjay - Model 4100-LEV - Level-Ease Monitor

    Arjay - Model 4100-LEV - Level-Ease Monitor

    Continuous level monitoring of liquids and bulk solids. This unique level system provides complete flexibility for monitoring one or more tanks in one complete package. The Level-Ease 4100 sensing probe monitors the capacitance field between the probe and it’s concentric shield of the tank wall. As the level of product increases, the probe capacitance changes. This level signal is used to provide outputs, displays and relay control.

  • Foam Control Monitors

    To monitor for foaming conditions in process applications. Outputs can be used for chemical injection and alarm. Choose Arjay Engineering as your trusted provider for a full product line of foam control monitors. Whether you prefer a system that’s remote mounted or not, we carry both to suit your needs. These foam control systems provide reliable monitoring of foaming conditions in process applications. Built with a user-friendly interface, our systems are made to be set up and calibra

  • Arjay - Model 2880-FCM - Foam Control Monitor

    Arjay - Model 2880-FCM - Foam Control Monitor

    Reliable monitoring of foaming conditions in process applications. Over 40 years of capacitance experience stands behind the 2880-FCM transmitter. The sensing probe continuously monitors the capacitance of the inserted probe. As the foam intrudes into the normal air or vapour space of the probe, the capacitance changes and a proportional signal output is provided. The unique processor and oscillation frequency combination make the 2880-FCM ideal for...

  • Arjay - Model 2852-FCM - Remote Mounted Foam Control Monitor

    Arjay - Model 2852-FCM - Remote Mounted Foam Control Monitor

    Reliable monitoring of foaming conditions in process applications. Over 40 years of capactiance experience stands behind the 2852-FCM Foam Control Monitor. The sensing probe is tuned to the normal operating conditions of the gaseous or air phase in your process. The intrusion of foam around the probe will cause a capacitance change that is monitored by the remote controller. Variations in foam levels will result in a proportional output. Typical...

  • Dry Pump Monitors / Presance-Absence Detectors

    Protect your pumps and equipment effectively with dry pump monitors from Arjay Engineering. Our unique sensor technology continuously monitors the change from a wet to a dry condition. With no moving parts or intrusion, it allows the system to monitor the changes in the stream flow efficiently and without interruption. When this change or dry run occurs, an alarm will sound to alert you and shut down the pump. For ultimate versatility, our pump protection system can respond and react to any

  • Arjay - Model 2852-DPM - Dry Pump Monitor

    Arjay - Model 2852-DPM - Dry Pump Monitor

    Pipe monitoring for dry conditions to protect pumps and equipment. Combining the technology of capacitance with unique sensor designs provide non-intrusive monitors for liquid handling systems. The result is a low cost and low maintenance system to determine the presence or absence of product in a pipe or pump. The 2852-DPM sensor monitors a cross sectional area of the pipe and locks in on the capacitance field of the fluid passing through. A change...

  • Liquid Interface Alarm Systems and Transmitters

    Count on Arjay Engineering for reliable interface monitoring and alarm between two liquids. Our liquid interface alarm systems and transmitters are extremely effective in continuously monitoring liquids in a vessel. If a dielectric change occurs across the active probe, an output or alarm will sound to alert you of the change. In general, interface monitoring is typically used in applications such as oil/water interface in pipes and separators, water accumulation in fuel tank bottoms, and pr

  • Arjay - Model 2852-IFA - Liquid Interface Alarm

    Arjay - Model 2852-IFA - Liquid Interface Alarm

    Reliable interface monitoring for alarm between two liquids. The sensing probe continuously monitors the liquid in a vessel and will alarm when the interface of a different dielectric liquid crosses the active probe. Typical applications include oil/water interface in pipes and separators, water accumulation in fuel tank bottoms, and product phase changes in process piping streams. The 2852-IFA sensing probe monitors the capacitance field around the...

  • Plugged Chute Detector Systems

    Arjay Engineering is proud to manufacture plugged chute detector systems to ensure all your operations are running smoothly and efficiently. Our system detects the presence of a blocked condition in a chute and sounds an alarm to alert the operator of build-up. Featuring technology with unique sensor designs, our low-cost and low-maintenance plugged chute detector system shuts down equipment before damage. For ultimate versatility, its highly advanced technology can respond to all types of b

  • Arjay - Model 2852-PCD - Plugged Chute Detector

    Arjay - Model 2852-PCD - Plugged Chute Detector

    Non-intrusive monitoring of chutes and hoppers for bulk material detection. Combining the technology of capacitance with unique sensor designs provide non-intrusive monitors for bulk solids handling systems. The result is a low cost and low maintenance system to determine the presence or absence of product in a pipe, chute, or other vessel. Plugged Chute Detectors monitor a chute or vessel using a sensor mounted flush with the chute wall. The sensor...

  • Others

  • Arjay - Gas Detection Systems

    Arjay - Gas Detection Systems

    For parking garages, arenas, warehouses, maintenance facilities and more. Arjay Engineering is proud to be an industry-leading supplier of industrial gas detectors for a wide variety of industries. Our extensive line of gas monitoring equipment offers quality products for all types of applications. With over 40 years of experience in the industry, it’s our goal to keep you and your employees safe from hazardous gas exposure. That’s why...

Products by Spirax Sarco Inc.

  • Flowmeters

  • Spirax Sarco - Model ILVA Series - Gilflo Flowmeters

    Spirax Sarco - Model ILVA Series - Gilflo Flowmeters

    The Gilflo flowmeter offers an unrivalled 100:1 turndown ratio, requires short pipe straight runs, and can be used to meter most industrial fluids including steam and gases. Available in pipeline sizes 2'' to 16''.

  • Spirax Sarco - Orifice Plate Flowmeters

    Spirax Sarco - Orifice Plate Flowmeters

    Spirax Sarco orifice plate flowmeters are especially suited for installations in pipelines where the need for high accuracy and turndown is not critical. They can be interfaced with flow computers to give up-to-the-minute data at the touch of a button. Available in pipeline sizes from 1'' upwards.

  • Spirax Sarco - Transmitters

    Spirax Sarco - Transmitters

    Spirax Sarco provides a wide range of differential pressure cells, as well as pressure and temperature transmitters specifically matched with our flowmeters to provide the inputs necessary for mass flow measurement in steam, and energy measurements in water.

  • Spirax Sarco - Target Variable Area (TVA) Flowmeter

    Spirax Sarco - Target Variable Area (TVA) Flowmeter

    The TVA (Target Variable Area) does not rely on measurement of differential pressure across the flowmeter, measuring instead the force generated by the deflection of the cone via a series of high quality strain gauges. The TVA has an internal temperature sensor enabling full density compensation for saturated steam applications, removing the need for additional sensors and flow computers.

  • Spirax Sarco - Model RIM10 Series - Insertion Turbine Flowmeters

    Spirax Sarco - Model RIM10 Series - Insertion Turbine Flowmeters

    Spirax Sarco's insertion turbine flow meters provide significant cost savings for line sizes from 3 to 80'' without compromising performance. With high accuracy, wide turndown, and a unique low-mass rotor design without welded joints, the insertion turbine flow meter gives you the benefit of 40 years of practical experience. The unique insertion design measures liquids or gases, including steam, and can be installed without line shutdown.

  • Spirax Sarco - Model VLM10 - Vortex Meters

    Spirax Sarco - Model VLM10 - Vortex Meters

    Spirax Sarco Vortex meters have no moving parts, rugged construction, and microprocessor-based electronics for high accuracy in many flow metering applications including liquids, gas and steam. Vortex flow meters provide accurate measurement with lower maintenance, and lower total cost of ownership than other flow meter technologies in line sizes 1' to 80'.

  • Spirax Sarco - Electromagnetic Flowmeters

    Spirax Sarco - Electromagnetic Flowmeters

    Spirax Sarco electromagnetic flow meters measure all electrically conductive liquids with and without solids in the fluid including water, wastewater, slurries, chemicals, and even in mining applications. The electromagnetic, or mag, flow meters require no maintenance, and are highly accurate and repeatable measurement without pressure drop making it the technology of choice for many applications.

Products by SIKA Dr. Siebert & Kühn GmbH & Co. KG

  • Sensors and Measuring Instruments - Industrial Thermometers

  • Model B - Industrial Thermometer with Male Thread

    Model B - Industrial Thermometer with Male Thread

    Long service and measurement accuracy without wear for industrial applications such as machine and plant engineering as well as marine components and utilities in marine engineering. Nominal size 200 mm, Aluminum, V-shaped, completely polished, gold-coloured anodized (or silver-coloured upon request). Numerals of reading scale printed on the right side. Printing black-colored for easy readability. Straight types adjustable to any desired viewing...

  • Sensors and Measuring Instruments - Dial Thermometers

  • Model 341 - 347 - Dial Thermometers

    Model 341 - 347 - Dial Thermometers

    Type 341 to 347 dial thermometers are local thermometers with a crimped-on ring cases. Cases, immersion tubes and connections are made of stainless steel. All devices comply with EN 13190 and meet the class 1 requirements. The devices are available in the nominal sizes from 63 to 250 mm. Through the crimped cases, the thermometers are permanently sealed (IP65) and they are ideal for case fillings with silicone oil (optional). We recommend this version...

  • Test and Calibration Instruments - Temperature Calibrators

  • Model TP 17200 - Temperature Calibrators

    Model TP 17200 - Temperature Calibrators

    SIKA temperature calibrators can be used everywhere, including on site in workshops, test and measurement rooms as well as laboratories. They cover a broad spectrum of industries with diverse applications.

  • Test and Calibration Instruments - Pneumatic Hand Test Pumps

  • Model Type P 4 - Pneumatic Hand Test Pump

    Model Type P 4 - Pneumatic Hand Test Pump

    The test pumps and pressure generators are designed to enable the direct connection of all pressure systems to be tested using adapters. The test sample is easily connected using the rugged industrial hose with integrated quick coupling and supplied adapters. The reference is fitted directly at the top of the pump using a positioning adapter. The required test pressure is initially generated using the handles and then adjusted precisely with the fine...

  • Flow Measuring Instruments - Flow Switches

  • Model VHS - Flow Switch

    Model VHS - Flow Switch

    Our SIKA flow switches are used for monitoring volume flows. Depending on requirements, these are available for various nominal widths and set-point ranges. Our modular approach allows product designs and options to be matched to a wide variety of applications. The broad temperature and pressure ranges, choice of materials and connection options ensure a very high level of versatility, which is why SIKA flow switches are used in so many areas:

  • Flow Measuring Instruments- Flow Sensor

  • Vortex - Model VVX 15 - Flow Sensor

    Vortex - Model VVX 15 - Flow Sensor

    Alternate vortices rotating in opposite directions are generated behind a bluff body immersed in a flow. The vortices detach from the edges of the bluff body and form a Kármán vortex street in the fluid stream. The distance between the single vortices is constant. The frequency of the vortices flowing past a sensor depends on the flow rate and is proportional to the flow. The sensor detects these vortices which are then converted to an...

Products by Sika USA Inc.

  • Flow Instruments

  • Sika - Model Type VHS06 & VK306 - Flow Switches

    Sika - Model Type VHS06 & VK306 - Flow Switches

    Universal Flow switches for ¾...8“ . The paddle simplytrimmed to needed length. Glass fiber reinforced plastic paddle or stainless steel paddle for higher flow rates. Threaded adapters for tees or for direct insertion into pipes. Easy installation due to union nut.   

  • Turbotron - Model VTH-25 - Turbine Flow Meters

    Turbotron - Model VTH-25 - Turbine Flow Meters

    Sapphire bedded turbines for serial applications Insertion turbines for blocks and fittings. OEM turbines for potable water applications. Stainless steel turbine with flanged orthreaded connection.

  • Sika - Model VTR Series - Stainless Steel Turbine Flow Meters

    Sika - Model VTR Series - Stainless Steel Turbine Flow Meters

    SIKA's VTR turbine flow sensor allows you to determine precisely, depend. ably and easily the flow rates of different liquids, such  as water and other low viscosity liquids, under the most severe conditions. The VTR sensor is particularly robust and, due to thewide range of nominal diameters and five different pick-ups. can cope with even the most severe conditions. The characteristic variable is the K-factor (pulses per litre) which is specific...

  • Electronic and Calibration Instruments

  • Mechanical Measuring Instruments

  • Sika - Model Type 6312 - 1372 - Diesel Engine Thermometers

    Sika - Model Type 6312 - 1372 - Diesel Engine Thermometers

    Diesel engine dial thermometer types 6312 to 1372 are the ideal solution for local temperature measurement of fluids and gases on large diesel engines, e.g. for marine propulsion or in the diesel electric power generation area. Depending on the display range, they are useful for measuring exhaust gas, cooling water, lubricating oil and charge air temperatures.

  • Marine Instruments

  • Sika - Model PM Series - Precision Pressure Calibrators

    Sika - Model PM Series - Precision Pressure Calibrators

    Pneumatic  and  hydraulic  pressure  calibrators of series  PM   distinguish  themselves  especially  by  high  accuracy of measurement and compact type of construction. Reference pressures of -1 up to 1000 bar can be generated in a fast and simple way. Exact adjustment of the desired pressure  is carried out by a precision adjustment valve. The reference pressure is indicated via an...

  • Sika - Model UC - Universal Mono and Multifunction Calibrator

    Sika - Model UC - Universal Mono and Multifunction Calibrator

    Digital, menu driven value adjustment, 6 keys and navigator. Background-lit, graphic LC-display, 160 x 160 pixel. Step-, ramp-, cycle-, HOLD- and scaling functions. Serial USB PC interface (type mini B]. Power supply via L x 1.5 V batteries (AA type]. Dimensions approx. 160 x 85 x 45 mm. Weight approx. 300 g.

Products by Weschler Instruments

  • Meters- AC Ammeters

  • Premo - Bar Graph AC Ammeters

    Premo - Bar Graph AC Ammeters

    DC Current & Voltage, AC Current & Voltage, Process Loops, Frequency / Counts, Speed Pickups / RPM, Quadrature, Power (DC & Single Phase), Thermocouples, RTDs, Load Cells / Strain Gauges, LVDTs, Pressure, Resistance / Potentiometers, pH / ORP. A deluxe bargraph indicator with enhanced control capabilities. Flexible and highly configurable for display of electrical signals and process parameters. Combines the precision of a digital...

  • Quatro - Bar Graph AC Ammeters

    Quatro - Bar Graph AC Ammeters

    DC Current, AC Current, DC Voltage, AC Voltage, Frequency, Process Loops, Thermocouples, RTDs, Load Cells / Strain Gauges, Speed Pickups / RPM, Pressure, Resistance / Potentiometers. A flexible and highly configurable indicator for display of electrical signals and process parameters. Combines the precision of a digital readout with a vivid proportional display. Ideal for new applications and replacement of existing analog gauges or digital...

  • Tri-Color Edgewise Bargraph Meters

    Tri-Color Edgewise Bargraph Meters

    The Weschler Instruments BG 'TC', TriColor BarGraphs provide the quickest way to spot problems in your process control panels with bright changing colors. Quick identification of trouble conditions can help prevent equipment damage or production loss, thus reducing down time and maintenance costs, and improving operational safety. Each 40 segment LED (Light Emitting Diode) of the BG TC family has the ability to illuminate as Red (Danger), Yellow...

  • Sensors and Transmitters- Current Transducers

  • Sensors and Transmitters- Current Transformers

  • Test Equipment- Calibrators

  • Model CA71 - Handy Multifunction Calibrator

    Model CA71 - Handy Multifunction Calibrator

    Signal source: DCV, DCA, Resistance, RTD, TC (10 kinds), Frequency, Pulse. Measurement: DCV, DCA, ACV, Resistance, RTD, TC (10 kinds), Frequency, Pulse. Features: Simultaneous signal source and measurement capacity, a wide array of useful functions, Easy operation, Online communication function.

  • Test Equipment- Clamp Meters

  • Model Fluke 323, 400A - AC Clamp Meter

    Model Fluke 323, 400A - AC Clamp Meter

    The Fluke 323 Clamp Meter  measures AC and DC voltage, AC current, resistance, and continuity. The Fluke 320 series are designed to perform in the toughest environments and provide noise-free, reliable results users can trust to confidently diagnose problems. True-rms measurements and optimized ergonomics make the Fluke 320 Series Clamp Meters the best general troubleshooting tools for commercial and residential electricians.