Eijkelkamp Soil & Water

53 products found

Eijkelkamp Soil & Water Products

  • Augering & Soil Sampling Equipment

  • Eijkelkamp - Model 01.11.SE - Ergonomic Hand Auger Set for Heterogeneous Soils - 5 M

    Eijkelkamp - Model 01.11.SE - Ergonomic Hand Auger Set for Heterogeneous Soils - 5 M

    The ergonomic hand auger set for heterogeneous soils is used to carry out manual drilling and sampling in a great variety of different soils in an ergonomically sound way. It is particularly suitable for general soil investigation (description of the layering, geology, archaeology) as well as taking samples for such activities as environmental research. It can carry out drillings to a depth of 5 metres, depending on the depth of the groundwater, the...

  • Model 04.16 - Soil Coring Kit for Chemical Soil Research

    Model 04.16 - Soil Coring Kit for Chemical Soil Research

    Soil sampling for the determination of the presence of very volatile components such as benzene, toluene, xylene and  chlorinated hydrocarbons should be executed with samplers that prevent the sample from being exposed to air. Preferably the sampling must be done without disturbance of the soilaggregates to prevent mixing with air.

  • Model 04.02.SA - Bi-Partite Gouge Auger Set, to 5 M, Bay

    Model 04.02.SA - Bi-Partite Gouge Auger Set, to 5 M, Bay

    Hand-operated equipment can be applied for soil research up to a depth of 5 to 10 meter. The gouge augers have a mutual quality, they are all fitted with an almost half cylindrical operational part with parallel cutting edges running vertically, justifying the name gouge auger. This operational part may vary in length as well as in diameter. The most suitable length depends on the penetration resistance, the substance of the soil and the required...

  • Eijkelkamp - Model Cobra TT - Percussion Drilling Set for Heterogeneous Soils

    Eijkelkamp - Model Cobra TT - Percussion Drilling Set for Heterogeneous Soils

    The Eijkelkamp percussion drilling set for heterogeneous soils with gasoline powered percussion hammer (Cobra TT), is standard equipped for drilling to a depth up to 5 meter. The complete set contains: a gasoline driven percussion hammer with accessories and wooden transport box, various extension rods, coupling sleeves, percussion gouges (combination type for various types of soil) in various diameters and lengths, a core sampler for PVC sample tubes...

  • Model HM1812, RD32 - Percussion Drilling Set Hammer for Heterogeneous Soils

    Model HM1812, RD32 - Percussion Drilling Set Hammer for Heterogeneous Soils

    With the percussion drilling set for heterogeneous soils with heavy electrical percussion hammer (HM 1812), the percussion gouges are hammered into the soil using an electrically driven percussion hammer with 72.8 Joule strike capability. The advantages of this hammer are: no petrol vapours and exhaust gasses directly over the sample. The set contains: an electrically driven percussion hammer with accessories, an aggregate (continuous power 3.4 kVa),...

  • Eijkelkamp - Model 04.09 - Stainless Steel Peat Sampler, Set to a Depth of 10 m

    Eijkelkamp - Model 04.09 - Stainless Steel Peat Sampler, Set to a Depth of 10 m

    The stainless steel peat sampler is in fact a kind of gouge auger. The peat sampler is pushed into the soil manually. The sample containing part is a half cylinder. The peat sampler distinguishes itself from the standard gouge auger as its cone is massive. The sample containing section is sealed off by a plate (fin) that can pivot around the axle in the middle of the sampler and that is fitted with a cutting edge on one side. Having arrived at the...

  • Eijkelkamp Akkerman - Model 04.11 - Core Sampler Set

    Eijkelkamp Akkerman - Model 04.11 - Core Sampler Set

    Using the Akkerman core sampler, samples are taken in stainless steel sampling tubes in auger holes or casing tubes (above as well as under the groundwater level, casing tubes with minimal diameter 100 mm) up to a maximum depth of 50 m. The Akkerman core sampler is used in combination with a tripod and hand winch. The sampling tube is beaten into the soil using a falling hammer. After sampling the sampling tube can be sealed off with the PE covers. A...

  • Wardenaar - Model 05.09 - Peat Profile Sampler

    Wardenaar - Model 05.09 - Peat Profile Sampler

    The peat profile sampler, type Wardenaar, is an apparatus for sampling intact, undisturbed peat profiles in peat lands up to a depth of 1 meter. The peat profile sampler consists of a rectangular stainless steel box casing, divided lengthwise into two halves, with very sharp specially shaped cutting edges at the base. The handgrip hinging with both halves allows both halves to be pushed into the soil alternatingly. A clamp mechanism on...

  • Eijkelkamp - Model 05.08 - 10 x 5 cm, 50 cm Profile Soil Sampler

    Eijkelkamp - Model 05.08 - 10 x 5 cm, 50 cm Profile Soil Sampler

    The profile sampler allows taking of a sizeable and virtually undisturbed sample up to a depth of approximately 40 cm (10 cm wide and 5 cm across). All roots, up to a cross-section of 2 cm, are included in the sample. When sampling, both U-shaped gutters are pushed alternatingly into the soil, until the required depth is reached, after which one side of the handle is pulled sharply upwards and the other pushed downwards, thus clamping the profile. The...

  • Model 05.02 - 2 m Depth Bi-Partite Root Auger Set

    Model 05.02 - 2 m Depth Bi-Partite Root Auger Set

    By applying the bi-partite root auger almost undisturbed, uniform soil samples can be taken in layers of maximal 15 cm. The bi-partite root auger consists of a bottom part fitted with an exchangeable drilling-crown and a short unscrewable top part (handle) with a beating head.

  • Model 04.17 - Split Tube Sampler Ø 53 mm, Set

    Model 04.17 - Split Tube Sampler Ø 53 mm, Set

    The split tube sampler is an apparatus for rapid undisturbed sampling at the surface. The apparatus is very suitable for research on root systems, fertilizing and soil biology. The set consists of a split tube sampler with a handle with beating head, hammer with nylon heads (shock-absorbing), sample liners, storage containers and a steel lifting jack with lever and chain. The split tube sampler consists of two stainless steel tube halves with a...

  • Model 99.14 - Fieldcart, Aluminium, Collapsible, 15kg

    Model 99.14 - Fieldcart, Aluminium, Collapsible, 15kg

    You are also fully-mobile in the field with the collapsible fieldcart. The sturdy aluminium construction makes the fieldcart (with inflatable tires) very suitable for carrying all kinds of equipment in the field to a maximum loading weight of 150 kg. The cart is suited to transport packages with dimensions 120 x 56 cm. The cart, when folded (107 x 27 x 58 cm), takes up very little room, weighs only 15 kg and can be easily transported in a station...

  • Eijkelkamp - Model 01.12.16.10.B - Batch Sampler Ø 10 cm

    Eijkelkamp - Model 01.12.16.10.B - Batch Sampler Ø 10 cm

    Sampling during batch inspection and sand dredging. Sampling loose discharged sand, dry coarse sand and fine gravel is a special job. Sampling according an imaginary grid, standing on top of the discharged material is not easy.

  • Model 04.18.07.01 - Mechanical Rod Puller, 1-Man Operated

    Model 04.18.07.01 - Mechanical Rod Puller, 1-Man Operated

    Without too much effort the gouges can be extracted from the soil by using rod pullers, which can be provided in different designs. The first gouge can easily be extracted using a rod puller fitted with a rod puller extension system (art. no. 04.18.07.05). If the gouge still is partially stuck in the top soil, then it can be removed using a lifting jack (art. no. 05.07.03) with lever and chain (art. no. 05.07.14). In case of the other (deeper) gouges,...

  • Model 04.19.43.01 - Foil Insertion Kit for Core Sampler

    Model 04.19.43.01 - Foil Insertion Kit for Core Sampler

    A set which you can use the core sampler of the percussion drilling set with a thin PE foil liner. Over the years there where some remarks/complaints about the fact that it was a very difficult and elaborate job to get the sample out of the tube. This was only possible either by cutting or sawing. With the new system this transparent synthetic sampling tube is replaced by a long plastic foil.

  • Model Ø 63mm, RD32, 100cm - Core Sampler

    Model Ø 63mm, RD32, 100cm - Core Sampler

    In addition to ordinary percussion gouges it is possible to apply a core sampler with a synthetic sampling tube or foil liners. These are transparent to facilitate immediate visual inspection in the field. The special cutting head has been fitted with an exchangeable core catcher in order to avoid loss of sample or sample contamination. The undisturbed sample can be sealed for transport to a laboratory.

  • Model Ø 23 mm - Grass Plot Sampler Small

    Model Ø 23 mm - Grass Plot Sampler Small

    These stainless steel gouge augers with different dimensions consist of a steel auger pipe, a collecting bucket and a stick with a steel handle. The auger pipe is filled by pressing the collecting bucket with your foot. Because of the conical shape of this pipe the sample is easily pushed toward the collecting trough when the next sample is taken. The correct number of samples per hectare depends, among other factors, on the type of crop, the relief...

  • Eijkelkamp - Model 04.06 - Gouge Auger Set for Top Layers

    Eijkelkamp - Model 04.06 - Gouge Auger Set for Top Layers

    A correctly dosed fertilization is a condition for high yield and good quality. From economic and ecological perspectives it is therefore necessary to check the state of the soil. After analysis of the samples taken with this set it is possible to determine a fertilization program. Two gouge augers have been included in the set for sampling top layers.

  • Eijkelkamp - Model P, 114/60/90 - Bi-Partite Gouge Auger

    Eijkelkamp - Model P, 114/60/90 - Bi-Partite Gouge Auger

    This bi-partite gouge auger distinguishes itself from other gouges by the cylindrical tapered cutting head at the bottom side of the gouge that, when the auger is pushed into the soil, cuts a cylinder shaped piece from the soil. As a result the auger does not need to be revolved around its axis after being inserted, as the other gouge augers need to be (less sensitive to torsion). The tapered cutting head also holds the sample better. For this auger...

  • Eijkelkamp - Model 04.04 - Gouge Auger Set for Stepwise Sampling

    Eijkelkamp - Model 04.04 - Gouge Auger Set for Stepwise Sampling

    Hand-operated equipment can be applied for soil research up to a depth of 5 to 10 meter. In this product information leaflet a number of gouge augers are described. Their mutual quality is that they are all fitted with an almost half cylindrical operational part with parallel cutting edges running vertically, justifying the name gouge auger. This operational part may vary in length as well as in diameter. The most suitable length depends on the...

  • Eijkelkamp - Model 04.01.SA - Single Gouge Auger Set, Standard, 1 m

    Eijkelkamp - Model 04.01.SA - Single Gouge Auger Set, Standard, 1 m

    Hand-operated equipment can be applied for soil research up to a depth of 5 to 10 meter. In this product information leaflet a number of gouge augers are described. Their mutual quality is that they are all fitted with an almost half cylindrical operational part with parallel cutting edges running vertically, justifying the name gouge auger. This operational part may vary in length as well as in diameter. The most suitable length depends on the...

  • Eijkelkamp - Model 02.01.01 - Aluminium Tripod, Cap 6.5 kN (650 kgf)

    Eijkelkamp - Model 02.01.01 - Aluminium Tripod, Cap 6.5 kN (650 kgf)

    A tripod is an essential part of a bailer boring set (cable tool drilling equipment). Also drillings at greater depths, or the application of heavier augering or soil core sample equipment require the use of a tripod. In selecting a tripod, working height, weight, and maximum load capacity (= tensile force) are usually determinant factors. However, the range of application is of such a magnitude, that the selection of the tripod depends strongly on...

  • Eijkelkamp - Model 15.09 - Standard Heavy Lifting Set

    Eijkelkamp - Model 15.09 - Standard Heavy Lifting Set

    The heavy lifting set is usually used in combination with heavier (hand-operated) drilling equipment for water wells. The tripod and the winch are used, among other things, for lowering and lifting drilling equipment (e.g. the bailer), or for removing the casing tubes.

  • Eijkelkamp - Model 01.16 - Prospecting Kit for Geological Surveys

    Eijkelkamp - Model 01.16 - Prospecting Kit for Geological Surveys

    Eijkelkamp Soil & Water composed a prospecting kit for general geological surveys. The kit can be used for augerings in heterogeneous soils (agricultural and environmental soil research), to improve the mobility it comprises less different auger types. In this way it can be transported in a carrying bag. All augers, handles and extension rods are packed in a backpack. With this standard kit it is possible to execute manual augerings to a depth of...

  • Eijkelkamp - Model Ø 8cm,15cm,114cm - Single Root Auger

    Eijkelkamp - Model Ø 8cm,15cm,114cm - Single Root Auger

    Root research is executed to improve the insight in the possibilities for root growth (depth and concentration) of the root system of trees and plants. In general it is important to all plants to have a dense and extensive root system in the soil. An extensive root system allows the plant to benefit from a large volume of soil. If sufficient quantities of nutrients and water are present the absorption will be larger if the root system is more...

  • Eijkelkamp - Model 01.12.SA - Hand-Operated Bailer Boring Auger Set 7m

    Eijkelkamp - Model 01.12.SA - Hand-Operated Bailer Boring Auger Set 7m

    The standard bailer boring auger set is suitable for augerings to a depth of about 7 meter. The set is very suitable for in addition to exploratory soil augering and sampling inserting monitoring well pipes for groundwater level measurements and for sampling. This compact set can be carried easily in a station car and is easy to use in the field. It can be used by one person. The set contents include: various types of soil augers to reach the...

  • Eijkelkamp - Model 04.15.SA - Liner Sampler, Set for Soft Soils, 7 m

    Eijkelkamp - Model 04.15.SA - Liner Sampler, Set for Soft Soils, 7 m

    With these sets, with bayonet connection, undisturbed soil samples can be taken in a liner applying a stainless steel core sampler with sample tubes and cutting head. In soft soils the sampler is pressed into the soil, possibly using the push/pull handle. The set contains, among other things: a hand auger for pre- and clean drilling of the bore hole, the core sampler with the sampler tubes, the sample foils, soil sample containers and maintenance...

  • Eijkelkamp - Model 10.100 - Lost Cone Drilling and Standard Set

    Eijkelkamp - Model 10.100 - Lost Cone Drilling and Standard Set

    Drilling a bore hole is often combined with sampling and describing a profile. If both these activities are not necessary during the drilling procedure then drilling can be executed fast and efficient applying the so-called lost cone drilling method. Eijkelkamp Soil & Water developed a manually controlled set using an electrical percussion hammer to hammer the lost cone and the accompanying casing into the soil.

  • Eijkelkamp - Model 01.08.00.04.B - Spiral Auger, Bottom Part, Bay, Ø4 cm

    Eijkelkamp - Model 01.08.00.04.B - Spiral Auger, Bottom Part, Bay, Ø4 cm

    The spiral auger operates similar to a corkscrew and does not cut off the soil. The auger is usually applied when hard layers need to be penetrated. The spiral auger has a negative end, i.e. the centre of the auger end is whetted away. For profile research (soil mapping) the spiral auger is seldom used. Its use is confined to augering through very hard layers, e.g. boreore, brick layers, chalk and lime profiles in combination with other auger types....

  • Eijkelkamp - Model 02.01.04 - Aluminium Tripod, Cap 20 kN (2000 kgf)

    Eijkelkamp - Model 02.01.04 - Aluminium Tripod, Cap 20 kN (2000 kgf)

    A tripod is an essential part of a bailer boring set (cable tool drilling equipment). Also drillings at greater depths, or the application of heavier augering or soil core sample equipment require the use of a tripod. In selecting a tripod, working height, weight, and maximum load capacity (= tensile force) are usually determinant factors. However, the range of application is of such a magnitude, that the selection of the tripod depends strongly on...