Eijkelkamp Soil & Water

20 products found

Products

  • Sediment Samplers

  • Eijkelkamp - Model 01.09.SA - 5m Piston Sampler Set for Sampling Max

    Eijkelkamp - Model 01.09.SA - 5m Piston Sampler Set for Sampling Max

    The set is very suitable for sampling less cohesive soil layers below the (ground) water table to a depth up to 5 metres. The samples show little disturbance and therefore are suitable for very accurate profile description. With the set 01.09.SA one piston sampler (200 cm) is used with a sample gutter to empty the sampler in. The sampler with various accessories can be transported in the field in a carrying bag.

  • Model 13.50 - Visibility Disc

    Model 13.50 - Visibility Disc

    The visibility disc according to Secchi is a simple, although not very accurate, means of determining the visibility depth. The visibility disc is lowered into the water with a wire. When the disc is no longer visible in the water, a reading of the depth is made by means of the marks on the rope. The disc is lowered another 0.5 meter and is pulled up slowly. The second reading is done when the disc becomes visible. By taking the arithmetic mean from...

  • Model 04.31 - Delft Bottle Suspended Load Sediment Sampler

    Model 04.31 - Delft Bottle Suspended Load Sediment Sampler

    This sampler is used to measure suspended sediment transport in rivers and other water courses, from the surface down to 0.1 m above the river bottom. The sediment containing water flows through a bottle shaped sampler. The shape of this sampling body induces a low pressure at the rear face in such a way, that the water enters the nozzle of the sampler with almost the same velocity as the undisturbed flow. The sharp decrease of the velocity in the...

  • Model 04.29 - Standard Set Free-Fall Corer

    Model 04.29 - Standard Set Free-Fall Corer

    The free-fall corer is a sampling tool for fairly undisturbed sampling from the top layer of submerged sediments either or not consolidated. The free-fall corer consists of a frame with strengthening ribs, falling weight and sampler. Using a hoisting unit (davit) on board of a boat the sampler is lowered in free fall. By its own weight and velocity the apparatus penetrates the submerged soil.

  • Eijkelkamp - Van Dorn Water Sampler

    Eijkelkamp - Van Dorn Water Sampler

    The Van Dorn water sampler (horizontal water bottle) has been specially designed for the sampling of open water. As a result of the material choice, it is also suitable for sampling coastal waters and for the analysis for heavy metals. The horizontal water flow through is not hindered by constrictions so that no appreciable contamination can occur in shallow water. As a result, the sampler is also suitable for measuring parameters in water with solid...

  • Ekman - Model 04.34 - Grab Set

    Ekman - Model 04.34 - Grab Set

    This grab is intended for use in soft sediment that is free from plant growth. Two thin hinging flaps are open while the grab is lowered. The flaps close when a drop-weight is dropped (cable operated) or a button is pressed (rod operated). Samples can, therefore, also be taken from very soft top layers. The pressure of the sample prevents much loss of material. Nevertheless, small stones or stalks may prevent the grab from closing properly, in which...

  • Kemmerer - Model 12.07 - Water Sampler Set

    Kemmerer - Model 12.07 - Water Sampler Set

    The Kemmerer water sampler (vertical water bottle) is used for general water sampling in lakes, channels, wells and the sea. This sampler consists entirely out of plastic parts so that there is no risk of the sample coming into contact with metal. The Kemmerer water sampler holds 1.2 litre.

  • Model 13.51 - Sediment Level Stave, Standard Set

    Model 13.51 - Sediment Level Stave, Standard Set

    The sediment level stave is part of a standard set for measuring the depth of a sediment layer 4 metres. The set comprises 4 sediment measuring rods of anodic aluminium with screw couplings. The rods are 1 m long and have a diameter of 25 mm. The sediment measuring rods are marked out in 5 cm markings. The set also includes an elbow fitting for the measuring rods so that depth measurements in the sediment can be taken at an angle. A stainless steel...

  • Model 75 cm, Bayonet - Piston Sampler

    Model 75 cm, Bayonet - Piston Sampler

    The piston sampler differs completely in design and application from the augers described before and is very suitable for sampling less cohesive soil layers (sand) below the groundwater table. The piston sampler is also suitable for sampling sediments with a sand content.

  • Model 04.15.SB - Hard Soils 7m Liner Sampler Stand Set

    Model 04.15.SB - Hard Soils 7m Liner Sampler Stand Set

    With these sets, with conical screwthread connection, undisturbed soil samples can be taken in a thin walled tube applying a stainless steel core sampler with sample tubes and cutting head. In soft soils the sampler is pressed into the soil, possibly using the push-/pull handle. In hard soils the sampler tube can be driven into the soil using the hammer with two nylon heads (shock-absorbing) or the down-the-hole hammer. The set contains, among other...

  • Watertrap - Model 12.02 - Water Sampler

    Watertrap - Model 12.02 - Water Sampler

    The sampler ‘Watertrap’ has been designed to take representative samples from running water up to a depth of approx. 25 meter. Samples are taken with the stainless steel device by catching part of a horizontal moving column at a certain moment at a certain depth.