Elgin Separation Solutions

18 products found

Elgin Separation Solutions Products

  • Oil and Gas Products

  • Elgin - Model ESS-936HD2 - Barite Recovery & Dewatering Centrifuge

    Elgin - Model ESS-936HD2 - Barite Recovery & Dewatering Centrifuge

    The ESS-936HD2 decanter centrifuge is designed for low volume separation performance. The slim-line design is ideal for placement in small spaces to meet operational needs. Featuring a 15 hp main drive motor and 5 hp back drive motor, four (4) stainless-steel epicentric liquid-end discharge ports, three (3) wide-mouth solids-end discharge ports, and premium gearbox with 40:1 ratio. The bowl is constructed with 304 stainless-steel or carbon steel with...

  • Elgin - Model ESS-1655HD2 - High Speed Fully–Variable Decanter Centrifuge

    Elgin - Model ESS-1655HD2 - High Speed Fully–Variable Decanter Centrifuge

    Elgin’s ESS-1655HD is fitted with a NEMA premium, continuous duty, energy-efficient, poly-chain driven, 60 hp main drive and a direct-coupled 20 hp back-drive. The 60 hp main drive can operate the centrifuge up to 3,400 rpm, therefore generating more than 2,300 G’s of force. Using an inclined motor mount, motor and belt maintenance is made easy by the adjustment of two jack screws. No additional motor mounts, brackets or tensioning devices...

  • Elgin - Model ESS-1967HD2 - High Speed Fully- Variable Decanter Centrifuge

    Elgin - Model ESS-1967HD2 - High Speed Fully- Variable Decanter Centrifuge

    Elgin’s ESS-1967HD2 packs power and performance when operators need it most. Fitted with a NEMA premium, continuous duty, energy-efficient, poly-chain driven, 125 hp main drive and a direct-coupled 40 hp back-drive, the ESS-1967HD2 can operate up to a maximum rotational speed of 3,100 rpm, therefore generating 2,600 G’s of force.

  • Elgin - Model Hyper-G - Shale Shaker

    Elgin - Model Hyper-G - Shale Shaker

    Elgin’s Hyper-G™ Shale Shaker provides power, performance and a new standard in practical design. Capable of producing up to 7 G’s of force and coupled with a variable frequency drive, the Hyper-G™ provides power when you need it.  By adding a single point jacking system and an improved screen fastening system, you now have a shaker that is as easy to operate, as it is powerful.

  • Elgin - 20 Foot Containerized Dewatering and Waste Oil Treatment System

    Elgin - 20 Foot Containerized Dewatering and Waste Oil Treatment System

    As the drilling industry isregulated by a myriad of environmental regulations that continue to become increasingly more stringent, having the right solids control and dewatering equipment has become vital to successful drilling operations. Dewatering presents a great deal of benefits and advantages. One such benefit includes discharge compliance, in which many cases result in a “zero-discharge” or “closed-loop system.” In...

  • Elgin - 40 Foot Containerized Dewatering and Waste Oil Treatment System

    Elgin - 40 Foot Containerized Dewatering and Waste Oil Treatment System

    As the drilling industry is regulated by a myriad of environmental regulations that continue to become increasingly more stringent, having the right solids control and dewatering equipment has become vital to successful drilling operations. Dewatering presents a great deal of benefits and advantages. One such benefit includes discharge compliance, in which many cases result in a “zero-discharge” or “closed-loop system.” In...

  • Elgin - Polymer Injection / Chemical Mixing Systems

    Elgin - Polymer Injection / Chemical Mixing Systems

    Polymer injection is key to efficient liquid/solid separation when dewatering in a ‘closed-loop zero discharge’ environment. Furthermore, the addition of polymers during operation allows the operator, to recover water from the fluid maximizing profits.

  • Elgin - Model Hyper-G - Mud Cleaner

    Elgin - Model Hyper-G - Mud Cleaner

    With the combination of a desander and desilter mounted over a powerful multi-functional Hyper-G™ shaker, Elgin’s line of mud cleaners offer both high performance and versatility for the operator. This integration of advanced equipment puts forth a unit that can handle large volumes of circulating fluids and is able to retain fluid integrity.

  • Elgin - Model ESS-1655XP and ESS-1967XP Polisher - Mobile Polishing Systems

    Elgin - Model ESS-1655XP and ESS-1967XP Polisher - Mobile Polishing Systems

    With over 25 years of experience in the designing and manufacturing of reliable solids control equipment, Elgin understands the need for mobile ultra-fine solids management. The key to an effective solids control system starts with the control of fines. Uncontrollable fines increase equipment wear, lower the drilling rate of penetration, and can significantly hamper the rig’s push/pull capabilities.

  • Elgin - Model ESS-DG-600 and ESS-DG-1200 - Vacuum Degasser

    Elgin - Model ESS-DG-600 and ESS-DG-1200 - Vacuum Degasser

    The vacuum degasser is the most common form of degassing systems used in the oil & gas industry. Drillng fluid is pulled into the tank by vacuum action. The fluid rises inside the tank and is distributed over a series of plates which releases the gas bubbles from the drilling fluid. The gas is pumped out of the system and the fluid transferred to hydrocyclones or a centrifuge for further processing.

  • Elgin - Model ESS-SM-500 - High Efficiency Jet-Shear Mixing Systems

    Elgin - Model ESS-SM-500 - High Efficiency Jet-Shear Mixing Systems

    Using our unique history as a provider of performance chemicals, Elgin has developed a line of drilling fluid jet shear systems. Jet shear systems are designed to use hydraulic shear to efficiently mix solids with liquids.  Elgin’s jet shear systems ensure efficient mixing of soluble polymers and bentonite used in water-based drilling fluids, therefore, eliminating “fish eyes.” Drilling fluid yield and gel strength...

  • Elgin - Model ESS-48STD MC - Polyurethane Molded Hydrocyclones

    Elgin - Model ESS-48STD MC - Polyurethane Molded Hydrocyclones

    Elgin’s polyurethane molded hydrocyclones are available in a number of configurations, ranging from 60 gpm systems to 2,000 gpm systems and capable of achieving a solids cut point of 25 microns. Each hydrocyclone is made of high durameter, durable polyurethane and can be fitted with independent valve isolation, discharge deflection devices, and pressure monitoring systems. For abrasive solids, Elgin can also fit our polyurethane hydrocyclones...

  • Elgin - Centrifugal Pumps

    Elgin - Centrifugal Pumps

    Price, power consumption, efficiency, and ease of use are main concerns that customers have when purchasing pumps. Elgin recognizes this and maintains a complete line of Series 118 & 250 high performance centrifugal pumps.

  • Elgin - Composite Shaker Screens

    Elgin - Composite Shaker Screens

    New technology has advanced shaker screen construction using composite material with steel reinforcements. Composite shaker screens provide increased performance, longer life-span, and stronger resistance to delamination. In traditional steel-frame manufacturing, when using powder-coat, the applied temperature is lower than when the product is molded, as are composite screens. Thus, causing the surface tension of the screen to decrease leading to...

  • Elgin - Model KTPC-NM063-P101 and KTPC-NM090-P101 - Progressive Cavity Feed Pumps

    Elgin - Model KTPC-NM063-P101 and KTPC-NM090-P101 - Progressive Cavity Feed Pumps

    To ensure a well-balanced feed with consistent feed pressure, Elgin can supply a variety of custom-configured progressive-cavity feed pumps (“PC pumps”).  PC pumps can extend the life of a centrifuge and reduce overall operations and maintenance costs when properly operated. Elgin PC Pump packages can be supplied in a variety of skid configurations (i.e. wide field skid and narrow plant skid) and a variety of motor installation...

  • Elgin - Self-Priming Pumps

    Elgin - Self-Priming Pumps

    Based on one of the industry’s most field-proven pump configurations, Elgin’s line of self-priming solids-handling pumps offer a trouble-free, non-clogging design. The large volute automatically reprimes in a fully open system, without the need for complicated suction or discharge plumbing. Elgin recognizes the need for reliable and efficient self-priming pumps. Elgin’s line of self-priming, solids-handling pumps have been designed...

  • Elgin - Model KTDSN & KTDSL Series - Drilling Fluid Mud Cleaning System

    Elgin - Model KTDSN & KTDSL Series - Drilling Fluid Mud Cleaning System

    With the combination of a desander and desilter mounted over a powerful multi-functional shaker, Elgin’s line of mud cleaners offer both high performance and versatility for the operator. This integration of advanced equipment puts forth a unit that can handle large volumes of circulating fluids and is able to retain fluid integrity. Features such as our wedge-lock fastening system, mud bypass gate, and explosion proof enclosures all allow for...