Endress Hauser AG

43 products found

Endress Hauser AG Products

  • System Products

    Product overview system products and data managers. Nowadays the requirements on measurement technology go far beyond the mere recording of measurement values. Thus the measuring devices are to be supplied with power and to be protected against overvoltage, the measurement value is to be visualized or processed, limit values have to be monitored as well as the data has to be tamper-proof archived. These tasks are covered by the system products and data managers from Endress+Hauser.

  • HART - Model RIA15 - Loop-Powered Indicator for 4…20 mA or HART Signals

    HART - Model RIA15 - Loop-Powered Indicator for 4…20 mA or HART Signals

    The process indicator is available with 4...20 mA or with HART protocol. In the HART version up to 4 measured values of one sensor can be indicated in alternation. For this the indicator can be set as primary or secondary HART master and actively inquire the values from the sensor. The small voltage drop of < 1V (< 1.9 V with HART) is a huge advantage especially in Ex-applications, where in most cases only a reduced voltage is...

  • Endress+Hauser - Model RMA42 - Process Transmitter with Control Unit

    Endress+Hauser - Model RMA42 - Process Transmitter with Control Unit

    Universal transmitter, loop power supply, barrier and limit switch in one device. Analog measured values are indictated, evaluated and calculated by the process transmitter. With the integrated loop power supply two-wire sensors can be powered. The universal inputs enable the connection of current, voltage, RTDs and TCs. Limit values can be monitored and relays can be switched. Via analog outputs process signals can be forwarded. The integrated...

  • Model RN221N - Active Barrier with Optional HART Diagnosis

    Model RN221N - Active Barrier with Optional HART Diagnosis

    Active barrier with power supply for safe separation of 4...20 mA current circuits. The active barrier RN221N supplies e.g. a transmitter with power, if required also in the Ex-area, and then transmits the galvanically isolated signal. With the optionally available HART® monitoring the status of the transmitter is monitored. If an error arises a relay at the RN221N sends an alarm. The relay has to be actively set back. Thus even just briefly...

  • Ecograph - Model T RSG35 - Universal Graphic Data Manager

    Ecograph - Model T RSG35 - Universal Graphic Data Manager

    Paperless recording, visualization and monitoring of the process values at the same time. Safe and complete recording and visualization of all process sequences. Demands on process monitoring and data recording are becoming more and more complex. Because every measurement value counts, the Universal Data Manager Ecograph T RSG35 records, visualizes and monitors all analog or digital input signals. The unit is easy to use and comes with features to...

  • Memograph - Model M RSG45 - Advanced Data Manager

    Memograph - Model M RSG45 - Advanced Data Manager

    Saves, visualizes, analyzes and communicates. The Advanced Data Manager is a flexible and powerful system for organizing process values. Thanks to its intuitive operation, the Memograph M adapts quickly and easily to every application. The measured process values are clearly presented on the display and logged safely, limits are monitored and analyzed. Via common communication protocols, the measured and calculated values can be easily communicated to...

  • Field Xpert - Model SMT70 - Universal, High-Performance Tablet PC for Device Configuration

    Field Xpert - Model SMT70 - Universal, High-Performance Tablet PC for Device Configuration

    The Field Xpert SMT70 tablet PC for device configuration enables mobile plant asset management in hazardous and non-hazardous areas. It is suitable for commissioning and maintenance staff to manage field instruments with a digital communication interface and to record progress. This tablet PC is designed as a complete solution that comes with pre-installed driver libraries and is an easy-to-use,...

  • Model RIA14 - Loop-Powered Field Indicator

    Model RIA14 - Loop-Powered Field Indicator

    Excellent readable indication of a 4…20 mA signal on-site for a better process overview! The indicator shows the measured signal on the large, backlit display. An additional bar graph gives a quick process overview and a plain text field displays further information like the engineering unit or TAG. Limit value infringements are also signalized and an open collector can be switched. No separate power supply is required, the indicator is powered...

  • Model RIA16 - Loop-Powered Indicator

    Model RIA16 - Loop-Powered Indicator

    Excellently readable indication of 4…20 mA signal with trend bar graph for a better process overview. The indicator shows the measured signal on the large, backlit display. A bar graph indicates the value graphically for a quick process overview. An editable plain text field displays further information like engineering unit or TAG. Limit value infringement is also signalized and an open collector can be switched. The indicator is powered...

  • EngyCal - Model RS33 - Steam Calculator

    EngyCal - Model RS33 - Steam Calculator

    Steam calculator for recording steam mass and energy flow for saturated or superheated steam. The steam calculator EngyCal RS33 is used to record steam mass and energy flow of saturated and superheated steam. The calculation is based on the measured process variables volume flow, temperature and/or pressure. The EngyCal RS33 uses the standard IAPWS IF97 to calculate the mass and energy flow of steam. The density and enthalpy of the steam are...

  • Fieldgate - Model SFG500 - Intelligent Ethernet/PROFIBUS Gateway

    Fieldgate - Model SFG500 - Intelligent Ethernet/PROFIBUS Gateway

    Parallel access to PROFIBUS networks, monitoring of PROFIBUS and HART device status. Fieldgate SFG500 is a system component that provides an independent access route to a PROFIBUS network. It may be used in a variety of applications that are supported by specific operating modes. Fieldgate SFG500 may be used in a variety of applications that are supported by specific operating modes. The operating modes are determined by the use of an optional memory...

  • Field Xpert - Model SFX350 - Mobile Plant Asset Management

    Field Xpert - Model SFX350 - Mobile Plant Asset Management

    Mobile Plant Asset Management simplifies and optimizes commissioning and maintenance workflows. Field Xpert is an industrial PDA with integrated touchscreen for commissioning and maintaining field devices in explosion hazardous and safe areas*. It allows efficient configuration of FOUNDATION fieldbus, HART 5/6/7 and WirelessHART devices via Bluetooth and/or Wifi interfaces. From an application oriented view, Field Xpert is the mobile platform...

  • Field Xpert - Model SFX370 - Mobile Plant Asset Management

    Field Xpert - Model SFX370 - Mobile Plant Asset Management

    Mobile Plant Asset Management simplifies and optimizes commissioning and maintenance workflows. Field Xpert is an industrial PDA with integrated touchscreen for commissioning and maintaining field devices in explosion hazardous and safe areas*. It allows efficient configuration of FOUNDATION fieldbus, HART 5/6/7 and WirelessHART devices via Bluetooth and/or Wifi interfaces. From an application oriented view, Field Xpert is the mobile platform for...

  • Model SOP300 - Overfill Prevention System

    Model SOP300 - Overfill Prevention System

    For reliable and secure tank overfill prevention. The Overfill Prevention System complies with API2350 and WHG. It works as automatic or manual system and can detect signals for overflow, pump protection and leakage in the base of the tank and issue alarms. If a defined level is overshot/undershot, or if a leak is detected, the system automatically activates signaling elements and outputs relevant messages on a display. The system is designed for up...

  • WirelessHART - Model SWA70 - Adapter

    WirelessHART - Model SWA70 - Adapter

    Smart WirelessHART interface module with power supply for field devices. The WirelessHART Adapter SWA70 is an interface module for the wireless transmission of 4 to 20 mA/HART signals from connected field devices to a WirelessHART Fieldgate. It is powered by either a battery pack or power supply units. The WirelessHART Adapter can be used in hazardous and non-hazardous area for applications.

  • WirelessHART Fieldgate - Model SWG70 - Gateway with Ethernet and RS-485 Interfaces

    WirelessHART Fieldgate - Model SWG70 - Gateway with Ethernet and RS-485 Interfaces

    Intelligent WirelessHART gateway with Ethernet and RS-485 interfaces. Endress+Hauser's WirelessHART Fieldgate SWG70 has been designed to act as interface between a system using Ethernet or RS-485 physical layer and WirelessHART network. The gateway is designed for mounting in explosion hazardous areas Zone 2. An integral or remote antenna can be mounted according to the needs of the application.

  • Model HAW562 - Surge Arrester

    Model HAW562 - Surge Arrester

    Surge arrester for DIN rail according to IEC 60715. The HAW562 surge arrester is used to protect electronic components from being destroyed by overvoltage. It ensures that overvoltage surges which occur in signal cables (e.g. 4 to 20 mA), in communication lines (fieldbuses) and in power lines are safely passed into the ground. The functionality of the transmitter or the electronics component to be protected is not affected.

  • Model HAW569 - Surge Arresters for Field Mounting

    Model HAW569 - Surge Arresters for Field Mounting

    The HAW569 surge arrester is used to protect electronic components in field devices from being destroyed. It ensures that overvoltage surges which occur in signal cables (e.g. 4 to 20 mA), in communication lines of Field buses (HART, PA, FF) and in power lines are safely passed into the ground. The functionality of the electronic component to be protected is not affected as, using the impedance-free...

  • Model RA33 - Batch Controller

    Model RA33 - Batch Controller

    Recording and controlling of batch operations. The Batch Controller RA33 is designed to record flow and control output signals for valves and pumps to ensure the exact dosing of predefined batch quantities. The measured volume can be corrected with the temperature/density compensation function. The filling process can be optimized with an automatic or fixed after-run correction. Mineral oils can be corrected according to the ASTM D1250-04 standard.

  • Model RB223 - Loop Powered Passive Barrier

    Model RB223 - Loop Powered Passive Barrier

    One or two-channel barrier for the safe separation of 4...20 mA standard signal circuits. The RB223 passive barrier can be used to galvanically isolate active signal circuits (0 to 20 mA) in three applications: Transmission from non-Ex to Ex areas e.g for active adjusters, controllers or indicators, Transmission from Ex to non-Ex areas for connection of active, intrinsically safe circuits to the PLC, Transmission from Ex to non-Ex areas for supply of...

  • Model RIA45 - Process Meter with Control Unit

    Model RIA45 - Process Meter with Control Unit

    Multifunctional panel mounted process meter for monitoring and indication of analog measured values. Analog measured values are indicated, evaluated and calculated by the process meter. With the integrated loop power supply two-wire sensors can be powered. The universal inputs enable the connection of current, voltage, RTDs and TCs. Limit values can be monitored and relays can be switched. Via analog outputs process signals can be forwarded. The...

  • Model RIA46 - Field Meter with Control Unit

    Model RIA46 - Field Meter with Control Unit

    Multifunctional field meter for monitoring and indication of analog measured values. Analog measured values are indicated, evaluated and calculated by the field indicator. With the integrated loop power supply two-wire sensors can be powered. The universal inputs enable the connection of current, voltage, RTDs and TCs. Limit values can be monitored and relays can be switched. Via analog outputs process signals can be forwarded. The integrated...

  • Model RID14 - 8 Channel Field Indicator for Fieldbuses

    Model RID14 - 8 Channel Field Indicator for Fieldbuses

    Indication of up to 8 process or calculated values for FOUNDATION Fieldbus or PROFIBUS PA protocol. The 8 channel indicator shows measured and calculated values and status information of the fieldbus users in a FOUNDATION Fieldbus™ or PROFIBUS® PA network. In the listener mode the device listens to the set fieldbus addresses and indicates their values. In addition, for FOUNDATION Fieldbus™ values available on the bus can be indicated...

  • Model SOP600 - Overfill Prevention System

    Model SOP600 - Overfill Prevention System

    SIL2/SIL3 Tank overfill prevention – for reliable and secure tank overfill protection. The Overfill Prevention System SOP 600 complies with API2350 and WHG and is type-certified up to SIL3 according to IEC 61511. It works as automatic or manual system, can detect signals for overflow, pump protection and leakage in the base of the tank and issue alarms. If limit values are violated or leaks detected, the system activates signaling elements and...

  • Model SPV350 - Profile Vision Compact

    Model SPV350 - Profile Vision Compact

    Interface and density profile measurement in separation vessels. Profile Vision Compact gives users a detailed insight into their separation processes. It is the perfect solution for full monitoring of interfaces and emulsion layers of different density. With this system, continuous density profiles and interface levels can be visualized easily and clearly. The results can be implemented quickly into a DCS for further process optimization and...

  • Smart System for Surface Water

    Smart System for Surface Water

    Package of smart sensors that measure the surface water quality in lakes or rivers. The Smart System for Surface Water makes it possible to monitor the water quality in lakes or rivers. The package consists of smart sensors and connectivity to communicate the water quality parameters to the user. The user receives all information on his smartphone after installing the Smart Systems App. This way the user can then remotely analyze the surface water...

  • Model RID16 - 8 channel field indicator for fieldbuses

    Model RID16 - 8 channel field indicator for fieldbuses

    Indication of up to 8 process or calculated values for FOUNDATION Fieldbus™ or PROFIBUS® PA protocol. The 8 channel indicator shows measured and calculated values, and status information of the fieldbus users in a FOUNDATION Fieldbus™ or PROFIBUS® PA network. In the listener mode the device listens to the set fieldbus addresses and indicates their values. In addition, for FOUNDATION Fieldbus™ values available on the bus can...

  • Model RIA452 - Process Indicator with Pump Control

    Model RIA452 - Process Indicator with Pump Control

    Digital process meter in panel mounted housing for monitoring and displaying analog measured values. The process meter monitors and displays the analog measured values. Pumps can be monitored with the digital status inputs. The RIA452 can provide power directly to two-wire sensors connected. Up to eight freely programmable relays monitor the measured value. Other operating modes for the relays include sensor or device malfunction, batch and pump...

  • Model RNB130 - Primary Switched-Mode Power Supply for DIN Rail

    Model RNB130 - Primary Switched-Mode Power Supply for DIN Rail

    Power supply for one 4 wire sensor or transmitter. The power supply has one output for supplying voltage to 4 wire sensors and transmitters. Connection to mono-phased a.c. networks or to two phase conductors of three-phase supply networks (TN-, TT- or IT-networks as per VDE 0100 T 300/IEC 364-3) with 100-240 V AC nominal voltage possible.

  • Model RNS221 - Transmitter Supply for DIN Rail

    Model RNS221 - Transmitter Supply for DIN Rail

    Power supply for two 2 wire sensors or transmitters. The power supply has two galvanically isolated outputs for supplying voltage to sensors and transmitters. A built-in communication resistance enables bidirectional HART® communication with SMART sensors and transmitters.

  • Model RTA421 - Limit Switch

    Model RTA421 - Limit Switch

    Contactor with loop power supply for monitoring current or voltage signals. The RTA421 contactor monitors industrial processes for safe operation. The unit analyzes current (0/4...20 mA) and voltage signals (0/2...10 V) and switches two independent output relays if the values either exceed or undercut the preset alarm set points. On the display both limit values are indicated in parallel. The bar graph informs on the connected signal at any time....

  • Minilog - Model B, RDL10 - Data Logger

    Minilog - Model B, RDL10 - Data Logger

    Data logger for display and storing measured values from an analog and digital input. Data logger for stand-alone applications. The Minilog B is used to display and record measured data from an analog and digital input signal. It can be applied where a compact data logger is needed. In addition to data storage the data logger also monitors two set points. Violation of these set values are indicated in the display. Additionally it is possible to...

  • Connect Sensor - Model FXA30B - Gateway for Remote Monitoring

    Connect Sensor - Model FXA30B - Gateway for Remote Monitoring

    Battery-powered remote cellular monitoring of connected field devices. Connect Sensor FXA30B is a fully integrated, battery-powered cellular gateway with inputs for connecting to a wide range of field devices. Designed to work in rugged industrial environments, the FXA30B is the ideal solution for remote monitoring in places where power is not easily available. It can even be used as power supply for the field device and measured values can be...

  • Fieldgate - Model FXA42 - Gateway for Measurement Values

    Fieldgate - Model FXA42 - Gateway for Measurement Values

    Communication of measurement values of connected 4 to 20mA analog as well as digital field devices. Fieldgate FXA42 is developed for monitoring of field devices with digital or 4 to 20mA interface regardless of location. It supports communication interfaces like WLAN, 3G as well as Modbus. With its integrated web server technology it can easily be configured online and measured values can be visualized online. FXA42 also offers data logging and alarm...

  • Promonitor - Model NRF560 - Monitoring and Controlling

    Promonitor - Model NRF560 - Monitoring and Controlling

    For tank side monitoring and controlling of Proservo NMS5 intelligent tank gauge. The Promonitor NRF560 is a monitoring unit for use with the Proservo series of tank gauges. Mounted at the tank side or up to 1,200 meters away (local HART connection). Promonitor provides indication of measured level, temperature data and operating status, and can send operating commands to the Proservo NMS5 from a convenient location.

  • Model NRF590 - Tank Gauging Tank Side Monitor

    Model NRF590 - Tank Gauging Tank Side Monitor

    Field gateway for tank sensor operation and monitoring and integration into inventory control system. The Tank Side Monitor NRF590 is a sensor integration and monitoring unit for bulk storage tank gauging applications. It can be used with Micropilot radar or Proservo level gauges and can be combined with other HART compatible devices to communicate tank sensor data to a control host. Various selectable alarms and outputs.

  • Model NRF81 - Tank Gauging Tank Side Monitor

    Model NRF81 - Tank Gauging Tank Side Monitor

    Field gateway for tank sensor operation, monitoring and integration into inventory control system. The Tank Side Monitor NRF81 is a sensor integration and monitoring unit for bulk storage tank gauging applications. It integrates various level, temperature and pressure tank sensor data into a control host system. Various selectable alarms and outputs.

  • Tankvision - Model NXA820 - Inventory Management Tank Scanner

    Tankvision - Model NXA820 - Inventory Management Tank Scanner

    Acquires data from field instruments. The Tank Scanner NXA820 scans parameters from tank gauges and performs tank calculations as one part of Tankvision. Tankvision is a tank inventory system which is operated by a standard web browser and does not require proprietary software or licensing costs. Tankvision is based on a distributed architecture on a local area network (LAN). Due to its modular structure it is ideally suited for small tank farms with...

  • Tankvision - Model NXA821 - Inventory Management Data Concentrator

    Tankvision - Model NXA821 - Inventory Management Data Concentrator

    Consolidates data from connected Tank Scanners NXA820. The Data Concentrator NXA821 summarizes data from various Tank Scanners NXA820 as one part of Tankvision. Tankvision is a tank inventory system which is operated by a standard web browser and does not require proprietary software or licensing costs. Tankvision is based on a distributed architecture on a local area network (LAN). Due to its modular structure it is ideally suited for small tank...

  • Tankvision - Model NXA822 - Inventory Management Host Link

    Tankvision - Model NXA822 - Inventory Management Host Link

    Communicates data to other system (Modbus). The Host Link NXA822 provides data to host systems (such as PLC or DCS) via Modbus as one part of Tankvision. Tankvision is a tank inventory system which is operated by a standard web browser and does not require proprietary software or licensing costs. Tankvision is based on a distributed architecture on a local area network (LAN). Due to its modular structure it is ideally suited for small tank farms with...

  • Tankvision - Model NXA83 - Inventory Management Multi Scan

    Tankvision - Model NXA83 - Inventory Management Multi Scan

    Acquires data from field instruments and communicates data to other system (Modbus or OPC). The Multi Scan NXA83 scans parameters from tank gauges and performs tank calculations as one part of Tankvision. For a step by step site upgrade, the Multi Scan allows legacy protocol management as well as gradual upgrades for more flexibility. Tankvision is based on a distributed architecture on a local area network (LAN). Due to its modular structure it is...

  • Fieldgate PAM - Model SFG600 - Device Configuration Management Gateway

    Fieldgate PAM - Model SFG600 - Device Configuration Management Gateway

    The Fieldgate PAM SFG600 is a device configuration management gateway and supports HART devices via PROFINET networks. The HART devices must have a unique device TAG. The devices must be in operation with a PROFINET controller and operated via the Siemens assembly ET 200SP with the 4xl 2-wire HART analog modules with HART capabilities. During production, the Fieldgate is configured with the IP address supplied by the customer at the field network...

  • Field Xpert - Model SMT77 - Tablet PC for Device Configuration

    Field Xpert - Model SMT77 - Tablet PC for Device Configuration

    Universal, high-performance tablet PC for device configuration in Ex Zone 1 areas. The Field Xpert SMT77 tablet PC for device configuration enables mobile plant asset management in hazardous and non-hazardous areas. It is suitable for commissioning and maintenance staff to manage field instruments with a digital communication interface and to record progress. This tablet PC is designed as a complete solution that comes with pre-installed driver...