ENEXIO Water Technologies GmbH

7 Articles found

ENEXIO Water Technologies GmbH Articles

indicates free access

  • Optimised Legionella protection for cooling towers - Enhanced safety in five steps

    Optimised Legionella protection for cooling towers - Enhanced safety in five steps

    Poorly maintained cooling towers and evaporative condensers, coupled with old pipe systems or boilers,are one of the breeding grounds that can contribute to the spread of Legionella-containing aerosols. Plant operators can significantly reduce this ...

    Lambert Bosche

  • Increase of settling performance in rainwater overflow basins with ENEXIO 2H TUBEdek® lamella separators

    Increase of settling performance in rainwater overflow basins with ENEXIO 2H TUBEdek® lamella separators

    • Rainwater overflow basins are more frequently being equipped with lamella separators • Increase in plant performance promotes the integration of sedimenta-tion tanks in urban environments • 2H TUBEdek® lamella separators have ...

  • Increase in sewage treatment performance with ENEXIO 2H BIOdek®-IFAS fills for activated sludge basins

    Increase in sewage treatment performance with ENEXIO 2H BIOdek®-IFAS fills for activated sludge basins

    Increase in output of up to 35 % in activated sludge basins Simple retrofitting during operation See 2H technology this year at IFAT in Munich The use of fills from ENEXIO Water Technologies GmbH (formerly GEA 2H Water Technologies) can ...

  • German research underway on trickling filter practices

    German research underway on trickling filter practices

    Trickling filter technology is one focus of a joint research project – EXPOVAL – funded by the German government that will validate engineering guidelines and optimum conditions for achieving high performance. Dr. Christian-Dominik ...

  • Higher Mass Transfer Performance

    Higher Mass Transfer Performance

    Technology - The design of air/water counterflow mass transfer devices with high specific surface polypropyl ene packings, used to enlarge the transfer surface, is frequently based on the pure-component data of the involved components of water, air ...

    Nina Woicke;Michal Mueller;Marco Puschmann

  • CO2 Reduction by Cooling Tower Retrofit Measures

    CO2 Reduction by Cooling Tower Retrofit Measures

    Abstract: In the course of a cooling tower retrofit a cold-end-optimisation should be done. Due to installing best available technology of cooling fills a decrease of cooling water temperature and additional power output can be generated. The ...

    Falk Mohasseb;Heiko Stiens;Gabriel Reymann;Mathias Braunsburger;Jörg Torkar

  • Plume simulation of natural draught cooling towers

    Plume simulation of natural draught cooling towers

    Abstract: This paper deals with the setup of numeric calculations to estimate the plume of natural draught cooling towers. The incorporation of several physical effects and boundary conditions and possible ways of measuring or estimating them will ...

    Karsten Grasemann;Falk Mohasseb;Norbert Wieners;Gabriel Reymann